• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.19.1-19.1
• /
• 2010

The process of manufacturing printed electronics using printing technology is attracting attention because its process cost is lower than that of the conventional semiconductor process. This technology, which offers both a lower cost and higher productivity, can be applied in the production of organic TFT (thin film transistor), solar cell, RFID(radio frequency identification) tag, printed battery, E-paper, touch screen panel, black matrix for LCD(liquid crystal display), flexible display, and so forth. In general, in order to implement printed electronics, narrow width and gap printing, registration of multi-layer printing by several printing units, and printing accuracy of under $20\;{\mu}m$ are all required. These electronic products require high precision to the degree of tens of microns - in a large area with flexible material, and mass productivity at low cost. As such, the roll-to-roll printing process is attracting attention as a mass production system for these printed electronic devices. For the commercialization of this process, two basic electronic ink technologies, such as conductive ink and polymers, and printing equipment have to be developed. Therefore, this paper addressed basis design and test to develop fine patterning equipment employing the roll-to-roll printing equipment and electronic ink.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7A
• /
• pp.528-534
• /
• 2012

In order to achieve high capacity and reliable link quality of the overlay convergent networks with the cognitive networking based on the advanced capability of the mobile terminal, a Distributed Wireless Communication System (DWCS) can provide the capability of enhancing the link quality. This paper has considered virtual cell: the Dual Virtual Cell (DVC), and also proposes DVC employment strategy based on radio resource monitering. The considered system constructs DVC for multi-user high-rate data transmission, and the DWCS system exploits space-time trellis codes i.e., STTC to improve a spectral efficiency. The effects of imperfect CSI(channel state information) on the system performance has also been investigated.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11b
• /
• pp.236-244
• /
• 2005

Radioactive wastes arising from a wide range of human activities are in many different physical and chemical forms, contaminated with varying radioactivity. Their common feature is the potential hazard associated with their radioactivity and the need to manage them in such a way as to protect the human environment. The geological disposal is regarded as the most reasonable and effective way to safely disposal high-level radioactive wastes in the world. The conceptual model of geological disposal in China is based on a multi-barrier system that combines an isolating geological environment with an engineered barrier system. The buffer is one of the main engineered barriers for HLW repository. The buffer material is expected to maintain its low water permeability, self-sealing property, radio nuclides adsorption and retardation property, thermal conductivity, chemical buffering property, overpack supporting property, stress buffering property over a long period of time. Benotite is selected as the main content of buffer material that can satisfy above. GMZ deposit is selected as the candidate supplier for Chinese buffer material of High Level Radioactive waste repository. This paper presents geological features of GMZ deposit and basic property of GMZ Na bentonite. GMZ bentonite deposit is a super large scale deposits with high content of Montmorillonite (about $75\%$) and GMZ-l, which is Na-bentonite produced from GMZ deposit is selected as reference material for Chinese buffer material study.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.253-253
• /
• 2011

ZnTe semiconductor is very attractive a material for optoelectronic devices in the visible green spectral region because of it has direct bandgap of 2.26 eV. The prototypes of ZnTe light emitting diodes (LEDs) have been reported [1], showing that their green emission peak closely matches the most sensitive region of the human eye. The optoelectronic properties of ZnTe:O film allow to expect a large optical gain in the intermediate emission band, which emission band lies about 0.4-0.6 eV below the conduction band of ZnTe [2]. So, the ZnTe system is useful for the production of high-efficiency multi-junction solar cells [2,3]. In this work, the ZnTe:O thin films were deposited on Al2O3 substrates by using the radio frequency magnetron sputtering system. Three sets of samples were prepared using argon and oxygen as the sputtering gas. The deposition chamber was pre-pumped down to a base pressure of 10-7 Torr before introducing gas. The deposition pressure was fixed at 10-3 Torr throughout this work. During the ZnTe deposition, the substrate temperature was 300 oC. The optical properties were also investigated by using the ultraviolte-visible (UV-Vis) spectrophotometer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1667-1676
• /
• 1998

It is known that adaptive minimum mean square error (MMSE) receivers exhibit better performance than coventional single-user code division multiple access (CDMA) receivers in fixed (or static) channels and have the simple structure compared to other multi-user CDMA receivers. In practice, the radio channels are fading channels where the amplitude and phase of the received signal are time-varying and the sufficient signal-to-noise ratio is not always guaranteed. Thus, the performance of adaptive MMSE receivers is severely degraded in fading environments. We propose a new structure and adaptation algorithm for an adaptive MMSE receivers. Based on computer simulation results, it is observed that the proposed receiver demonstrates substantial performance improvement over currently available adaptive MMSE receivers in fading environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8A
• /
• pp.847-857
• /
• 2007

For the implementation of a RFID system, an anti-collision algorithm is required to identify multiple tags within the range of a RFID Reader. A Bit-by-Bit algorithm is defined by Auto ID Class 0. In this paper, we propose a SBBB(Stack Bit-by-Bit) algorithm. The SBBB algorithm save the collision position and makes a query using the saved data. SBBB improve the efficiency of collision resolution. We show the performance of the SBBB algorithm by simulation. The performance of the proposed algorithm is higher than that of BBB algorithm. Especially, the more each tag bit streams are the duplicate, the higher performance is.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.535-544
• /
• 2008

Unlike MS(Magnetic Stripe), SMART CARD is equipped with COS(Chip Operating System) consisting of the Microprocessor and Memory where information can be stored and processed, and there are two types of cards according to the contact mode; the contact type that passes through a gold plated area and the contactless one that goes through the radio-frequency using an antenna embedded in the plastic card. the contactless IC card used for the transportation card was first introduced into local area buses in Seoul, and expanded throughout the country so that it has removed the inconvenience such as possession of cash, fare payment and collection. Focusing on the Seoul metropolitan area in 2004, prepaid and pay later cards were adopted and have been used interchangeably between a bus and subway. The card terminal compatible between a bus and subway is Proximity Integrated Circuit Card(PICC) as international standards(1443 Type A,B), communicates in the 13.56MHz dynamic frequency modulation-demodulation system, and adopts the Multi Secure Application Module(SAM). In the second half of 2009, the system avaliable nationwide will be built when the payment SAM standard is implemented.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.37-46
• /
• 1996

In this paper, we analyzed the performance improvement of the DS-CDMA/dPSK cellular mobile communication system with CCI canceller and RAKE receiver techniques in mobile radio channel which is characterized by AWGN, Multi-user interference (mUI) and frequency-selective rayleigh fading. System capacity i.e., number of user per cell has been derived and the evaluated results are shown in figuraes as a function of PN code sequence length, number of RAKE receiver tap, BER and E$_{b}$/N$_{o}$. The voice activity factor is assumed to be 3/8 the number of sectors in a cell 3 and MUI is modeled as gaussian process. From the results, the capacity of the DS-CDMA/DPSK cellular mobile communication system is improved by adopting CCI canceller. When we adopt the RAKE receiver to mitigate the multipath fading, the error performance is improved and the amount of improvement is proportional ot the number of taps L in the case that each tap contains a signal component and the better of improvement can be obtained, the smaller of the SNR difference in each tap. The system capacity is more increased when the CCI canceller and the RAKE receiver is used in cascade.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.3
• /
• pp.166-176
• /
• 2007

Radio frequency (RF) microelectromechanical systems (MEMS) have been pursued for more than a decade as a solution of high-performance on-chip fixed, tunable and reconfigurable circuits. This paper reviews our research work on RF MEMS switches and switching circuits in the past five years. The research work first concentrates on the development of lateral DC-contact switches and capacitive shunt switches. Low insertion loss, high isolation and wide frequency band have been achieved for the two types of switches; then the switches have been integrated with transmission lines to achieve different switching circuits, such as single-pole-multi-throw (SPMT) switching circuits, tunable band-pass filter, tunable band-stop filter and reconfigurable filter circuits. Substrate transfer process and surface planarization process are used to fabricate the above mentioned devices and circuits. The advantages of these two fabrication processes provide great flexibility in developing different types of RF MEMS switches and circuits. The ultimate target is to produce more powerful and sophisticated wireless appliances operating in handsets, base stations, and satellites with low power consumption and cost.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.