• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.745-746
• /
• 2006

This lecture introduces new press, adapter and control concepts to size multi-level sintered components. The essential thing here is that the advantages of the multi-plate technology have been applied to the sizing adapter concept. Thus, the new concept meets the demands for a modern P/M manufacture and offers sufficient potential to size any future, complex sintered components such as synchronizer hubs, oil pump wheels and VCT parts with highest precision. Furthermore, it outlines a new flexible concept for the parts transfer, including feeding, orientation and lubrication while responding to the high demands on process stability and short change-over times.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.1
• /
• pp.26-32
• /
• 2000

Design load calculations which depend on the thermal characteristics of the building structure such as the wall, roof, and fenestration provide the basic data for selecting an HVAC system and its equipment. Most of domestic multi-family houses include a high thermal storage layer like massive concrete structure and a floor heating structure. This study is to compare the results of the design heating load between steady state and unsteady state calculation in order to comprehend the thermal storage effect in multi-family houses. The design heating load under the steady state calculation is estimated from 5.4% to 7.8% larger than that under the unsteady state in the typical floor of a multi-family house model. The design heating load considered the safety factors like a orientation and location factor also is 21.4% to 26.5% larger than that by the unsteady state calculation. So, the safety factors for use of the practicing engineer are analyzed as the main factor of a heating plant oversizing.

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.313-320
• /
• 1995

We investigated the preferred orientation, electrical and magnetic properties of the Mn-Zn ferrite thin films deposited on SiO2/Si(100) by ion beam sputtering. The Cu-added Mn-Zn ferrite thin films had a preferred orientation of (111) with a weak orientation, (311). While the Zn-added one had a strong (111) preferred orientation. The saturation magnetization of the Cu- or Zn-doped Mn-Zn ferrite films increased with increasing substrate temperature (Ts) due to the increase of grain size and the enhancement of crystallinity. For the same reason the coercivity of Cu- or Zn-doped Mn-Zn ferrite films deposited at low Ts increased with increasing Ts, but those of the films deposited at high Ts slightly decreased not only because the defect density of the films decreases but because more grains have multi-domains with increasing Ts. The resistivity of Cu- or Zn-added Mn-Zn ferrite thin fims measured by complex impedance method decreased with increasing Ts due to the ehhancement of crystallinity as well as due to the increase of grain size.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2181-2193
• /
• 1995

The effective elasticity and conduction of composite materials containing arbitrarily oriented multiple phases has been analyzed using the concept of orientation-dependent average fields and concentration factors. The analysis provided closed form expressions for the effective stiffnesses and conductivities. Under the prescribed boundary conditions, the concentration factors were evaluated by the equivalent inclusion principle, through which the interaction between various phases is approximated by the Mori-Tanaka mean-field approximation. SiC particulate(SiC$_{p}$) reinforce aluminum(Al) matrix composites were fabricated and their elastic constants and electrical conductivities were measured together with a careful study of their microstructure. The measured properties showed a systematic anisotropy and this behavior could be attributed to the preferred orientation of SiC$_{p}$. The theoretical model developed was applied to the computation of the anisotropic properties of these composites. Both two-phase and three-phase composites were considered based on the microstructural information. The SiC$_{p}$ was modeled as an ellipsoid with planar random orientation distribution in the extruded Al/SiC$_{p}$ composites. The effect of extraneous phase such as intermetallic compounds was also investigated.tigated.

• Journal of the Korean housing association
• /
• v.15 no.2
• /
• pp.87-96
• /
• 2004

In this study, we analyzed the state of outdoor-space use and green-environment development for apartment residents, and investigated their ways of thinking on nature orientation and green environment. The results are as follows. 1) The ways of thinking and actual use of outdoor space by apartment residents appear different. 2) Due to the difference of apartment locations and complex environments, the state and reason of green environment construction are different between the residents of high-rise and low-storied apartments. 3) The residents of the low-storied apartments are more satisfied with the green environments of the complex than those of the high-rise apartments. In addition, constructing the green environment in a balcony and outdoor space enhances the satisfaction level of the apartment residents. 4) The residents of the low-storied apartments are passive in nature orientation, while those of the high-rise apartments are active. 5) Depending on the types of nature orientation, the apartment residents are grouped as 'people of nature experience', 'nature appreciators', or 'people of living-thing contact'. These groups show different patterns on the ways of thinking for outdoor space and green environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.502-506
• /
• 2012

In order to find the structural characteristics of the thin films of group II-VI semiconductor compounds compared with those of powder materials, films were made of 4 powders of ZnS, CdS, CdSe, and CdTe(Aldrich), each with 99.99 % purity. For the ZnS/CdS multi-layers, the ZnS layer was coated over the CdS layer on an $AlO_x$ membrane, which served as a protective layer within a vacuum at the average speed of 1 ${\AA}$/sec. After studying the structures of the group II-VI semiconductor thin films by using X-ray spectroscopy, we found that the ZnS, ZnS/CdS, CdS, and CdSe films were hexagonal and exhibited some degree of preferred orientation. Also, the particles of the thin films of II-VI semiconductor compounds proved to be more homogeneous in size compared to those of the powder materials. These results were further verified through scanning electron microscopy(SEM), EDX analysis, and powder and thin film X-ray diffraction.

• Culinary science and hospitality research
• /
• v.20 no.1
• /
• pp.1-17
• /
• 2014

Under the needs to study the predictors of the frontline employees' service-oriented organizational citizenship behaviors(OCBs) in the hotel industry, this study aimed to the influence of goal orientations on the OCBs. The two factors of performance goal and learning goal orientations were hypothesized to influence each dimension of OCBs(loyalty, service delivery, and participation). The data from 266 five star deluxe hotel employees were analyzed with descriptive statistics, multi-variate analysis of variance, and structural equation modeling conducted using SPSS 19.0 and AMOS 20.0. The results showed learning goal orientation positively influenced all dimensions of the OCBs while performance goal orientation positively influenced all dimensions except loyalty. These results suggest that hotel practitioners need to seek the applicants who are willingly oriented to specific goals at recruiting process. Furthermore, hotel organizations need to utilize the employees' goal approach to motivate their performances.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.526-536
• /
• 2008

This study is to analyze and examine the relations of lifestyle, fashion behavior, and make-up behavior of post digital generation and to provide the basic data which help to establish and perform the distinctive marketing strategies targeting the post digital generation. Subjects were 1,460 male and female undergraduates who attend colleges or universities in Seoul, Busan, and Daegu. Average, standard deviation, MANOVA, and ANOVA were conducted using SPSS 12.0 statistic program. The results were as follows: The higher points the group got in all the subfactors regarding information seeking pursuit and sensation intention fascination pursuit, the higher points the group had in the subfactors of fashion behavior and make-up behavior. The group with higher fashionenjoyment pursuit appeared to seek after more brand price choice behavior, internet shopping purchasing behavior, fashion information source seeking behavior, and impulse buying behavior in the subfactors of fashion behavior as well as more self-satisfaction appearance orientation and fashion information buying orientation in the subfactors of make-up behavior. With the group in pursuit of more multi activities, not only were brand price choice behavior and fashion information source seeking behavior in the subfactors of fashion behavior sought after more, but self-satisfaction appearance orientation and fashion information buying orientation in the subfactors of make-up behavior were pursued more as well. The more interpersonal relations the group had, the more self-satisfaction appearance orientation and fashion information buying orientation in the subfactors of make-up behavior as well as the more brand price choice behavior, fashion information source seeking behavior, impulse buying behavior, other-regarding behavior and independent buying behavior in the subfactors of fashion behavior the group had.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.240-245
• /
• 2001

The effect of additives on the orientation of magnetic Sr-ferrite powders has been studied during powder injection molding under applied magnetic field for fabricating multi-pole anisotropic sintered Sr-ferrite magnets. The orientation of the Sr-ferrite powders depends sensitively on the fluidity of powder-binder mixture, related to the binder additives and the injection molding temperature, and the magnetic field intensity. The orientation of Sr-ferrite powders is good for the compacts with stearic acid added in the binder system of paraffin wax/carnauba wax/HDPE, but it is poor for the compacts with silane coupling agent added. The orientation of Sr-ferrites higher than 80% is achieved at the following useful conditions; apparent viscosity lower than 2500 poise in 1000 sec$^{-1}$ shear rate and applied magnetic field higher than 4 kOe.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.119-131
• /
• 2020

The purpose of this study is to examine the mediated effects of entrepreneurship and market orientation on organizational culture and management performance as the cause of the reversal phenomenon of startups defeating traditional giants. Through the research method of bootstrapping proposed by Hayes (2013), the total effect, direct effect and indirect effect analysis were conducted. As a result, there was no direct impact relationship between organizational culture and management performance, but it was confirmed that it had a positive impact on management performance by mediating both entrepreneurial behavior and market orientation in the relationship between organizational culture and management performance. This study is meaningful in that it is linked to existing theories such as entrepreneurship and market orientation and it extends the scope of competency targets required for business performance to an organizational culture. Companies need to create an innovation-oriented organizational culture for management performance and value creation, and they have to open up their culture with entrepreneurial behavior and market orientation by breaking away from the inertia of organization.