• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2006

The ignition delay of a dual fuel system has been numerically investigated by adopting a constant volume chamber as a model problem simulating diesel engine relevant conditions. A detailed chemical kinetic mechanism, consisting of 28 species and 135 elementary reactions, of dimethyl ether (DME) with methane ($CH_{4}$) sub-mechanism has been used in conjunction with the multi-dimensional reactive flow KIVA-3V code to simulate the autoignition process. The start of ignition was defined as the moment when the maximum temperature in the combustion vessel reached to 1900 K with which a best agreement with existing experiment was achieved. Ignition delays of liquid DME injected into air at various high pressures and temperatures compared well with the existing experimental results in a combustion bomb. When a small quantity of liquid DME was injected into premixtures of $CH_{4}$/air, the ignition delay times of the dual fuel system are longer than that observed with DME only, especially at higher initial temperatures. The variation in the ignition delay between DME only and dual fuel case tend to be constant for lower initial temperatures. It was also found that the predicted values of the ignition delay in dual fuel operation are dependent on the concentration of the gaseous $CH_{4}$ in the chamber charge and less dependent on the injected mass of DME. Temperature and equivalence ratio contours of the combustion process showed that the ignition commonly starts in the boundary at which near stoichiometric mixtures could exists. Parametric studies are also conducted to show the effect of additive such as hydrogen peroxide in the ignition delay. Apart from accurate predictions of ignition delay, the coupling between multi-dimensional flow and multi-step chemistry is essential to reveal detailed features of the ignition process.

• The KIPS Transactions:PartC
• /
• v.15C no.2
• /
• pp.93-102
• /
• 2008

The network weather map and bandwidth time-series graph are popularly used to understand the current and past traffic condition of NSP, ISP, and enterprise networks. These systems collect traffic performance data from a SNMP agent running on the network devices such as routers and switches, store the gathered information into a DB, and display the network performance status in the form of a time-series graph or a network weather map using Web user interface. Most of current enterprise networks are constructed in the form of a hierarchical tree-like structure with multi-Gbps Ethernet links, which is quietly different from the national or world-wide backbone network structure. This paper focuses on the network weather map for current enterprise network. We start with the considering points in developing a network weather map system suitable for enterprise network. Based on these considerings, this paper proposes the best way of using SNMP in constructing a network weather map system. To prove our idea, we designed and developed a network weather map system for our campus network, which is also described in detail.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1279-1288
• /
• 2007

A vehicle routing problem with time constraint is one of the must important problem in distribution and logistics. In practice, the service for a customer must start and finish within a given delivery time. This study is concerned about the development of a model to optimize vehicle routing problem under the multi-logistics center problem. And we used a two-step approach with an improved genetic algorithm. In step one, a sector clustering model is developed by transfer the multi-logistics center problem to a single logistics center problem which is more easy to be solved. In step two, we developed a GA-TSP model with an improved genetic algorithm which can search a optimize vehicle routing with given time constraints. As a result, we developed a Network VRP computer programs according to the proposed solution VRP used ActiveX and distributed object technology.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.447-454
• /
• 2017

Human desires start from the factors that make up the basic living environment. The development model of the safety guidelines will start from a sense of departure from collective psychology and systemic environment, at the time of inducing threats to threats. The design and methodology of the safety guidelines should be drawn up repeatedly by the sequence of iterative models, and the design methodology should be designed in the chronological order of the public services through the methodology of service design methodology. Various and complex threats attempt to derive insights from the user's perspective and to derive insight into the development of the safety guidelines and the sophistication of the user experience, and to extract insights from the perspective of a user's perspective and supervision model. This derived insight can be implemented as a multi-dimensional service model derived from the same problem consciousness methodology.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.509-516
• /
• 2015

Intangibility, measurement difficulty and irreversibility, which are the characteristics of service, have such problems as obscurity and uncertainty in quality evaluation. Technical entrepreneurship education, a sort of public service, also contains such characteristics of service. To objectively evaluate the service quality of technical entrepreneurship education, this paper drew up factors as hierarchical structure, centered on FAHP technique, and conducted pre-processing, inputted those factors into triangular fuzzy number fuzzy judgement matrix, and calculated their weights. In this manner, this paper proposed a TESE system, through which an analysis can be conducted by drawing relative importance and priorities of the factors. The proposed system can efficiently evaluate the qualitative technical start-up education service quality factors quantitatively in the diversely changing technical start-up environment in view of the highest result quality (41%), which means performance in the relative importance of major factors. Namely, this paper confirmed that clear decision making can be made through an experiment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.104-104
• /
• 2015

Due to the demand of the cold neutron flux in the neutron science and beam utilization technology, the cold neutron source (CNS) has been constructed and operating in the nuclear research reactor all over the world. The majority of the heat load removal scheme in the CNS is two-phase thermosiphon using the liquid hydrogen as a moderator. The CNS moderates thermal neutrons through a cryogenic moderator, liquid hydrogen, into cold neutrons with the generation of the nuclear heat load. The liquid hydrogen in a moderator cell is evaporated for the removal of the generated heat load from the neutron moderation and flows upward into a heat exchanger, where the hydrogen gas is liquefied by the cryogenic helium gas supplied from a helium refrigeration system. The liquefied hydrogen flows down to the moderator cell. To keep the required liquid hydrogen stable in the moderator cell, the CNS consists of an in-pool assembly (IPA) connected with the hydrogen system to handle the required hydrogen gas, the vacuum system to create the thermal insulation, and the helium refrigeration system to provide the cooling capacity. If one of systems is running out of order, the operating research reactor shall be tripped because the integrity of the CNS-IPA is not secured under the full power operation of the reactor. To prevent unscheduled reactor shutdown during a long time because the research reactor has been operating with the multi-purposes, the introduction of the standby cooling system (STS) can be a solution. In this presentation, the design considerations are considered how to design the STS satisfied with the following objectives: (a) to keep the moderator cell less than 350 K during the full power operation of the reactor under loss of the vacuum, loss of the cooling power, loss of common electrical power, or loss of instrument air cases; (b) to circulate smoothly helium gas in the STS circulation loop; (c) to re-start-up the reactor within 1 hour after its trip to avoid the Xenon build-up because more than certain concentration of Xenon makes that the reactor cannot start-up again; (d) to minimize the possibility of the hydrogen-oxygen reaction in the hydrogen boundary.

• Journal of Power System Engineering
• /
• v.13 no.6
• /
• pp.13-21
• /
• 2009

This basic study is required to examine spray or jet behavior depending on fuel phase. In this study, analyses of diesel fuel(n-Tridecane, $C_{13}H_{28}$) spray and natural gas fuel(Methane, $CH_4$) jet under high temperature and pressure are performed by a general-purpose program, ANSYS CFX release 11.0, and the results of these are compared with experimental results of diesel fuel spray using the exciplex fluorescence method. The simulation results of diesel spray is analyzed by using the combination of Large-Eddy Simulation(LES) and Lagrangian Particle Tracking(LPT) and of a natural gas jet is analyzed by using Multi-Component Model(MCM). There are two study variables considered, that is, ambient pressure and injection pressure. In a macroscopic analysis, the higher ambient pressure is, the shorter spray or jet tip penetration is at each time after start of injection. And the higher injection pressure is, the longer spray or jet tip penetration is at each time after start of injection. When liquid fuel is injected, droplets of the fuel need some time to evaporate. However, when natural gas fuel is injected, the fuel does not need time to evaporate. Gas fuel consists of minute particles. Therefore, the gas fuel is mixed with the ambient gas more quickly at the initial time of injection than the liquid fuel is done. The experimental results also validate the usefulness of this analysis.

• Journal of Internet of Things and Convergence
• /
• v.1 no.1
• /
• pp.1-4
• /
• 2015

This paper aims to present the mathematical model to find the mean web object transfer latency in the slow-start phase of TCP congestion control mechanism, which is one of the main control techniques of Internet. Mean latency is an important service quality measure of end-user in the network. The application area of the proposed latency model is the narrowband environment including multi-hop wireless network and Internet of Things(IoT), where packet loss occurs in the slow-start phase only due to small window. The model finds the latency considering initial window size and the packet loss rate. Our model shows that for a given packet loss rate, round trip time and initial window size mainly affect the mean web object transfer latency. The proposed model can be applied to estimate the mean response time that end user requires in the IoT service applications.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.6
• /
• pp.487-494
• /
• 2023

Objectives: Community organization is a resident-led movement aimed at creating fundamental social changes in the community by resolving its problems through the organized power of its residents. This study evaluated the effectiveness of health community organization (HCO), Gangwon's Health-Plus community program, implemented from 2013 to 2019 on residents' health behaviors. Methods: This study had a before-and-after design using 2011-2019 Korea Community Health Survey data. To compare the 3-year periods before and after HCO implementation, the study targeted areas where the HCO had been implemented for 4 years or longer. Therefore, a total of 4512 individuals from 11 areas with HCO start years from 2013 to 2016 were included. Complex sample multi-logistic regression analysis adjusting for demographic characteristics (sex, age, residential area, income level, education level, and HCO start year) was conducted. Results: HCO implementation was associated with decreased current smoking (adjusted odds ratio [aOR], 0.73; 95% confidence interval [CI], 0.57 to 0.95) and subjective stress recognition (aOR, 0.79; 95% CI, 0.64 to 0.97). Additionally, the HCO was associated with increased walking exercise practice (aOR, 1.39; 95% CI, 1.13 to 1.71), and attempts to control weight (aOR, 1.36; 95% CI, 1.12 to 1.64). No significant negative changes were observed in other health behavior variables. Conclusions: The HCO seems to have contributed to improving community health indicators. In the future, a follow-up study that analyzes only the effectiveness of the HCO through structured quasi-experimental studies will be needed.

• Animal Bioscience
• /
• v.35 no.7
• /
• pp.1059-1068
• /
• 2022

Objective: This study was conducted to evaluate the effect of using low energy diet with multi-enzymes supplementation on different biological parameters in broilers. Methods: Three hundred Arbor Acres broiler chicks were randomly divided into three groups (Cont, standard metabolizable energy(ME); L-ME, ME reduced by 50 kcal/kg without enzyme; and L-ME-MES, L-ME diet was supplemented with multi-enzymes) with five replicates per group (20 chicks per replicate) at the start of second week. Grower and finisher diets were formulated according to breed specific guide and offered with free access in respective phase (two weeks for grower [8 to 21 d]; two weeks for finisher [22 to 35 d]). External marker method was used to measure the nutrient digestibility. After feeding trial, fifteen birds (one bird per replicate) were selected randomly and slaughtered for samples collection. Results: The results exhibited no effect (p>0.05) of dietary treatments on all parameters of growth performance, carcass traits, relative weight of internal organs except bursa and overall parameters of thigh meat quality. Relative weight of bursa was significantly (p<0.05) higher in L-ME than control. Multi-enzymes supplementation in low-ME diet significantly (p<0.05) improved the breast meat pH 24 h, digestibility of crude protein, duodenum weight and length, jejunal morphology, counts of Lactobacillus spp. and Bifidobacterium spp., lipase and protease activities than control. Jejunum length was increased in both L-ME and L-ME-MES treatments than that of the control (p<0.05). Breast meat cooking loss and color lightness was lower in L-ME (p<0.05) than control. Conclusion: It can therefore be concluded that broilers could be reared on low energy diet with supplementation of multi-enzymes without compromising the growth performance. In addition, it is beneficial for other biological parameters of broilers.