• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.400-401
• /
• 2014

• 항공우주시스템공학회지
• /
• 제11권1호
• /
• pp.41-46
• /
• 2017

소형 다중로터 드론의 동작 실험을 위하여 개발한 장치를 소개한다. 개발한 장치는, 볼 부슁 메카니즘, 이동형 지지대, 그리고 회전판을 적용하여 6자유도 운동이 가능하다. 병렬 처리가 가능한 FPGA기반의 제어기를 사용하여, 가속도와 자이로 센서로 부터 자세를 측정하고 모터 속도를 제어하였다. 다양한 동작을 수행하면서 실험 장치와 제어기의 동작성을 확인하였다. 결론적으로, 개발한 6자유도 실험 장치는 소형 드론 제어를 위한 제어기의 성능 검증을 위해 적합하다.

• 한국항공우주학회지
• /
• 제48권6호
• /
• pp.443-453
• /
• 2020

대표적인 기동 헬리콥터인 UH-60A의 기체 진동응답을 감소시키고자 능동 진동 제어 시스템(Active Vibration Control System, AVCS)을 이용한 시뮬레이션 연구를 수행하였다. 로터 진동 하중, 기체 구조 동역학 모델링, 진동응답 해석 및 진동 제어 시뮬레이션 연구를 수행하기 위하여 DYMORE II, NDARC, MSC.NASTRAN 및 MATLAB Simulink 등의 다양한 해석, 설계 및 제어 프로그램들을 함께 사용하였다. 5개의 CRFG와 7개의 가속도계로 이루어진 Multi Input Multi Output(MIMO) 모델을 AVCS 시뮬레이션 연구에 이용하였다. 본 시뮬레이션 연구를 통하여 진동이 극심한 158knots의 비행속도에서 UH-60A의 주요 위치(조종석, 로터와 기체의 접합부, 중앙 승객실 및 후방 승객실) 위치에서 AVCS의 사용으로 인하여 4/rev 기체 진동응답이 25.14~96.05%만큼 감소될 수 있었다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권4호
• /
• pp.466-472
• /
• 2013

The paper presents a novel DC grid connection topology and control strategy for doubly-fed induction generator (DFIG) based wind power generation system. In order to achieve the wind power conversion, the stator side converter and the rotor side converter is used to implement the DFIG control based on the indirect air-gap flux orientation, and a DC/DC converter is used for the DFIG system to DC grid connection. The maximum power point tracking and DC voltage droop control can also be implemented for the proposed DFIG system. Finally, a 4-terminal DFIG-based multi-terminal DC grid system is developed by Matlab to validate the availability of the proposed system and control strategy.

• 대한기계학회논문집A
• /
• 제32권3호
• /
• pp.232-239
• /
• 2008

The position sensors used in a magnetic bearing system are desirable to provide some degree of fault-tolerance as the rotor position is necessary for the feedback control to overcome the open-loop instability. In this paper, we propose an inductive position sensor that can cope with a partial fault in the sensor. The sensor has multiple poles which can be combined to sense the in-plane motion of the rotor. When a high-frequency voltage signal drives each pole of the sensor, the resulting current in the sensor coil contains information regarding the rotor position. The signal processing circuit of the sensor extracts this position information. In this paper, we used the magnetic circuit model of the sensor that shows the analytical relationship between the sensor output and the rotor motion. The multi-polar structure of the sensor makes it possible to introduce redundancy which can be exploited for fault-tolerant operation. The proposed sensor is applied to a magnetically levitated turbo-molecular vacuum pump. Experimental results validate the fault-tolerance algorithm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.297-303
• /
• 2001

This research presents an analytical model to characterize the ball bearing vibration due to the waviness in a rigid rotor supported by multi-row ball bearings considering centrifugal force and gyroscopic moment of ball. The effects of centrifugal force and gyroscopic moment are introduced to the kinematic constraints and force equilibrium equations. The waviness of ball and races is modeled by the superposition of sinusoidal function and it is introduced to position vectors of race curvature center to use the Hertzian contact theory in order to calculate the elastic deflection and nonlinear contact force resulting from the waviness while the rotor has translational and angular motion. They can be determined by solving the nonlinear equations of motion with five degrees of freedom by using the Runge-Kutta-Fehlberg algorithm. The accuracy of this research is validated by comparing with the results of the prior researches. It characterizes the vibration frequencies resulting from the various kinds of waviness in rolling elements, the harmonic frequencies resulting from the nonlinear load-deflection characteristics of ball bearing resulting from the waviness interaction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.233-237
• /
• 2014

In this paper, the finite element modeling of the RK4 rotor kit system (RK4) and then frequency analysis and transient analysis, and was compared with the actual experimental results. RK4 manufactured by General Electric for the purpose of education and research. It is composed of two shaft, Two shaft is connected using a flexible coupling, one disk is mounted. The analytical model is modeled by using the ANSYS finite element analysis program commercially available. Based on impact hammer test results, material properties and the stiffness of the bearing and coupling was tuned. Considering the operating conditions and the vibration response of the analytical model were compared with experimental results.

• KIEE International Transactions on Power Engineering
• /
• 제4A권3호
• /
• pp.134-140
• /
• 2004

This paper presents an improved group of energy functions reflecting generator damping effects for multi-machine power systems by using Center of Inertia (COI) formulation as an extension of the previous work. Since rotor angles at the Stable Equilibrium Point (SEP) of post-fault systems are generally calculated in COI, system transient energy can be found without assumption of infinite or slack bus, which is a crucial drawback of the absolute rotor angle frame approach. The developed energy functions have a structure preserving property with which it is very flexible to incorporate various models of power system components, especially various load and generator models. The proposed damping-reflected energy functions are applied to the Potential Energy Boundary Surface (PEBS) method, one of the direct methods. Numerical simulation of WSCC 9-bus shows that conservativeness of the PEBS method can be considerably reduced.

• 항공우주시스템공학회지
• /
• 제15권1호
• /
• pp.40-46
• /
• 2021

본 연구에서는 재난치안무인기 MC-1,2,3 대비 임무능력이 대폭 향상된 임무확장형 무인기 후보인 틸트로터 무인기의 공력형상설계와 성능향상을 위한 연구를 수행하였다. 기존 운영 중인 TR60 틸트로터 무인기의 형상을 근간으로 성능향상을 위하여 동체 및 꼬리날개 형상을 개선하고 나셀에 확장날개를 장착한 새로운 TR5X 개념형상을 설계하고 전산유체해석을 통해 기존 TR60과 공력성능을 비교하였다. 또한 TR5X 전기체 공력데이터를 구축하고 전기체 비행성능해석을 수행하여 목표로 설정된 주요 성능요구도가 만족됨을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제5권3호
• /
• pp.503-510
• /
• 2010

This paper proposes the use of fuzzy applications to a 4-machine and 10-bus system to check stability in open conditions. Fuzzy controllers and the excitation of a synchronous generator are added. Power system stabilizers (PSSs) are added to the excitation system to enhance damping during low frequency oscillations. A fuzzy logic power system stabilizer (PSS) for stability enhancement of a multi-machine power system is also presented. To attain stability enhancement, speed deviation ($\Delta\omega$) and acceleration ($\Delta\varpi$) of the Kota Thermal synchronous generator rotor are taken as inputs to the fuzzy logic controller. These variables have significant effects on the damping of generator shaft mechanical oscillations. The stabilizing signals are computed using fuzzy membership functions that are dependent on these variables. The performance of the fuzzy logic PSS is compared with the open power system, after which the simulations are tested under different operating conditions and changes in reference voltage. The simulation results are quite encouraging and satisfactory. Similarly, the system is tested for the different defuzzification methods, and based on the results, the centroid method elicits the best possible system response.