• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3732-3753
• /
• 2023

The Real-time Analysis for Particle-transport and In-situ Detection (RAPID) Code System, developed based on the Multi-stage Response-function Transport (MRT) methodology, enables real-time simulation of nuclear systems such as reactor cores, spent nuclear fuel pools and casks, and sub-critical facilities. This paper presents the application of a novel fission matrix-based burnup methodology to the well-characterized JSI TRIGA Mark II research reactor. This methodology allows for calculation of nuclear fuel depletion by combination and interpolation of RAPID's burnup dependent fission matrix (FM) coefficients to take into account core changes due to burnup. The methodology is compared to experimentally validated Serpent-2 Monte Carlo depletion calculations. The results show that the burnup methodology for RAPID (bRAPID) implemented into RAPID is capable of accurately calculating the k_eff burnup changes of the reactor core as the average discrepancies throughout the whole burnup interval are 37 pcm. Furthermore, capability of accurately describing 3D fission source distribution changes with burnup is demonstrated by having less than 1% relative discrepancies compared to Serpent-2. Good agreement is observed for axially and pin-wise dependent fuel burnup and nuclear fuel nuclide composition as a function of burnup. It is demonstrated that bRAPID accurately describes burnup in areas with high gradients of neutron flux (e.g. vicinity of control rods). Observed discrepancies for some isotopes are explained by analyzing the neutron spectrum. This paper presents a powerful depletion calculation tool that is capable of characterization of spent nuclear fuel on the fly while the reactor is in operation.

• 천문학논총
• /
• 제27권4호
• /
• pp.305-310
• /
• 2012

AKARI's all-sky survey resolves the far-infrared emission in many thousands of nearby galaxies, providing essential local benchmarks against which the evolution of high-redshift populations can be measured. This review presents some recent results in the resolved galaxy populations, covering some well-known nearby targets, as well as samples from major legacy surveys such as the Herschel Reference Survey and the JCMT Nearby Galaxies Survey. This review also discusses the prospects for higher redshifts surveys, including strong gravitational lens clusters and the AKARI NEP field.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.139-142
• /
• 2005

The Digital Meister is an advisory system to help the designer using the knowledge obtained from design and analysis data. In this paper, Taguchi method was applied to analyze the design parameters of automotive engine pulley. As a finite element method (FEM), ALGOR Multi-physics was used for analyzing the static analysis. As a result, two bending positions and material thickness were highly related to the maximum stress. These correlations between design parameters and analysis result will be used for supporting the design process of Digital Meister.

• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.116-125
• /
• 2008

Inkjet printing technology with a drop-on-demand (DOD) inkget head technology has been recognized as one of versatile and low cost manufacturing tools in the electronics industry. Concerned with control of driving signal, however, general strategy to optimize jetting stability has not been understood well, because of the inherent complex multi-physics nature in inkjet phenomena. Motivated by this, present study investigates the effect of driving waveforms of piezoelectric head on jetting characteristics of DOD inkjet system focused on jetting stability with phase matching of pressure waves in the print head. The results show that velocities and volumes of the ink jetted droplets were linear relations with the driving signal's maximum voltage, while periodic behaviors are observed with the driving signal's pulse widths.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1444-1449
• /
• 2007

Inkjet printing technology with a drop-on-demand (DOD) inkjet head technology has been recognized as one of versatile and low cost manufacturing tools in the electronics industry. Concerned with control of driving signal, however, general strategy to optimize jetting stability has not been understood well, because of the inherent complex multi-physics nature in inkjet phenomena. Motivated by this, present study investigates the effect of driving waveforms of piezoelectric head on jetting characteristics of DOD inkjet system focused on jetting stability with phase matching of pressure waves in the print head. The results show that velocities and volumes of the ink jetted droplets were linear relations with the driving signal's maximum voltage, while periodic behaviors are observed with the driving signal's pulse widths.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.173-178
• /
• 2015

In lieu of the excellent radio frequency (RF) performance of microelectromechanical system ( MEMS) switches, these micro switches need higher actuation voltage for their operation. This requirement is secondary to concerns over the swtiches’ reliability. This paper reports high reliability operation of RF MEMS switches with low voltage requirements. The proposed switch is optimised to perform in the Q-band, which results in actuation voltage of just 16.4 V. The mechanical stress gradient in the thin micro membrane is computed by simulating von Mises stress in a multi-physics environment that results in 90.4 MPa stress. The computed spring constant for the membrane is 3.02 N/m. The switch results in excellent RF performance with simulated isolation of above 38 dB, insertion loss of less than 0.35 dB and return loss of above 30 dB in the Q-band.

• 식품과학과 산업
• /
• 제51권1호
• /
• pp.61-71
• /
• 2018

The evaluation of food taste is one of the important activities of human consciousness and it is practiced by sensory analysis using 5 terminal sensorial consciousness among many other functions. These consciousness activities may be conducted by 3 way branching transformation (3-WBT) logic, which choose one out of 3 options under the multi-layered consciousness decision making system. On the basis of this logic, cognitive sensory evaluation (CSE) method was developed to carry out questionnaire survey covering objective and subjective issues during consumption of food for pregnant women. The results of the CSE for several food items was presented with the Table-pattern called CSET covering consciousness factors and their effects on the food consumers.

• 열처리공학회지
• /
• 제26권5호
• /
• pp.233-240
• /
• 2013

Rapid and homogeneous heating in heat treatment has been a challenging engineering issue throughout a heating temperature over $1,000^{\circ}C$. Induction heating has been widely used in field of heat treatment compared with conventional heating system. Advantages in homogeneous heating, simple fabrication, and repeatable use can be efficiently made with the induction heater. In this paper, numerical analysis of an induction coil system for heat flux gauge heating is performed. The effect of configuration on the heating performance was considered in various cases of the coil radius, distance between the winding, relative height difference between the heat flux gauge and the coil, and the applied current frequency. Temperature distribution within the heat flux gauge at frequency-steady state was calculated with a finite element method. Sensitivity analysis was also performed and the relative importance of 2 key parameters; coil radius, distance between the winding, were taken as main contributors for induction heating.

• 유공압시스템학회논문집
• /
• 제6권2호
• /
• pp.1-6
• /
• 2009

The APU(Auxiliary Power Unit) needs a set of complex pipeline for the fuel supply system where some of the main valves controlling the flow rate consist of the servo valve worked with a torque motor. The input electric current produces an induced magnetic field almost perpendicular to the background magnetic filed generated by fixed permanent magnets. The induced torque deforms the tubular bushing, and directly rotates an armature, which can open and close the valve. In this study, we start from a basic analytic model using a simple electro-magneto-statics, and expand our model to the three-dimensional one computationally applying a commercial code named COMSOL. The result is compared with each other, and reasonable numerical data are obtained for the dynamic behavior and multi-physics system.

• 한국음향학회지
• /
• 제43권2호
• /
• pp.145-151
• /
• 2024

함정 선체부착형 수동소나체계는 최근 표적탐지성능을 향상시키고자 함내 진동유기 소음을 제거하려는 연구가 활발히 진행중이다. 본 연구진은 신호처리의 관점에서 음향센서와 진동센서가 설치된 복합센서를 이용한 음향-진동 정합기법을 개선책으로 제시한다. 본 논문에서는 정합기법의 이론적 배경에 대해 기술한 후, 그것이 다중물리 유한 요소해석 상에서 실현됨을 보였다. 나아가 정합기법을 센서 시스템에 적용할 시의 표적신호 수신감도 상승 및 진동유기 소음 제거 성능을 산출하였으며, 정합기법의 실용성과 향후 연구방향에 대해 논하였다.