• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제24권3호
• /
• pp.243-291
• /
• 2020

In this paper, multi-block generalized backward differentiation methods for numerical solutions of ordinary differential and differential algebraic equations are introduced. This class of linear multi-block methods is implemented as multi-block boundary value methods (MB₂ VMs). The root distribution of the stability polynomial of the new class of methods are determined using the Wiener-Hopf factorization of a matrix polynomial for the purpose of their correct implementation. Numerical tests, showing the potential of such methods for output of multi-block of solutions of the ordinary differential equations in the new approach are also reported herein. The methods which output multi-block of solutions of the ordinary differential equations on application, are unlike the conventional linear multistep methods which output a solution at a point or the conventional boundary value methods and multi-block methods which output only a block of solutions per step. The MB₂ VMs introduced herein is a novel approach at developing very large scale integration methods (VLSIM) in the numerical solution of differential equations.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.337-342
• /
• 2006

The use of GPS receiver at outer space becomes common in low earth orbit. The KOrea Multi-Purpose SATellite-1 (KOMPSAT-1) which was launched in December 1999 has used GPS receiver's navigation solution to perform the Orbit Determination (OD) in the ground. At the circumstance of using only one ground station, the Orbit Determination using GPS receiver is good method. Because the accuracy of navigation solution acquiring directly from GPS receiver is not enough in satellite application such as map generation, post-processing concepts such as the Precise Orbit Determination (POD) are applied to satellite data processing to improve satellite position accuracy. The POD uses GPS receiver's raw measurement data instead of GPS receiver's navigation solution. The KOrea Multi- Purpose SATellite-2 (KOMPSAT-2) system newly uses the POD technique for large scale map generation. The satellite was launched in the end of July 2006. The satellite sends high resolution images in panchromatic band and multi-spectral bands to the ground. The satellite system uses GPS receivers as source of time synchronization and command reference in the satellite, provider of navigation solution for the OD, and provider of raw measurement data for the POD. In this paper, mechanical configuration and operations of the GPS receiver will be presented. The GPS data characteristics of the satellite such as time synchronization, command reference, the OD using GPS receiver's navigation solution, and the POD using GPS receiver's raw measurement data will be presented and analyzed. The enhancement of performance compared with it of the previous satellite will also be analyzed.

• 한국안광학회지
• /
• 제12권3호
• /
• pp.19-25
• /
• 2007

현재 시중에서 유통되고 있는 소프트 콘택트렌즈 관리용액인 다목적용액(Multi Purpose Solution, MPS)이 결막세포주(Clone 1-5C-4 cell line)에 미치는 증식저해정도와 가토안의 각막상피 및 내피조직에 미치는 손상정도를 비교 관찰하고자 시행하였다. MPS는 $ReNu^{(R)}$ (Baush & Lomb, USA), Opti-free $express^{(R)}$ (Alcon, USA), Free-sol $plus^{(R)}$ (Hanamedicon, Korea)를 사용하였다. 세포증식 저해율은 결막세포주를 배양 한 후 MTT assay로 검정하였고, 형태학적으로는 광학현미경으로 Hematoxylin & Eosin staining 표본을 제작하여 관찰하였다. In vivo 실험은 백색 가토 9마리(18안)를 3군으로 분류하여 실험군인 좌안(9안)에는 각 MPS제품을, 대조군인 우안(9안)에는 보존제가 포함되지 않은 멸균생리식염수를 접안하였다. 일정기간 접안 후, 가토안의 각막표변을 Rose bengal로 염색하여 관찰하였고 각막상피 및 내피조직의 변화는 주사전자현미경(Scanning Electron Microscopy, SEM)으로 비교 관찰하였다.

• 유통과학연구
• /
• 제11권3호
• /
• pp.13-22
• /
• 2013

Purpose - Product purpose for optimal values solution for synthesize evaluative criteria and optimize product design values. In addition, product designer has to consider the product design to conform to project, laws and regulations, authentication, from the product design stage. Research design, data, methodology - How to use an evaluative criteria model's imprecise market data by evaluative criteria research design; product mapping relationships between design parameters and customer requirements using product predicted value method. An evaluative criteria model and their associated criteria status, product evaluative criteria model of results. Results - Therefore, after the enterprise product design project analysis, effectiveness and the customer degree of satisfaction must be appraised to obtain the maximum value for the benefit on behalf of the implementation goals, the promotion product level and market competition strength. Conclusions - In multi criterion decision making (MCDM), using its searching software capacity to obtain the optimal solution.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.115-123
• /
• 1994

Group scheduling, which is a kind of operations scheduling based on the GT concept is analyzed in a multi-stage manufacturing system. The purpose of this research is to develop and evaluate a heuristic algorithm for determining gro up sequence and job sequence within each group to minimize a complex cost function, i.e. the sum of the total pe-nalty cost for tardiness and the total holding cost for flow time, in a multi-stage manufacturing system with group setup time dependent upon group sequence. A heuristic algorithm for group sc heduling is developed, and a numerical example is illustrated. For the evaluation of the pro-posed heuristic algorithm, the heuristic solution of each of 63 problems is compared with that of random scheduling. The result shows that the proposed heuristic algorithm provides better solution in light of the proposed cost function.

• 터널과지하공간
• /
• 제14권1호
• /
• pp.16-25
• /
• 2004

저온가스를 지하공동에 저장하는 것은 안전과 운영 측면에서 많은 장점이 있다. 그러나 저장된 극저온가스는 주변암반의 온도변화를 야기하여 공동의 안정성에 영향을 줄 수 있다. 따라서 성공적인 저장공동의 건설을 위해서는 건설 초기에 공동 주위암반의 온도분포를 정확히 예측하는 것이 필수적이다. 본 연구의 목적은 저장공동 주변의 온도분포를 예측할 수 있는 이론해의 개발과 평가이다. 이를 위해, 공동의 형상을 단순화하고 비정상 열전도 이론을 적용하여 이론해를 도출하였다. 이론해의 적용성을 평가하기 위해서 이론해와 유한 차분 해석프로그램인 FLAC을 이용한 수치해석을 이용해 저장공동 주변의 2차원$.$3차원 온도분포를 추정하여 그 결과를 비교하였다. 또한, 공동의 크기에 대한 영향도 조사되었다.

• 한국안광학회지
• /
• 제12권4호
• /
• pp.37-41
• /
• 2007

본 연구는 RGP 렌즈용 다목적용액과 세척제를 이용한 RGP 렌즈 관리방법의 정립을 위해 수행하였다. 각 RGP 렌즈를 녹농균주 용액에서 배양한 후 RGP 렌즈용 다목적용액과 계면활성제 성분이 함유된 세척제로 처리한 후 렌즈에 남아있는 녹농균 수를 측정하였다. 30분 동안 다목적 용액에 침윤시키는 것만으로도 녹농균의 수가 50% 감소되었다. 4시간 동안 침윤시켰을 경우는 95%의 균이 제거되었으며, 6시간 동안 침윤시켰을 경우 녹농균이 검출되지 않았다. 세척제만을 사용하여 관리한 경우에는 79%의 녹농균이 제거되어 세척제를 사용하는 것이 30분간 침윤시키는 것보다 소독효과가 월등하다는 것을 확인할 수 있었다. 세척제를 사용한 후 30분간 RGP 렌즈용 다목적 용액에 침윤하였을 때의 녹농균의 수는 30분간 다목적 용액으로 침윤만 하였을 때의 녹농균 수의 36%에 불과하여 짧은 시간 동안 침윤에 의한 소독효과의 미비가 세척제를 이용한 관리로 크게 향상될 수 있음을 알 수 있었다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.238-243
• /
• 2003

As there are many advantages on underground caverns, such as safety and operation, they can also be used for gas storage purpose. When liquefied gas is stored underground, the cryogenic temperature of the gas will affect the stability of the storage cavern. In order to store the liquefied gas successfully, it is essential to estimate the exact temperature distribution of the rock mass around the cavern. In this study, an analytic solution and a conceptual model that can estimate three-dimensional temperature distribution around the storage cavern are suggested. When calculating the heat transfer within a solid, it is likely to consider the solid as the intersection of two or more infinite or semi-infinite geometries. Therefore heat transfer solution for the solid is expressed by the product of the dimensionless temperatures of the geometries, which are used to form the combined solid. Based on the multi-dimensional transient heat transfer theory, the analytic solution is successfully derived by assuming the cavern shape to be of simplified geometry. Also, a conceptual model is developed by using the analytic solution of this study. By performing numerical experiments of this multi-dimensional model, the temperature distribution of the analytic solution is compared with that of numerical analysis and theoretical solutions.

• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.155-160
• /
• 2001

To achieve high precision cutting as well as production capability in the machine tool, it is needed to develop excellent rigidity statically, dynamically and thermally as well. In order to predict the qualitative behavior of a machine tool, simultaneous analysis of mechanics and heat transfer is required. Generally, machine tool designers have solved designing problems based on partial estimation of the specified rigidity. This study clears the inter-relationship between therm, and propose multi-phase optimization of machine tool structure using a genetic algorithm. The multi-phase solution method is consists of a series of mechanical design problem. At this first phase of static design problem, multi-objective optimization for the purpose of minimization of the total weight and static compliance minimization is solved using the Pareto Genetic Algorithm.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2003년도 추계학술대회 및 정기총회
• /
• pp.148-151
• /
• 2003

Recently school food service operations are confronted with the wide spread pressures for accountability and the need to increase productivity. This paper is concerned with the make-or-buy decision framework for school food service systems considering the multi-attributes in the decision making. For the purpose of considering the multi-attributes analysis method in decision making for the school foodservice, we developed a make-or-buy decision framework using the multi-attribute analysis method, analytic hierarchy process, AHP method for school food service system. Finally, we developed a systematic and practical solution builder for a three-step decision support system in the view of 1) brainstorming for the idea generation, 2) analytic hierarchy process, AHP as a multi-attribute structure ed analysis method, and 3) aggregation logic model to integrate the results of reviewers. We developed web based program and applied it to a school foodservice problem.