• Imaging Science in Dentistry
• /
• 제40권1호
• /
• pp.15-23
• /
• 2010

Purpose : This study was designed to compare the effective doses from low-dose and standard-dose multi-detector CT (MDCT) scanning protocols and evaluate the image quality and the spatial resolution of the low-dose MDCT protocols for clinical use. Materials and Methods : 6-channel MDCT scanner (Siemens Medical System, Forschheim, Germany), was used for this study. Protocol of the standard-dose MDCT for the orthodontic analysis was 130 kV, 35 mAs, 1.25 mm slice width, 0.8 pitch. Those of the low-dose MDCT for orthodontic analysis and orthodontic surgery were 110 kV, 30 mAs, 1.25 mm slice width, 0.85 pitch and 110 kV, 45 mAs, 2.5 mm slice width, 0.85 pitch. Thermoluminescent dosimeters (TLDs) were placed at 31 sites throughout the levels of adult female ART head and neck phantom. Effective doses were calculated according to ICRP 1990 and 2007 recommendations. A formalin-fixed cadaver and AAPM CT performance phantom were scanned for the evaluation of subjective image quality and spatial resolution. Results : Effective doses in ${\mu}Sv$ ($E_{2007}$) were 699.1, 429.4 and 603.1 for standard-dose CT of orthodontic treatment, low-dose CT of orthodontic analysis, and low-dose CT of orthodontic surgery, respectively. The image quality from the low-dose protocol were not worse than those from the standard-dose protocol. The spatial resolutions of both standard-dose and low-dose CT images were acceptable. Conclusion : From the above results, it can be concluded that the low-dose MDCT protocol is preferable in obtaining CT images for orthodontic analysis and orthodontic surgery.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권1호
• /
• pp.36-42
• /
• 2007

A low-power compact driver for multistandard physical layer is presented. The proposed driver achieves low power and small area through the voltage-mode driver with trans-impedance configuration and the novel hybrid driver,. In the voltage-mode driver, a trans-impedance configuration alleviates the problem of limited common-mode range of error amplifiers and the area and power overhead due to pre-amplifier. For a standard with extended output swing, only current sources are added in parallel with the voltage-mode driver, which is named a 'hybrid driver'. The hybrid architecture not only increases output swing but reduces overall driver area. The overall driver occupies $0.14mm^2$. Power consumptions under 3.3-V supply are 24.5 mW for the voltage-mode driver and 44.5 mW for the hybrid driver.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.715-718
• /
• 2000

본 실험을 통하여 각 채널에서의 독성 농도에 따른 다양한 발광 패턴을 확보 할 수 있었으며 이를 바탕으로 본 시스템의 실제 현장 적용 시 나타나는 발광 패턴과 비교하여 독성을 분석하고 정성, 정량화 하는데 지표로 사용될 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.795-796
• /
• 2008

H.264/AVC standard adopts multiple reference frames for motion estimation. This method improves coding efficiency, but it increases complexity of encoder. In this paper, we propose a algorithm that reduces the search range by using the correlation of motion vector. Consequently, motion estimation processing time is 47.5% when compared with standard of five reference frames, and SNR and bitrate are better than that of standard of three multi reference frames.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.187-193
• /
• 1999

Dimensional difference by welding deformation is usually occurred at steel bridge manufacturting or multi-pass welding used at joining of thick plates. Be this, root gap out of standard is frequently developed at butt weld joints. For example, although standard root gap below 6mm at butt weld joints of plates under 15mm thickness, maximum 30mm root opening is developed at the weld field. At this case, 24mm parts out of standard is generally built up. But, there are no accumulated data and restriction about this built up welding pars. In this study, therefore, the accumulation of data for built up parts and the verification of the mechanical properties of weld part as root gap is performed. It is included that tensile, bending, impact, hardness test and microstructural review for each welding specimen of 0mm, 6mm, 30mm root opening.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.293-299
• /
• 2016

Recently, as IoT (Internet of Things) becomes more important, low cost implementation of sensor nodes also becomes critical issues for two well-known standards, IEEE 802.15.4 and IEEE 802.15.6 which stands for WPAN (Wireless Personal Area Network) and WBAN (Wireless Body Area Network), respectively. This paper presents the area-optimized AES-CCM (Advanced Encryption Standard - Counter with CBC-MAC) hardware security engine which can support both IEEE 802.15.4 and IEEE 802.15.6 standards. First, for the low cost design, we propose the 8-bit AES encryption core with the S-box that consists of fully combinational logic based on composite field arithmetic. We also exploit the toggle method to reduce the complexity of design further by reusing the AES core for performing two operation mode of AES-CCM. The implementation results show that the total gate count of proposed AES-CCM security engine can be reduced by up to 42.5% compared to the conventional design.

• 한국광학회지
• /
• 제20권6호
• /
• pp.354-360
• /
• 2009

공초점 현미경 중 하나로 각광받는 MMM(multi-focal multi-photon microscope)의 핵심부분인 미세렌즈 배열판을 광섬유 다발로 대체한 간단한 형태의 광섬유 다발 다초점 현미경을 구성하여 그 성능을 분석하였다. 이 현미경의 성능 분석을 위하여 세 종류의 시료를 사용하였으며, 두 개의 편광판과 편광 빔 분리기를 사용하여 노이즈를 제거한 뚜렷한 상을 얻을 수 있었다. 표준격자 시료를 사용하여 1차 대물렌즈의 배율을 63배와 20배로 달리하면서 광점 상의 FWHM를 구하였고, 광점 상들의 분포 속에서 물체의 상을 볼 수 있었으며, 분포가 조밀한 저배율의 1차 대물렌즈를 사용할 경우에 보다 선명한 시료의 상을 얻을 수 있었다. 광섬유 다발 다초점 현미경의 분해능을 시험하기 위해서 표준격자 시료보다 격자 간격이 작은 USAF 1951을 시료로 사용하여 상을 측정하여 얻은 시료 상의 FWHM와 주어진 시료의 선폭 값이 서로 잘 일치함을 볼 수 있었다. 광섬유 다발 다초점 현미경은 1개의 광섬유 다발을 사용함으로써 시스템을 간소화시켰고, 마이크론 이하의 분해능을 가지며, 광섬유의 개수인 1600개의 광점 상을 동시에 얻을 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1309-1312
• /
• 2005

A multi-chemical supply system is developed and applied to a wet station, which uses the multi-chemical process in one bath. To control the concentration of two chemicals, control logic of a supply pump is programmed using the programable logic controller (PLC). By using the multi-chemical supply system, wet station with single bath is applied to cleaning process using multi chemicals such as buffed oxide etchant (BOE) and standard clean 1 (SC-1). The concentration of each chemical is measured in the bath to verify the multi-chemical supply system. The control range in the each chemical concentration is measured to 1.33weight% in NH4OH and 0.23weight% in H2O2. The multi-chemical supply system can be movable and usable as an independent module of fixed wet station. By simply midifying the PLC, a multi-chemical supply system can be developed for a wet station.

• Animal Bioscience
• /
• 제35권10호
• /
• pp.1585-1591
• /
• 2022

Objective: The present study examined the effects of exogenous emulsifiers and multi-enzyme supplementation into a low energy density diet on growth performance, visceral organ parameters, blood metabolites, ileal morphology, and nutrient digestibility in broiler chickens from hatch to 21 days. Methods: One hundred and sixty-eight one-day-old Ross 308 broiler chickens were allocated in a completely randomized design to 24 pens and each pen was assigned to one of four dietary treatments to give six replications with seven chickens in a cage. Dietary treatments were: i) positive control with standard energy level (PC); ii) negative control with 100 kcal/kg lower energy of the standard level (NC); iii) NC diet supplemented 0.05% calcium stearoyl-2 lactylate as an emulsifier (NC+E); and iv) NC diet supplemented with both 0.05% calcium stearoyl-2 lactylate and 0.05% multi-enzyme (NC+E+M). Corn and soybean meal-based control diets containing vegetable oil were formulated to meet the Ross 308 nutrition specification. Chickens were fed ad-libitum with the treatment diets and sampling was conducted on day 21. Results: Our results revealed that emulsifier and multi-enzyme supplementation into NC diets improved (p<0.05) feed efficiency of the broiler chickens compared to the broiler chickens fed NC diets from hatch to 21 days. Supplementation of emulsifier and multi-enzyme into NC diet improved (p<0.05) nutrient digestibility of the broiler chickens. However, emulsifier and multi-enzyme supplementation into diet did not influence (p>0.05) visceral organ weight, blood metabolites, and intestinal morphology in broiler chickens fed NC diets. Conclusion: Supplementation of emulsifier and multi-enzyme in the NC diet would support improving growth performance in young broiler chickens with improved feed efficiency and increased nutrient digestibility thereby curtailing the negative impact of energy reduction in the diets.

• 한국항공운항학회지
• /
• 제18권2호
• /
• pp.41-45
• /
• 2010

It is often misled that Multi Pilot License is introduced by International Civil Aviation Organization for the shortage of pilots. The truth is, however, that the license is focused on efficient training of co-pilots in the airline transportation system which an autopilot system is increasing in the Multi Crew environment. ICAO has been researching on the license since 1982, and made it international standard on 2006. Currently, co-pilots trained under Multi-Crew Pilot License courses are continuously increasing over the world. Although the license has introduced to Korea in September 10, 2009, it has not won popular support yet. This paper will lead people to precise understanding of Multi-Crew Pilot License and suggest its introduction plan.