• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.443-451
• /
• 2020

In this study, the physico-chemical properties and pyrolysis kinetics of livestock mature solid fuel were investigated to know its feasibility as a fuel. Ultimate and proximate analysis results showed that livestock mature solid fuel has high contents of volatile matter (64.94%), carbon (44.35%), and hydrogen (5.54%). The low heating value of livestock mature solid fuel (3880 kcal/kg) was also higher than the standard requirement of solid fuel (3000 kcal/kg). Thermogravimetic analysis results indicated that livestock mature solid fuel has three decomposition temperature regions. The first temperature zone (130~330 ℃) was consisted with the vaporization of extracts and the decomposition of hemicellulose and cellulose. The second (330~480 ℃) and third (550~800 ℃) temperature regions were derived from the decomposition of lignin and additional decomposition of carbonaceous materials, respectively. The activation energy derived from model free kinetic analysis results including Friedman, Flynn-Wall-Ozawa (FWO), and Kissinger-Akahira-Sunose (KAS) methods for the pyrolysis of livestock mature solid fuel was in the range of 173.98 to 525.79 kJ/mol with a conversion rate of 0.1 to 0.9. In particular, the activation energy increased largely at the higher conversion than 0.6. The kinetic analysis using a curve-fitting method suggested that livestock mature solid fuel was decomposed via a multi-step reaction which can be divided into five decomposition steps.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.100-106
• /
• 2007

The objective of this study was to evaluate the efficiency of $(NH_4)_2HPO_4$, $Na_2HPO_4{\cdot}12H_2O$, $CaHPO_4{\cdot}2H_2O$, $Ca(H_2PO_4)_2{\cdot}H_2O$ and $H_3PO_4$ for the stabilization of soils contaminated with multi-metals containing Pb, Cd and As. The application rate of stabilizers to soils was determined based on $PO_4/Pb_{total}$ molar ratio of 0.5, 1, 2, 4. The results of Korea Standard Test and TCLP (EPA Method 1311) showed the reduction of metal leachabilities below the regulatory limits for Pb and Cd when $H_3PO_4$ and $Ca(H_2PO_4)_2{\cdot}H_2O$ were applied. However, stabilization efficiency for Cd was low and in case of As leaching concentration increased rather. It is considered that $PO_4$ reacted effectively $Pb^{2+}$ due to leaching Pb under low pH condition created by adding $H_3PO_4$. Accordingly Pb was stabilized by dissolution and precipitation of hydroxypyromorphite. From the change of metals fraction using sequential extraction procedure when $H_3PO_4$ applied as a stabilizer, we confirmed that residual fraction increased more than 60% and this result was accorded with XRD analysis that detected only hydroxypyromorphite peak in $H_3PO_4$.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.41-52
• /
• 2011

This study was carried out to investigate the effect of energy saving and sound insulation of building materials mixed with charcoal. To investigate the functionality of building based on the difference of construction materials, three different experimental buildings were constructed. They were buildings built with the conventional construction materials (A), the charcoal construction materials (B), and the charcoal-sericite construction materials (C). The study showed that energy consumption could be reduced approximately 9.5% and 14.5% by replacing A with B and C, respectively. Especially, it is revealed that the lower outdoor temperature was, the higher energy saving effect was. Also, after shutoff the boiler switch the decrease rate of room temperature of the one using B was lower than those of others using A and C so that the room temperature at the building using B was higher by $3.5{\sim}4.2^{\circ}C$ in the 1 meter air above the ground and by $4.4{\sim}5.4^{\circ}C$ on the floor surface after 12 hours passed. In the building noise test the heavy-and light-weight impact sound of the plate, represented by criterion of noise between floors in multi-story building, tended to decrease in the test sample containing charcoal.

• Journal of Chest Surgery
• /
• v.41 no.4
• /
• pp.463-468
• /
• 2008

Background: Descending necrotizing mediastinitis (DNM) is a life-threatening cervico-mediastinal infection extending from the oropharynx or periodontal space. We reviewed clinical outcomes of DNM patients that underwent surgical management. Material and Method: We analyzed the demographic and surgical data from 8 patients (6 males and 2 females) that underwent surgical management for DNM between August 2003 and August 2007. Result: The mean age was $56.6{\pm}12.3$ ($34{\sim}72$) years, Types of DNM were I (n=2), IIA (n=1), and IIB (n=5), based on the classification system of Endo et al. Four patients were septic at the time of operation. The infectious organism was identified in three cases and turned out to be Streptococcus. ICU stay was $24.3{\pm}17.9$ ($3{\sim}58$) days, and hospital stay was $49.1{\pm}33.8$ ($20{\sim}125$) days, There were two deaths (25%), both of which were due to multi-organ failure. Conclusion: Despite aggressive surgical drainage and appropriate medical management, DNM still had a high mortality rate, Early diagnosis and prompt surgical intervention are key to DNM management. In addition, transcervical drainage should be used in limited disease only.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.45-52
• /
• 2008

We investigated the design of an RF-powered, wireless temperature sensor tag chip using $0.18-{\mu}m$ CMOS technology. The transponder generates its own power supply from small incident RF signal using Schottky diodes in voltage multiplier. Ambient temperature is measured using a new low-power temperature-to-voltage converter, and an 8-bit single-slope ADC converts the measured voltage to digital data. ASK demodulator and digital control are combined to identify unique transponder (ID) sent by base station for multi-transponder applications. The measurement of the temperature sensor tag chip showed a resolution of $0.64^{\circ}C/LSB$ in the range from $20^{\circ}C$ to $100^{\circ}C$, which is suitable for environmental temperature monitoring. The chip size is $1.1{\times}0.34mm^2$, and operates at clock frequency of 100 kHz while consuming $64{\mu}W$ power. The temperature sensor required a -11 dBm RF input power, supported a conversion rate of 12.5 k-samples/sec, and a maximum error of $0.5^{\circ}C$.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.3
• /
• pp.101-116
• /
• 2004

Korea has the highest traffic accident occurrence rate in the world. It means that we are forced to face a tremendous amount of economic loses and great cost of life. Even though this phenomenon consistently has arose as a public issue every year and many researchers have emphasized the importance of safety education as the fundamental solution, we are still trying to make a long-lasting and effective traffic safety education programs for children and adolescents. The purpose of this study was to test the effectiveness of web-based learning for traffic safety in Korea middle school. For this purpose, the instructive model was constructed based on the ASSURE model and a special web-site of education was developed on behalf of practical use of multi-media learning materials for the traffic safety. The research subject was represented by 259 students from second grade in 2 middle schools located in Seoul Korea. The traffic safety education program using web-site was preceded to the 136 students as a case group for 45 minutes total 3 times. Other 126 students are control group those who did not get with this program. The survey was conducted before and after the education. The results of this study were as follow: 1. The knowledge analysis from the comparison between before and after of the lesson showed case group and control group scored average at 11.25 points and 10.97 points. However, after they attended programs, case group scored 13.57 points and control group scored 10.85 points. The difference from the result of the case group was statistically significant(p<0.001). 2. The attitude analysis from the comparison between before and after of the lesson showed case group and control group scored averages at 29.59 points and 28.21 points. However, after they attended program, case group scored 37.23 points and control group scored 32.71 points. The difference from the result of the case group was statistically significant(p<0.05). 3. Regarding the domain analysis by means of web-based traffic safety education, only the case group had a statistically significant score in the case of knowledge 'safe utilization of bicycle' and 'The Characteristic of Automobile and Safer Mode of Walking for Pedestrian'(p<0.01, p< 0.001), and in the case of attitude 'safe walking and crossing' 'The Characteristic of Automobile and Safer Mode of Walking for Pedestrian'(p<0.01, p<0.001). 4. Web based instruction for traffic safety was effective in terms of improving students' knowledge and attitude for traffic safety.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.175-179
• /
• 2018

The button mushroom 'A. bisporus' is the most commonly grown mushroom worldwide. The color of 'Agaricus bisporus' is white and brown. Recently, the consumption of brown button mushrooms has been increasing steadily. 'Danseok-1ho' was bred using the multi-spore random mating method and named after Danseok Mountain in Gyeongju, the region where 'A. bisporus' was first grown in Korea. The optimum temperature for mycelial growth was between $20^{\circ}C$ and $30^{\circ}C$, and the mushroom production temperature was between $15^{\circ}C$ and $20^{\circ}C$. The color and shape of 'Danseok-1ho' are medium brown and spherical, respectively. The width and thickness of the pileus are 45.1 mm and 23.5 mm, respectively. The hardness and L of chromaticity of 'Danseok-1ho' are $8,937g/{\Phi}5mm$ and 50.4, respectively. The incubation period is around 20 days and mushroom production takes about 18 days after casing. A typical characteristic of 'Danseok-1ho' is that the individual occurrence rate is high, so mushroom losses are low during harvest.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.137-143
• /
• 2020

To ensure safety of raw materials for military foods, hazard assessment and monitoring of residual pesticides was conducted on agricultural products consumed by 9 companies based in Gyeongin and Gangwon. Residual pesticides were analyzed for 142 different products, by applying the multi-species pesticide polycomponent analysis method. Of the 36 samples analyzed, residual pesticides were detected in 7 samples, representing a detection rate of 19.4%. One particular pesticide residue was detected in peanuts, green onions, and red pepper powder, and 20 types of pesticide residues were detected in red pepper powder used in combat foods. However, all residues were found to be below the permissible level. Moreover, the hazard assessment results for Cypermethrin, Tebuconazole and EPN showed the highest concentration among the residual pesticides detected. Since the estimated intake was less than 100% as compared to the ingestion limit, it was considered to be safe. I have suggested the edit as per my understanding. Please review for accuracy, and revise appropriately if required. This is the first pesticide Risk Assessment study encompassing military requirements. Considering the results, we expect further application research, including research on reducing hazardous materials.

• Korean Journal of Cognitive Science
• /
• v.7 no.1
• /
• pp.57-74
• /
• 1996

This paper presents a comparison of recognition performance of the features used inthe recent handwritten korean character recognition.This research aims at providing the basis for feature selecion in order to improve not only the recognition rate but also the efficiency of recognition system.For the comparison of feature performace,we analyzed the characteristics of theose features and then,classified them into three rypes:global feature(image transformation)type,statistical feature type,and local/ topological feature type.For each type,we selected four or five features which seem more suitable to represent the characteristics of korean alphabet,and performed recongition experiments for the first consonant,horizontal vowel,and vertical vowel of a korean character, respectively.The classifier used in our experiments is a multi-layered perceptron with one hidden layer which is trained with backpropagation algorithm.The training and test data in the experiment are taken from 30sets of PE92. Experimental results show that 1)local/topological features outperform the other two type features in terms of recognition rates 2)mesh and projection features in statical feature type,walsh and DCT features in global feature type,and gradient and concavity features in local/topological feature type outperform the others in each type, respectively.

• Journal of Korean Society of Forest Science
• /
• v.81 no.1
• /
• pp.21-29
• /
• 1992

This study was conducted to provide basic information for deciding silvicultural system appropriate to a natural mixed stand in Jindong-Ri. For this, the stand structure such as DBH distribution, height distribution, and volume per DBH class were analyzed and the possibility of selection cutting as a silvicultural system was discussed. The DBH structure of the stand has reverse J-shaped diameter distribution which is typical in a selection cutting stand. The possibility of selection cutting is also accepted in the height structure by showing multi-storied height distribution of the stand. On the other hand, volume structure per DBH class did not show the mature stand of selection cutting due mainly to the lack of number of trees at 30cm DBH class and above. It seems that the unclear part of stand structure should be solved by further studies. Also, the rate of increment for DBH and volume should be estimated to predict the future stand structure.