Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Fracture Analysis of Thick Plate for Partial Penetration Multi-pass Weldment Using J-integral

J-적분을 이용한 후판 부분용입 다층용접재의 파괴 해석

  • Published : 2002.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Partial penetration welding joint is defined as groove welds welded from one side, without steel backing or groove welds welded from both sides but without back gouging. So it has an unwelded portion at the root of the weld. Study of partial penetration weldment fracture behavior includes residual stress analysis and fracture analysis. The J-integral loses its path independency in residual stress field. Therefore, it is necessary to introduce a new J-integral, J, which is defined including the effect of plastic deformation and thermal strain. In this study, theoretical formulation and program were developed for the evaluation of J-integral for the crack tip located in the weldment. Evaluations of fracture behavior were performed for partial penetration multi-pass weldment of 25.4mm thick plate by J-integral. From a point of fracture in partial penetration multi-pass welding, it seemed to be better to control root face smaller than 6.35mm.

Keywords

References

  1. AWS D1.1 Structural welding code
  2. Anderson, T. L., 1995, 'Fracture Mechanics, Fundamentals and Applicatons,' 2nd edition, CRC Press
  3. Rice, J. R., 1968, 'A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Crack,' Journal of Applied Mechanics, Vol. 35, pp. 379-386 https://doi.org/10.1115/1.3601206
  4. Wilson, W. K. and Yu, I., 1979, 'The Use of the J-integral in Thermal Stress Crack Problem,' International Journal of Fracture, Vol. 15, No. 4, pp. 379-387 https://doi.org/10.1007/BF00033062
  5. Blackburn, W. S., Jackson, A. D. and Hellen, T. K., 1977, 'An Integral Associated with the State of a Crack Tip in a Non-elastic Material,' International Journal of Fracture, Vol. 13, No. 2, pp. 183-200 https://doi.org/10.1007/BF00042559
  6. Kishimoto, K., Aoki, S., and Sakata, M., 1980, 'On the Path Independent Integral-J,' Engineering Facture Mechanics, Vol. 13, pp. 841-850 https://doi.org/10.1016/0013-7944(80)90015-6
  7. Aoki, S., Kishimoto, K., and Sakata, M., 1982, 'Elastic-plastic Analysis of Crack in Thermally Loaded Structures,' Engineering Fracture Mechanics, Vol. 16, No. 3, pp. 405-413 https://doi.org/10.1016/0013-7944(82)90118-7
  8. Wilson, W. K. and Yu, I. W., 1979, 'The Use of the J-integral in Thermal Stress Crack Problems,' International Journal of Fracture, Vol. 15, No. 4, pp. 377-387 https://doi.org/10.1007/BF00033062
  9. Shim, Y. L., 1997, 'Residual Stress, Distortion, and Fracture Analysis of Welded Structures using Finite Element Method,' Journal of KWS, Vo.. 15, No. 2, Feb., pp. 15-25
  10. ABAQUS User's Manual, HKS inc., 2000
  11. Kumar, V., Schumacher, B. I. and German, M. D., 1984, 'Development of a Procedure for Incorporating Secondary Stresses in the Engineerign Approach,' EPRI Report, No. EPRI NP-3607, Section 7
  12. 심용래, 이성근, '용접 잔류응력 해석을 위한 Heat Input Model 개발,' 1993, Jornal of KWS, Vol. 11, No. 3, Sep., pp. 110-122
  13. 김석, 배성인, 송정일, 2001, '부분용입 다층 용접에 관한 후판의 잔류응력 및 변형해석,' 대한기계학회 재료 및 파괴부문 1차 학술대회 논문집, pp. 211-216
  14. 김석, 배성인, 송정일, 2001, '후판의 부분용입 다층용접에 대한 잔류응력 및 변형해석,' 대한기계학회논문집 제25권 제11호, pp. 1813-1819