• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.693-694
• /
• 2009

• Perspectives in Nursing Science
• /
• 제11권2호
• /
• pp.101-108
• /
• 2014

Purpose: The purpose of this study was to compare parenting stress between married migrant women and Korean women. Methods: Subjects were 68 married migrant women and 70 Korean women raising children aged seven years or younger, living in three different cities in Gangwon Do. To measure parenting stress, we used Kim's (1997) questionnaire that had been modified from Richard & Abidin's (1990) Parenting Stress Index (PSI). Results: There were significant differences between the two groups in age, academic credentials, job, monthly income, and achievement of maternal role. No statistically significant differences were found for parenting stress scores (p<.355), but there was a significant difference in the child characteristics of parenting stress (p<.007) between the two groups. There were no differences in the demographic variables influencing parenting stress between the two groups. Conclusion: The development of multi-cultural parenting and family support programs should consider the nationality and marital satisfaction of the family.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.135-141
• /
• 2003

MEMS structures generally have been fabricated using surface-machining method, but the interface failure between silicon substrate and evaporated thin film frequently takes place due to the residual stress inducing by the applied the various loads. And the very important physical property in the heated environment is the linear coefficient of thermal expansion. Therefore this paper studied the residual stress caused the thermal loads in the thin film and introduced the simple method to measure the trend of the residual stress by the indentation. Specimens were made of materials such as Al, Au and Cu and thermal load was applied repeatedly. The residual stress was measured by nano-indentation using AFM and FEA. The existence of the residual stress due to thermal load was verified by the experimental results. The indentation length of the thermal loaded specimens increased minimum 11.8％ comparing with the virgin thin film caused by tensile residual stress. The finite element analysis results are similar to indentation test.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권6호
• /
• pp.50-59
• /
• 2014

본 논문에서는 경북 구미시 봉곡천에 최근 건설된 다기능어도를 대상으로 SAP2000으로 구조 해석하기 위한 변수를 R/C Slab, R/C+S/C Slab 및 지하이동통로 규격(가로${\times}$세로)을 $1m{\times}0.2m$, $1m{\times}0.4m$, $1m{\times}0.6m$와 유속 0.8m/s, 1.2m/s, 1.6m/s으로 구분하여 해석한 결과와 봉곡천 설계식을 비교하여 안정성을 검토하였다. 봉곡천의 설계식 보다 R/C+S/C Slab 타입이 지하이동통로 출구부는 휨모멘트와 최대응력은 각각 28~54%, 26~50%, 측벽은 24~47%, 17~31%, 상부슬래브인 경우도 10~27%, 4~20% 적게 나타났다. 따라서 최대응력과 휨모멘트가 R/C+S/C Slab 타입이 구조 안정성이 확보되는 것으로 나타났기 때문에 지하통로는 휨모멘트와 최대 응력이 27%, 25%, 측벽은 24%, 15% 상부슬래브는 14%, 10%의 보완이 요구되는 것으로 판단된다. 이러한 결과는 지하이동통로 규격이 봉곡천 규격과 동일한 $1m{\times}0.4m$일 때가 $1m{\times}0.2m$, $1m{\times}0.6m$ 보다 안정성이 가장 유리한 것으로 확인되었다. 또한 해석 및 분석 결과를 근거로 다기능어도 시공 시 기본 자료로 활용이 기대된다.

• 한국강구조학회 논문집
• /
• 제12권5호통권48호
• /
• pp.503-513
• /
• 2000

본 연구에서는 구조물의 최적설계문제를 다를 때 나타나는 퍼지성을 고려하는 동시에 대립되는 기준들을 다루기 위해 중요도를 적용 유전자알고리즘 및 퍼지이론에 의한 이산형의 다목적 함수를 갖는 트러스구조물의 최적화를 시도하는 다목적 이산화 최적화 프로그램을 개발하였다. 그리고 개발된 프로그램을 적용하여 10부재철골트러스에 대한 설계 예를 들어 비교 고찰하였다. 본 연구를 통해 평면트러스구조물에대한 응력해석 및 최적설계가 일률적으로 처리될 수 있는 통합 시스템화된 퍼지-유전자알고리즘에 의한 다목적최적 구조설계가 가능하게 되었다. 특히 일반최적설계에서 처리되지 않는 불확실한 제약조건에 대한 경우에 대하여도 피지이론을 도입함으로써 가능하게 되어 보다 구조물의 합리적인 최적설계가 가능하게 되었다.

• 한국지반공학회지:지반
• /
• 제6권4호
• /
• pp.19-32
• /
• 1990

일반적으로 지반은 복잡하고 다양한 다층구조로 되어있다. 이러한 다층토 지반을 해석 하기 위 해 본문은 지반의 구성식,층의 구조와 두께, 각층의 강성, 재하조건 등을 변화시켜 수치해석 하였다. 기존의 다층토 지반은 Burmister의 2층계이론인 탄성해로 지중응력분포를 해석하였으나,여기서는 Biot방정식을 지배방정식으로하여 개발된 지반해석프로그램에 탄 .점소성구성식을 이용하여 층의 조건에 관계없이 2층이상의 모든 다층토지반의 지중응력분포를 해석 하고자 한다. 이들의 결과를 Burmister나 Fok의 결과와 비교하였으며, 서로 근접한 결과를 얻었다. 따라서, 본 연구는 다양한 다층토 지반을 전산 프로그램을 이용하여 실제에 가까운 응력전달기구 를 밝히려는 목적으로 수행된 것이다.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.300-307
• /
• 2002

Partial penetration welding joint is defined as groove welds welded from one side, without steel backing or groove welds welded from both sides but without back gouging. So it has an unwelded portion at the root of the weld. Study of partial penetration weldment fracture behavior includes residual stress analysis and fracture analysis. The J-integral loses its path independency in residual stress field. Therefore, it is necessary to introduce a new J-integral, J, which is defined including the effect of plastic deformation and thermal strain. In this study, theoretical formulation and program were developed for the evaluation of J-integral for the crack tip located in the weldment. Evaluations of fracture behavior were performed for partial penetration multi-pass weldment of 25.4mm thick plate by J-integral. From a point of fracture in partial penetration multi-pass welding, it seemed to be better to control root face smaller than 6.35mm.

• 대한기계학회논문집B
• /
• 제31권12호
• /
• pp.1033-1041
• /
• 2007

This paper studied the characteristics of performance and temperature in a unit cell of a planar type SOFC under various conditions by employing computational fluid dynamics (CFD). In order to derive thermal stress distribution and performance characteristics, the 3-D model simulation for a single channel was performed in various conditions which include interconnect materials $(LaCrO_3/AISI430)$, gas flow direction (co-flow/counter-flow) and inlet temperature (923 K/1173 K). From these results of a single channel, the most effective conditions were applied to the unit stack with multi-channel and the temperature distribution is displayed. Considering both thermal stress and performance, the best combination is 923 K inlet temperature, counter-flow and interconnector of stainless steel. As the end results, flow, thermal and current density distributions were found in the model with multi-channel applied to the best combination and were concentrated in the middle of channels than in the edge.

• Structural Engineering and Mechanics
• /
• 제55권5호
• /
• pp.953-964
• /
• 2015

A model has been proposed that can predict the ultimate torsional strength of single-box multi-cell reinforced concrete box girder under combined loading of bending, shear and torsion. Compared with the single-cell box girder, this model takes the influence of inner webs on the distribution of shear flow into account. According to the softening truss theory and thin walled tube theory, a failure criterion is presented and a ultimate torsional strength calculating procedure is established for single-box multi-cell reinforced concrete box girder under combined actions, which considers the effect of tensile stress among the concrete cracks, Mohr stress compatibility and the softened constitutive law of concrete. In this paper the computer program is also compiled to speed up the calculation. The model has been validated by comparing the predicted and experimental members loaded under torsion combined with different ratios of bending and shear. The theoretical torsional strength was in good agreement with the experimental results.

• 한국산업융합학회 논문집
• /
• 제11권2호
• /
• pp.59-64
• /
• 2008

Elements of a mechanical structure are getting from multi-axles stress. so fatigue characteristic experiment Shall execute in multi-axles stress state. it is very hard to apply according to forms of a testing machine and implementation. In this study, 2 axles fatigue testing machine did a design and Development. a new JIG developed to realize a mixed mode. a stress state in mixed mode of a specimen had each other comparison using the Finite element method to examine propriety of a new JIG.