• 정보보호학회논문지
• /
• 제21권1호
• /
• pp.3-14
• /
• 2011

공공의 서버를 통한 자료의 공유는 사용자들의 편리성을 증가시킨 반면 저장된 데이터에 대한 접근통제 문제와 신뢰할 수 없는 서버에 대한 사용자들의 프라이버시 노출 문제 등의 새로운 문제를 야기한다. 다자간 환경에서 사용자 프라이버시를 보장하면서도 사용자간의 데이터 공유를 하기 위해서 키워드 검색이 가능한 암호화 방식이 사용된다. 특히, 이런 다자간 환경에서는 탈퇴한 사용자들이 더 이상 키워드 검색이나 저장된 데이터를 접근할 수 없도록 탈퇴한 사용자에 대한 안전성을 고려해야 한다. 하지만 기존의 다자간 환경에서 제안된 키워드 검색 암호화 방식은 탈퇴한 사용자가 정당한 사용자와 서버가 통신하는 암호화 메시지를 보고서 공유 데이터를 복구할 수 있는 문제점을 가지고 있다. 본 논문에서 제안하는 기법은 이런 문제점들을 해결한 탈퇴한 사용자에 대한 안전성을 보장하는 키워드 검색기법이다.

• 한국콘텐츠학회논문지
• /
• 제10권5호
• /
• pp.52-61
• /
• 2010

최근에 세계적으로 다중사용자시스템(Multi-User System, MUS)에 대한 수요가 꾸준히 증가하고 있다. 다중사용자시스템은 한대의 컴퓨터본체에 여러 개의 디스플레이어와 키보드, 마우스 등 입출력장치들을 연결하여 여러 명의 사용자가 동시에 이용할 수 있게 하는 시스템이다. 다중 사용자 시스템에서 보안은 해결해야 할 중요한 문제 중의 하나이다. 본 연구에서는 다중 사용자 환경에서 사용자 편의성 중심의 설계와 다양한 보안 기능을 제공하는 시스템을 제안한다. 시스템은 마이크로소프트사에서 개발된 NTFS 파일 시스템 기반에서 작동하며 NTFS 파일 시스템의 복잡한 보안 설정 기능을 단순화 하여 사용자 편의성을 높인다. 기본적으로 윈도우즈 시스템과 같이 중요한 폴더에 대해서는 개인 폴더 설정이 안 되고 다른 사용자간에 개인 폴더 설정의 충돌을 방지하기 위한 다양한 정책을 제안한다. 접근 금지 폴더를 지정하여 아무도 개인 폴더로 지정할 수 없는 공간을 설정하는 기능도 제공한다.

• Journal of Communications and Networks
• /
• 제17권3호
• /
• pp.267-274
• /
• 2015

Due to the difficulty of coordination in the cellular uplink, it is a practical challenge how to achieve the optimal throughput scaling with distributed scheduling. In this paper, we propose a distributed and opportunistic user scheduling (DOUS) that achieves the optimal throughput scaling in a single-input multiple-output interfering multiple-access channel, i.e., a multi-cell uplink network, with M antennas at each base station (BS) and N users in a cell. In a distributed fashion, each BS adopts M random receive beamforming vectors and then selects M users such that both sufficiently large desired signal power and sufficiently small generating interference are guaranteed. As a main result, it is proved that full multiuser diversity gain can be achieved in each cell when a sufficiently large number of users exist. Numerical evaluation confirms that in a practical setting of the multi-cell network, the proposed DOUS outperforms the existing distributed user scheduling algorithms in terms of sum-rate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권5호
• /
• pp.1238-1259
• /
• 2024

Previous studies on joint optimization of computation offloading and service caching policies in Mobile Edge Computing (MEC) have often neglected the impact of dependency-aware subtasks, edge server resource constraints, and multiple users on policy formulation. To remedy this deficiency, this paper proposes a many-objective joint optimization dependency-aware task offloading and service caching model (MaJDTOSC). MaJDTOSC considers the impact of dependencies between subtasks on the joint optimization problem of task offloading and service caching in multi-user, resource-constrained MEC scenarios, and takes the task completion time, energy consumption, subtask hit rate, load variability, and storage resource utilization as optimization objectives. Meanwhile, in order to better solve MaJDTOSC, a many-objective evolutionary algorithm TSMSNSGAIII based on a three-stage mating selection strategy is proposed. Simulation results show that TSMSNSGAIII exhibits an excellent and stable performance in solving MaJDTOSC with different number of users setting and can converge faster. Therefore, it is believed that TSMSNSGAIII can provide appropriate sub-task offloading and service caching strategies in multi-user and resource-constrained MEC scenarios, which can greatly improve the system offloading efficiency and enhance the user experience.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.1973-1991
• /
• 2018

Multimedia applications over wireless networks have been evolving to augmented reality or virtual reality services. However, a rich data size compared to conventional multimedia services causes bandwidth bottlenecks over wireless networks, which is one of the main reasons why those applications are not used widely. To overcome this limitation, bandwidth aggregation techniques, which exploit a multi-path transmission, have been considered to maximize link utilization. Currently, most of the conventional researches have been focusing on the user end problems to improve the quality of service (QoS) through optimal load distribution. In this paper, we address the joint pricing and load distribution problem for multi-homing in heterogeneous wireless access networks (ANs), considering the interests of both the users and the service providers. Specifically, we consider profit from resource allocation and cost of power consumption expenditure for operation as an utility of each service provider. Here, users decide how much to request the resource and how to split the resource over heterogeneous wireless ANs to minimize their cost while supporting the required QoS. Then, service providers compete with each other by setting the price to maximize their utilities over user reactions. We study the behaviors of users and service providers by analyzing their hierarchical decision-making process as a multileader-, multifollower Stackelberg game. We show that both the user and service provider strategies are closed form solutions. Finally, we discuss how the proposed scheme is well converged to equilibrium points.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.46-55
• /
• 2008

In this paper, we designed the bay control unit that is based on the microprocessors and integrates with the new technology of electrical, electronic, and mechanical fields. Nowadays the customers have required much more integrated multi-protection relay, monitoring, control devices and power management for better and easier maintenance, performance, electrical system analysis and communication according to new trend of switchboard This bay controller supplies those requirements of customers with easy handling and operation. This bay controller provides a graphic display with rear-lit liquid crystal LCD and push buttons as kinds of HMI(Human Machine Interface). This bay controller provides the parameter setting program, control setting program, various editors and fault recording and analysis program on Windows/95/98/NT/2000/XP for HMI. In addition, this bay controller can be set manually and this manual setting function helps user to interface easily.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권11호
• /
• pp.5625-5641
• /
• 2017

Certificateless public key cryptography resolves the certificate management problem in traditional public key cryptography and the key escrow problem in identity-based cryptography. In recent years, some good results have been achieved in speeding up the computation of bilinear pairing. However, the computation cost of the pairing is much higher than that of the scalar multiplication over the elliptic curve group. Therefore, it is still significant to design cryptosystem without pairing operations. A multi-signer universal designated multi-verifier signature scheme allows a set of signers to cooperatively generate a public verifiable signature, the signature holder then can propose a new signature such that only the designated set of verifiers can verify it. Multi-signer universal designated multi-verifier signatures are suitable in many different practical applications such as electronic tenders, electronic voting and electronic auctions. In this paper, we propose a certificateless multi-signer universal designated multi-verifier signature scheme and prove the security in the random oracle model. Our scheme does not use pairing operation. To the best of our knowledge, our scheme is the first certificateless multi-signer universal designated multi-verifier signature scheme.

• Asia pacific journal of information systems
• /
• 제14권3호
• /
• pp.121-144
• /
• 2004

Developing a personalized system on a user's behalf which is working around the Internet-based marketplace is one of the challenging issues in intelligent e-business, especially mobile commenrce. It has been highly recommended that such a mobile personalized system has to perceive the user's needs a priori by tracking user's current context such as location with activity and then to identify the current needs dynamically and proactively. Automatically and unobtrusively getting user's context is an inevitable feature for the development of autonomous mobile commenrce. However, personalization methodologies and their feasible architectures for context-aware mobile commerce have been so far very rare. Hence, this paper aims to propose a context-aware mobile commerce development methodology by applying agent and semantic web technologies for personalized reminder system, which is one of the mobile commerce support system. We revisited associationism to understand a buyer's need identification process and adopt the process as 'purchase based on association' to implement a personalized reminder system. Based on this approach, we have showed how the agent-based semantic web service system can be used to realize need-aware reminder system. NAMA(Need-Aware Multi-Agent), a prototype system, has been implemented to show the feasibility of the methodology and framework under mobile setting proposed in this paper. NAMA embeds bluetooth-based location tracking module and identify what a user is currently looking at through her/his mobile device such as PDA. Based on these capabilities, NAMA considers the context, user profile with preferences, and information about currently available services, to aware user's current needs and then link her/him to a set of services, which are implemented as web services.

• 산업공학
• /
• 제10권1호
• /
• pp.135-143
• /
• 1997

The importance of training for NC, CNC and Machining Center has been greatly increased. This paper presents implementation of a DNC(Direct Numerical Control) operating software for educational system. This system is able to connect 8-32 CNCs to Control PC with RS232 multi-port serial card. Therefore, it allows much efficiency in training even after costs are considered. The KISCO DNC S/W for above system includes various communication functions, communication parameters setting, program editor and user-friendly environment. This software was developed with C and Windows programming. It was proved in function and stability by iterative field tests.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1328-1331
• /
• 1996

The importance of training for NC, CNC and Machining Center has been greatly increased. This paper presents implementation of a DNC system and operating software for educational purpose. This system is able to connect 8-32 CNCs to Control PC with RS232 multi-port serial card. Therefore, it allows much efficiency in training even after costs are considered. The KISCO DNC S/W for above system includes various communication function, communication parameter setting, program editor, tool management and user-friendly environment.