• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.307-312
• /
• 2010

In this study, advanced computational technique for mechatronic analysis has been developed for the efficient design and test of typical machine tool models. Flexible multi-body dynamic (FMBD) analysis method combined with motion controller including control logics is used to simulate typical operation conditions. The present FMBD machine tool model is composed of flexible column structure, rigid body spindle, vertical motion guide (arm) and screw elements. Driving motor clement with rotating degree-of-freedom is interconnected and governed by the designed Matlab Simulink control logic, and then the position of the spindle is feedback into the control logic. It is practically shown from the results that the investigation of designed machine tools with controller can be effectively conducted and verified.

• 한국ITS학회 논문지
• /
• 제13권1호
• /
• pp.35-45
• /
• 2014

차량의 주행환경은 차량의 위치와 속도, 차량 사이의 거리변화가 심한 특징을 가진다. 차량 통신시스템의 성능은 차량의 주행환경에 영향을 받기 때문에, 정확한 성능 측정을 위해서는 실제 도로환경에서 주행환경을 고려하여 시스템 성능 시험을 수행해야 한다. 본 논문은 실제 도로환경에서 V2V/V2I 성능과 V2V 멀티홉 전송기능 시험 방법을 제안하고, 기 개발된 차량 통신시스템으로 측정한 시험 결과를 제시한다. 시험결과를 통해 통신장치의 거리와 차량의 주행 방향이 통신성능에 영향을 주는 것을 확인하였다. 또한 제안된 멀티홉 시험 방법으로 제한된 지역 내에서 주행하는 차량을 활용하여 멀티홉 전송 기능을 확인하였다.

• 한국멀티미디어학회논문지
• /
• 제24권3호
• /
• pp.355-372
• /
• 2021

Recently, high-performance HMDs (Head-Mounted Display) are becoming wireless due to the growth of virtual reality technology. Accordingly, environmental constraints on the hardware usage are reduced, enabling multiple users to experience virtual reality within a single space simultaneously. Existing multi-user virtual reality platforms use the user's location tracking and motion sensing technology based on vision sensors and active markers. However, there is a decrease in immersion due to the problem of overlapping markers or frequent matching errors due to the reflected light. Goal of this study is to develop a multi-user virtual reality moving platform in a single space that can resolve sensing errors and user immersion decrease. In order to achieve this goal hybrid sensing technology was developed, which is the convergence of vision sensor technology for position tracking, IMU (Inertial Measurement Unit) sensor motion capture technology and gesture recognition technology based on smart gloves. In addition, integrated safety operation system was developed which does not decrease the immersion but ensures the safety of the users and supports multimodal feedback. A 6 m×6 m×2.4 m test bed was configured to verify the effectiveness of the multi-user virtual reality moving platform for four users.

• 천문학회보
• /
• 제40권1호
• /
• pp.59.2-59.2
• /
• 2015

We present the results of simultaneous observations of the H2O and SiO masers emitted from the circumstellar envelopes of the late-type stars. These observations have been carried out at the K and Q bands using KVN since 2014 August and were scheduled to test the feasibility of multi-frequency phase referencing analysis on the maser lines. In order to increase the accuracy of group delay solution in the fringe search on the continuum source, the IF channels were randomly distributed within the available bandwidth of 500 MHz in each band. The positions of all maser spots are relatively described with respect to the position of the reference continuum source through the source frequency phase referencing technique, and this provides the astrometric position accuracy. Therefore, the relative locations of the H2O maser spots with respect to the SiO maser spots are determined from our observations, and the capability of the simultaneous multi-band observation of KVN is proved to be powerful to study the maser pumping mechanism around the late-type stars.

• 한국해양공학회지
• /
• 제30권6호
• /
• pp.458-467
• /
• 2016

In this paper, a strongly coupled method for investigating the interaction between a cable and tow-fish is presented. The nodal position finite element method was utilized to analyze the nonlinear cable dynamics, and 6DOF equations of motion were employed to describe the 3D rigid body motion of the tow-fish. Combining cable and tow-fish systems into a single formulation allowed the two nonlinear systems to be strongly coupled into a unified nonlinear system. This strongly coupled system was numerically integrated in the time domain using a predictor/multi-corrector Newmark algorithm. To demonstrate the validity, efficacy, and applicability of the current approach, two different scenarios (virtual and sea trial) were simulated, and the simulation results were validated using the physical plausibility and the sea trial test.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.708-715
• /
• 2010

In Strapdown Inertial Navigation System, alignment accuracy is the most important factor to determine the performance of navigation. However by an existing self-alignment method, it takes a long time to acquire the alignment accuracy that we want. So, to attain the desired alignment accuracy in as little as $\bigcirc$ minutes, we have developed the precise multi-position alignment method. In this paper, it is proposed a inertial measurement matching transfer alignment method among alignment methods to minimize the alignment error in a short time. It is based on a mixed velocity-DCM matching method be suitable to the operating environment of vertical launching system. The compensation methods to reduce misalign error, especially azimuth angle error incurred by measurement time-delay error and body flexure error are analyzed and evaluated with simulation. This simulation results are finally confirmed by experimentations using FMS(Flight Motion Simulator) in Lab and the integration test to follow the fire control mission.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.235-240
• /
• 2002

This paper shows the desist concept of an ATS(Antenna Tracking Software) to control the movement of the MSC(Multi-Spectral Camera) antenna. The MSC has a two-axes directional X-band antenna for image transmission to KGS(KOMSAT2 Ground Station). The main objective of the ATS is to drive the APM(Antenna Pointing Mechanism) to the required elevation and the azimuth position according to an appropriate TPF(Tracking Parameter File). The ATS is implemented as one task of the SBC(Single Board Computer) software, which uses VxWorks as a real time OS. The ATS has several operational modes such as STANDBY mode, First EL mode, First AZ mode, Normal Operation mode, and so on. The ATS uses two PI controllers fur the velocity and the position loop respectively, to satisfy the requirements specification. In order to show the feasibility of the described design concept, the various simulations and the experiments are performed under specific test configuration.

• 한국정밀공학회지
• /
• 제2권1호
• /
• pp.72-81
• /
• 1985

This paper deals with the Z-8000 microprocessor based optimal controller problem of large rotating system. Control algorithm consists of Global Mode and Fine Mode. In Global Mode, motor is driven with maximum torque, while, in Fine Mode, the speed of response and overshoot improved by multi-gains. Friction term of the plant was measured in the 1-st test, jerking effect by the nonlinearity of friction was compensated in the 2-nd test and the 3-rd test was carried out to finalize the control system model. Test results show that the speed of response and overshoot are highly improved.

• 항공우주시스템공학회지
• /
• 제15권1호
• /
• pp.102-110
• /
• 2021

최근 멀티콥터는 비행 안정성 향상을 위해 다양한 충돌회피 센서를 탑재하고 있다. LiDAR를 이용해 3차원 위치를 인식하거나 다수 카메라와 실시간 SLAM 기술을 이용해 장애물과의 상대 위치를 계산하기도 한다. 또한 소형 프로세스와 카메라로 구성된 3D 깊이 센서를 사용하기도 한다. 본 연구에서는 충돌회피 소프트웨어 기술 개발을 위한 플랫폼으로써 상용 부품을 활용해 실내 비행이 가능한 소형 충돌회피 멀티콥터 시스템을 개발하였다. 멀티콥터 시스템은 LiDAR, RealSense, GPU 보드를 탑재하였고, 비행시험을 통해 YOLO 알고리즘 기반의 사물 인식 및 충돌회피 기능을 검증하였다. 이 논문에서는 시스템 설계/제작 및 탑재 장비 선정과정, 비행시험 결과에 관해 기술하였다.

• ETRI Journal
• /
• 제27권4호
• /
• pp.418-426
• /
• 2005

A calibration technique for a redundant inertial measurement unit (IMU) containing low-grade inertial sensors is proposed. In order to calibrate a redundant IMU that can detect and isolate faulty sensors, the fundamental coordinate frames in the IMU are defined and the IMU error is modeled based on the frames. Equations to estimate the error coefficients of the redundant IMU are formulated, and a test sequence using a 2-axis turntable is also presented. Finally, a redundant IMU with cone configuration is implemented using low-grade inertial sensors, and the performance of the proposed technique is verified experimentally.