• Nuclear Engineering and Technology
• /
• 제56권11호
• /
• pp.4895-4904
• /
• 2024

The helical-coiled once-through steam generator (H-OTSG) has the advantages of compact structure and strong heat transfer ability, and is appropriate for lead-cooled fast reactor. The two-phase flow instability may cause mechanical vibration and thermal fatigue of heat transfer tube bundles, posing a serious threat to the safe operation of the H-OTSG. In this work, the secondary side of the H-OTSG characterized as multi-parallel channels is modeled by RELAP5/MOD3.4 code, and the oscillation behavior during start-up and the influence of structural and operating parameters on system stability are studied based on time-domain method. The results indicate that the pressure, flow rate, and temperature of the secondary fluid exhibit density wave oscillations at the heating section in a (n-2,2) pattern. In addition, increasing inlet throttling, reducing outlet throttling, controlling subcooling within an appropriate range and avoiding operation under low loads are all beneficial for improving the system stability of the helical-coiled once-through steam generator.

• 수산해양교육연구
• /
• 제28권5호
• /
• pp.1273-1279
• /
• 2016

Flow boiling pressure drop in multi channels was experimently investigated. The multi channel has a width and depth of 0.45 and 0.2mm respectively, and comprises 15 parallel channels. The measured total pressure drop is expressed by the sum of the frictional pressure drop and acceleration pressure drop. In order to predict the total pressure drop, it is required to obtain the correct frictional pressure drop. The existing correlations to predict the frictional pressure were compared with measured frictional pressure drop. The new correlation was developed in the form of the Chisholm correlation. It was related to Chisholm Constant B as a function of Martinelli parameter. The new correlation predicted the experimental data within a mean absolute error of 5.5%.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.42-46
• /
• 2019

In this paper, we introduce the novel idea to improve parallel test efficiency of semiconductor test. The idea includes the test interface card consisting of NoC structure able to transmitting test data regardless of ATE speed. We called the scheme "Multi-Clock" mode. In the proposed mode, because NoC can spread over the test data in various rates, many semiconductors are tested in the same time. We confirm the proposed idea will be promising through a FPGA board test and it is important to find a saturation point of the Multi-Clock mode due to the number of test chips and ATE channels.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.245-248
• /
• 2000

In this paper, we present the performance of a multi-code parallel combinatory CDMA system using bi-orthogonal modulation under multipath fading channel. In general, the dynamic range of the amplitude of the transmit signal is very large in conventional multi-code CDMA systems, resulting in severe nonlinear distortion due to high power amplifier and thus significant BER performance degradation. Since the number of simultaneously multiplexed code channels in the proposed system is reduced, the proposed system exhibits reduction of peak-to-average power ratio (PAPR) of the transmit signal amplitude with significant BER improvement. We verify the performance of the proposed system by computer simulations under the Vehicular B multipath fading channel model by ARIB.

• Journal of Communications and Networks
• /
• 제18권1호
• /
• pp.75-83
• /
• 2016

In this paper, we propose a multi-channel medium access control (MAC) protocol, named underwater multi-channel MAC protocol (UMMAC), for underwater acoustic networks (UANs). UMMAC is a split phase and reservation based multi-channel MAC protocol which enables hosts to utilize multiple channels via a channel allocation and power control algorithm (CAPC). In UMMAC, channel information of neighboring nodes is gathered via exchange of control packets. With such information, UMMAC allows for as many parallel transmissions as possible while avoiding using extra time slot for channel negotiation. By running CAPC algorithm, which aims at maximizing the network's capacity, users can allocate their transmission power and channels in a distributed way. The advantages of the proposed protocol are threefold: 1) Only one transceiver is needed for each node; 2) based on CAPC, hosts are coordinated to negotiate the channels and control power in a distributed way; 3) comparing with existing RTS/CTS MAC protocols, UMMAC do not introduce new overhead for channel negotiation. Simulation results show that UMMAC outperforms Slotted floor acquisition multiple access (FAMA) and multi-channel MAC (MMAC) in terms of network goodput (50% and 17% respectively in a certain scenario). Furthermore, UMMAC can lower the end-to-end delay and achieves a lower energy consumption compared to Slotted FAMA and MMAC.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1082-1086
• /
• 2014

A multi-channel microchip electrophoresis (MCME) method with parallel laser-induced fluorescence (LIF) detection was developed for rapid screening of H1N1 virus. The hemagglutinin (HA) and nucleocapsid protein (NP) gene of H1N1 virus were amplified using polymerase chain reaction (PCR). The amplified PCR products of the H1N1 virus DNA (HA, 116 bp and NP, 195 bp) were simultaneously detected within 25 s in three parallel channels using an expanded laser beam and a charge-coupled device camera. The parallel separations were demonstrated using a sieving gel matrix of 0.3% poly(ethylene oxide) ($M_r$ = 8,000,000) in $1{\times}$ TBE buffer (pH 8.4) with a programmed step electric field strength (PSEFS). The method was ~20 times faster than conventional slab gel electrophoresis, without any loss of resolving power or reproducibility. The proposed MCME/PSEFS assay technique provides a simple and accurate method for fast high-throughput screening of infectious virus DNA molecules under 400 bp.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.29-32
• /
• 2000

In this paper, we present an extension of the multi-code CDMA (code division multiple access) systems based on bi-orthogonal modulation by employing a convolutional encoder and an interleaver before serial-to-parallel conversion in the modulator. Bandwidth expansion by the convolutional encoder can be compensated for by the bi-orthogonal modulation, and the interleaver in the system scrambles the convolutionally encoded data bits so that, after serial-to-parallel conversion, each code channel conveys those bits far apart in time. The result is that the proposed system with several order of magnitude less implementational complexity, achieves quite close performance of the conventional systems comprised of Walsh modulation and multiple convolutional encoders and interleavers in all the code channels.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.113-116
• /
• 2003

In this paper, we propose a dynamic parallel channel allocation mechanism that dynamically controls total number of allocation channels of each subscriber to effectively service user bandwidth demands while high utilization and fairness are guaranteed in WDM based optical access networks. The logical performance gain of statistical multiplexing by dynamic channel allocation is validated with analytic method as well as simulations. We also introduce the adaptive padding scheme in order to efficiently distribute forwarded frames to aggregated multi-link channels which are formed by parallel channel allocation mechanism. The proposed scheme shows the performance enhancement by minimizing unnecessary padding size and the processing time.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.774-782
• /
• 2004

This article presents a numerical and experimental investigation for the single-phase forced laminar convective heat transfer through arrays of micro-channels in micro heat exchangers to be used for cooling power-intensive semiconductor packages, especially the stacked multi-chip modules. In the numerical analysis, a parametric study was carried out for the parameters affecting the efficiency of heat transfer in the flow of coolants through parallel rectangular micro-channels. In the experimental study, the cooling performance of the micro heat exchanger was tested on prototypes of stacked multi-chip modules with difference channel dimensions. The simulation results and the experiment data were acceptably accordant within a wide range of design variations, suggesting the numerical procedure as a useful method for designing the cooling mechanism in stacked multi-chip packages and similar electronic applications.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.49-52
• /
• 2000

The Multi-Code CDMA systems that are proposed as an effective transmission methodology in the IMT-2000 systems allow higher rate services under the IS-95 CDMA infrastructure. The Multi-Code CDMA systems convert the higher rate data into the lower rate by serial to parallel operation and spread the converted data streams by the multiple walsh codes, and its mobile receiver needs multiple walsh generators and data correlators to demodulate simultaneously multiple walsh code channels. Therefore, the number of data correlators is increased as the number of traffic channels increases. In this paper, we proposed the new structure of the data correlators using walsh overlay coding, the shared accumulator, and FWHT(Fast Walsh Hadamard Transform) algorithm for reducing the bottle-neck effect resulting the increase of the number of data correlators.