• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.794-801
• /
• 2017

When a radial wheel is placed so as to partially overlap a conductive plate and rotated, a lift force is generated on the wheel, a thrust force along the edge, and a lateral force which tends to reduce the overlap region. When several of these wheels are combined, it is possible to realize a system in which the stability of the remaining axes is ensured, except in the traveling direction. To validate the overall characteristics of the multi-wheel system, we propose a transfer system levitated magnetically using radial electrodynamic wheels. The proposed system is floated and propelled by four wheels and arranged in a structure that allows the thrusts generated by the front and rear wheels to offset each other. The dynamic stability of the wheel and the effect of the pole number on the three-axial forces are analyzed by the finite element method. At this time, the thrust and levitation force are strongly coupled, and the only factor affecting them is the wheel rotation speed. Therefore, in order to control these two forces independently, we make use of the fact that the ratio of the thrust to the levitation force is proportional to the velocity and is independent of the size of the gap. The in-plane and out-of-plane motion control of the system is achieved by this control method and compared with the simulation results. The experimental results show that the coupled degrees of freedom can be effectively controlled by the wheel speed alone.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.481-489
• /
• 2017

The study area,Cheonan Stream, is an urban river that flows through urban areas in close proximity to densely populated areas and multi-use facilities. The natural river improvement project from 2006 to 2015 improved the quality of life of local residents with the improvement of river function, the restoration of the natural ecosystem and the securement of hydrophilic space. A bike way in the constructed waterside space was built focusing on trails. This study suggests improvements appropriate for insufficient bike way function-related regulations. The problems of ramps, river crossing facilities, stairway facilities, safety facilities, signs, road markings, and parking facilities, etc.have arisen in the utilization situation and citizen consciousness survey. As an improvement, it was suggested that 12% or fewer ramps should be improved, a submerged bridge should be installed at 7 places separated by stepping bridges, and signs and road markings according to bike way-related regulations should be installed and bike parking facilities at Cheonan station and Cheonan bus terminal should be expanded. The bike way in the waterfront of ChoenanCheon(river) will increase the accessibility and utilization rate of short-distance transportation with the institutional expansion of bike use facilities and work organizations and the improvement of facilities in accordance with urban rivers and bike-related regulations. Therefore, it is expected that the development of the living space will be beneficial for the citizens due to the elimination of traffic in the city and the activation of bike traffic.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.134-143
• /
• 2017

In the case of highway, there may be a large number of travel time groups when there are a bus exclusive lane, a rest area, a sleeping shelter, etc. in the corresponding section. In most of the conventional travel time estimation studies, one representative travel time (assuming normal distribution) group is assumed in the low sample collection state, and if it is out of the specified range, it is determined as outliers and then the travel time is estimated. However, if there is a bus exclusive lane, a rest area, or a sleeping shelter in the relevant section, such as the highway, the distribution of travel time will be in the form of a bi-modal or a multi-modal, rather than a regular distribution. Therefore, applying the existing estimation methodology may result in distorted results. To solve this problem, first, it should be reliable even in the case of insufficient number of samples. Second, we propose a methodology to select the representative time group among a number of time groups and to estimate the representative time using individual time data of the selected time group.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.36-41
• /
• 2017

The mobile mapping system first introduced at Ohio State University in 1991 is being developed in various forms as sensor technology develops. The mobile mapping system can acquire geospatial information around amoving object quickly using the information gathered using the position and attitude information of the moving object and the data from various sensors. The mobile mapping system can rapidly acquire large amounts of Geospatial information and MMS provides maximum productivity in the same measurement methods as existing GNSS and total stations. Currently, a variety of systems are being launched, mainly by foreign companies, and they are applied to the construction of geospatial information. On the other hand, the application of domestic technology development or production is insufficient. This paper provides basic data for the introduction of a mobile mapping system to geospatial information related business by conducting the status survey and feature analysis of a commercialized system focusing on the ground-based mobile mapping system. The research identified the current status and characteristics of high-priced, low-priced, indoor, and handheld mobile mapping systems based on vehicles and suggest that the recent system development trends are moving toward lowering the unit prices. The mobile mapping system is currently being developed as a platform for the application of geospatial information construction and the launch of low-cost models. The development of data processing technologies, such as automatic matching and the launch of low-cost models, are forming a basis for the application of mobile mapping systems in the field of geospatial information construction.

• Journal of Korea Water Resources Association
• /
• v.46 no.3
• /
• pp.277-285
• /
• 2013

The purpose of this research is to evaluate the scenic value of the Gyungin Ara waterway in real estate prices. Apart from the multi-functionality such as transportation of passengers and freight, prevention of floods, and provision of leisure areas, the Ara waterway possesses a scenic function which offers people esthetic value through unique and beautiful scenery. This scenic function is an externality for apartment residents living nearby. The applied methodology for this research is the Hedonic Price Model (HPM) which creates a cause and effect model between real estate prices and attributes. Variables such as apartment sale prices, complex characteristics, location characteristics, timely characteristics have been deduced through data collected from a total of 4,207 households that have experienced actual transactions during the same period, all located within the scenic benefit boundaries of the waterway. Landscape variable has been derived from algorithm designed by a combination of digital map and Google Mapview. The scenic value of the waterway estimated through the application of HPM on these variables is 165,000 Won per area (pyeong). The regional asset enhancing effect caused by the landscape view of the waterway is estimated to be 89.1 billion won.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.132-147
• /
• 2008

So far ubiquitous service (u-service) priority has seldom been empirically examined based on the customer's view. It is usual to prioritize the relative importance of u-service variables by the supplier's intuition and a few specialist's experienced knowledge. Such approaches have the disadvantage that they provide only limited empirical information on the field practices in relation to u-service since customer demand of u-service is poorly defined despite abundant interest in this problem. Therefore, the aim of this research was to develop u-service priority model in the context of multi-criteria framework integrating customer and supplier's view, using high technology acceptance theory as major controlling factors. An important question was how to measure or represent criteria that is important to u-service and should be included in a priority model. The selection criteria for the model variables were derived from high technology acceptance theory and AHP approach through the analysis of frequency count, elimination of overlapping factors and brainstorming with specialists. Daegu showed top-rankings in transportation-aid service, guidance service for the eyesight disabled and u-telematics service. In contrast, disaster prevention service and industrial specialized town service ranked highly in the typical supplier's approach were not a dominant determining factor in the u-service priority. The model identified the fact that typical high priority service in terms of supplier's view did not necessarily accompany the important predictor for the u-service priority.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.161-170
• /
• 1998

기존에 건설된 교통시설의 운영효율을 극대화하기 위한 지능형 교통체계의 한 분야인 ATIS는 도로를 이용하는 통행자에게 편리성을 제공하는 동시에 도로를 효율적으로 운영할 수 있는 정보체계이다. ATIS 체계하에서 통행자에게 신뢰성 있는 정보를 제공하기 위해서는 교차로서의 회전에 의한 지체를 정확하게 반영함은 물론이고 실시간으로 변화하는 교통상황을 반영할 수 있는 동적인 최단경로 탐색 알고리즘이 요구된다. 하지만 기존에 발표된 동적인 최단경로 탐색 알고리즘은 회전에 대한 정보를 반영하지 못하며 정적인 최단경로 탐색 알고리즘은 회전에 대한 정보를 반영하지 못하며 정적인 탐색알고리즘 조차 회전에 대한 정보를 정확히 반영하지 못한다. 본 연구에서는 이러한 이유에서 알고리즘 내부에서 회전을 반영하기 위해 수정형 덩굴망 알고리즘의 표지기법을 이용하여 동적인 최단경로 탐색알고리즘을 개발하였다. 본 연구에서 개발한 동적 최단경로 탐색 알고리즘은 정적인 상태의 수정형 덩굴망 알고리즘에 시간에 따라 변화하는 교통상황을 반영하기 위해 시간에 대한 변수를 추가하였다. 이렇게 해서 알고리즘은 시간대별로 변화하는 통행시간을 고려하여 최단 경로를 탐색하게 되며 출발시점을 기준으로 표지를 설정하여 모든 앞선 시간에 대해 경로를 고려하도록 하였다. 매 단계에서 전 노드를 추적하여 회전에 관한 정보를 반영하도록 하였다. 따라서 본 연구에서 개발한 최단경로 탐색 알고리즘은 교차로에서의 회전에 대한 정보와 통행금지 등을 정확히 반영하며 실시간으로 변화하는 통행시간을 반영함으로써 신뢰성 있는 노선 정보를 ATIS를 이용하는 통행자들에게 제공하는데 활용될 수 있는 기법이다.적으로 세부적 차종분류로 접근한다.의 영향들을 고려함으로써 가로망 설계 과정에서 가로망의 상반된 역할인 이동성과 접근성의 비교가 가능한 보다 현실적인 가로망 설계 모형을 구축하고자 한다. 지금까지 소개된 가로망 설계모형들은 용량변화에 대한 설계변수의 형태에 따라 이산적 가로망 설계 모형과 연속적 가로망 설계모형으로 나뉘어지게 된다. 본 논문의 경우, 계산속도의 향상 측면에서는 연속적 가로망 설계 모형을 도입할 수 있지만, 이때 요구되는 도로용량이 이산적인 변수(차선 수)로 결정되어야만 신호제어 변수를 결정할 수 있기 때문에, 이산적 가로망 설계 모형이 사용된다. 하지만, 이산적 설계모형의 경우 조합최적화 문제이므로 정확한 최적해를 구하기 위해서는 상당한 시간이 소요되며, 경우에 따라서는 국부 최적해에 빠지게 된다. 이러한 문제를 극복하기 위해, 우선 이상적 모형의 근사화, 혹은 조합최적화문제를 위해 개발된 Simulated Annealing기법의 적용, 연속적 모형의 변수를 이산화하는 방법 등 다양한 모형들을 고려해 본 뒤, 적절한 모형을 적용할 것이다. 가로망 설계 모형에서 신호제어를 고려하기 위해서는 주어진 가로망에 대한 통행 배정과정에서 고려되는 통행시간을 링크통행시간과 교차로 지체시간을 동시에 고려해야 하는데, 이러한 문제의 해결을 위해서 최근 활발히 논의되고 있는 교차로에서의 신호제어에 대응하는 통행배정 모형을 도입하여 고려하고자 한다. 이를 위해서 지금까지 연구되어온 Global Solution Approach와 Iterative Approach를 비교, 검토한 뒤 모형에 보다 알맞은 방법을 선택한다. 차량의 교차로 통행을 고려하는 perf

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.113-121
• /
• 2015

Remote sensing technology using a multi-spectral satellite imagery can be utilized for the analysis of urban heat island effect in large area. However, weather condition of Korea mostly has a lot of clouds and it makes periodical observation using time-series of satellite images difficult. For this reason, we proposed the analysis of urban heat island effect using time-series of Landsat TM images and ATC model. To analyze vegetation condition and urbanization, NDVI and NDBI were calculated from Landsat images. In addition, land surface temperature was calculated from thermal infrared images to estimate the parameters of ATC model. Furthermore, the parameters of ATC model were compared based on the land cover map created by Korean Ministry of Environment to analyze urban heat island effect relating to the pattern of land use and land cover. As a result of a correlation analysis between calculated spectral indices and parameters of ATC model, MAST had high correlation with NDVI and NDBI (-0.76 and 0.69, respectively) and YAST also had correlation with NDVI and NDBI (-0.53 and 0.42, respectively). By comparing the parameters of ATC model based on land cover map, urban area had higher MAST and YAST than agricultural land and grassland. In particular, residential areas, industrial areas, commercial areas and transportation facilities showed higher MAST than cultural facilities and public facilities. Moreover, residential areas, industrial areas and commercial areas had higher YAST than the other urban areas.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.617-628
• /
• 2016

This paper proposes the structure of a smart transformer to improve the performance of the 60Hz main power transformer for rolling stock. The proposed smart transformer is a kind of solid state transformer that consists of semiconductor switching devices and high frequency transformers. This smart transformer would have smaller size than the conventional 60Hz main transformer for rolling stock, making it possible to operate AC electrified track efficiently by power factor control. The proposed structure employs a cascade H-Bridge converter to interface with the high voltage AC single phase grid as the rectifier part. Each H-Bridge converter in the rectifier part is connected by a Dual-Active-Bridge (DAB) converter to generate an isolated low voltage DC output source of the system. Because the AC voltage in the train system is a kind of medium voltage, the number of the modules would be several tens. To control the entire smart transformer, the inner DC voltage of the modules, the AC input current, and the output DC voltage must be controlled instantaneously. In this paper, a control algorithm to operate the proposed structure is suggested and confirmed through computer simulation.

• Korean Journal of Environment and Ecology
• /
• v.25 no.4
• /
• pp.621-630
• /
• 2011

This research examines the push and pull factors of temple stay in Korean national parks. 152 participants of temple stay in Woljeongsa and Guryongsa in national parks in Gangwon-do area completed a survey to access their reasons for participating in temple stay(push factors) and to evaluate how well the visiting experience performed on a selected set of attributes(push factors). Demographics of respondents were similar to the visitor characteristics of Korean national parks. The result of factor analysis identified 6 push factor domains of 'self actualization', 'health enhancement', 'nature assimilation', 'relationship elevation', 'religious experience', and 'leisure experience'. 6 pull factor domains were 'recuperative quality', 'quality of a temple stay program', 'attributes of a temple', 'user convenience', 'tourism experience' and 'accessibility and transportation'. Satisfaction level of temple stay in a national park was very high of 4.71 in a 5 Likert scale. Gangwon- Do was most preferred with the percentage of 89.2 as a suitable area for temple stay in a national park. Findings of multi-dimensional tourism motivations of temple stay in a national park that encompass nature tourism, cultural tourism and religious tourism is expected to provide useful information for the future development of a more competitive temple stay program and a marketing strategy. However, more defined successive research work is required to generalize findings of wellness oriented push and pull factors of temple stay based on nature in national parks.