• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.642-652
• /
• 2007

Many contracting firms and project managers in the construction industry have started to utilize multi objective optimization methods to handle multiple conflicting goals for completing the project within the stipulated time and budget with required quality and safety. These optimization methods have increased the pressure on decision makers to search for an optimal resources utilization plan that optimizes simultaneously the total project cost, completion time, and crashing cost by considering indirect cost, contractual penalty cost etc., practically charging them in terms of direct cost of the project which is fuzzy in nature. This paper presents a multiple fuzzy goal programming model (MFGP) that supports decision makers in performing the challenging task. The model incorporates the fuzziness which stems from the imprecise aspiration levels attained by the decision maker to these objectives that are quantified through fuzzy linear membership function. The membership values of these objectives are then maximized which forms the fuzzy decision. The problem is solved using LINGO 8 optimization solver and the best compromise solution is identified. Comparison between solutions of MFGP, fuzzy multi objective linear programming (FMOLP) and multiple goal programming (MGP) are also presented. Additionally, an interactive decision making process is developed to enable the decision maker to interact with the system in modifying the fuzzy data and model parameters until a satisfactory solution is obtained. A case study is considered to demonstrate the feasibility of the proposed model for optimization of project network parameters in the construction industry.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.918-922
• /
• 2009

The power expansion planning is large and capital intensive capacity planning. In the past, the expansion planning was established with the proper supply reliability in order to minimize social cost. However, the planning cannot use cost minimizing objective function in the power markets with many market participants. This paper proposed the power expansion planning process in the power markets. This system is composed of Regulator and GENCO's model. Regulator model used multi-criteria decision making rule. GENCO model is very complex problem. Thus, this system transacted the part by several scenario assuming GENCO model.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.4
• /
• pp.109-118
• /
• 2002

Such effects would be paid off in the right way only when management of the firms perform marketing activities focusing on long term effectiveness, which would drive company profits up and keep them for long. Demands of customers are being changed and varied. In this result with the advantage of mass marketing and database marketing have been drawing attentions from company. To fulfill these demands of customer, they need a concept of eCRM(Web based Customer Relationship Management), and go from selling products and services, or gathering customer requests, up to the phase of solving customer's problem by real time or previous action. With the help of internet, the frequency and speed of the problem solving has improved greatly. For these purposes, we try to determine the most important and most urgent factors in eCRM: utilization by using SN Ratio Decision making, one of the Multi-criteria decision-making methods SN Ratio Decision making is widely used for determining relative magnitude per evaluation item, i. e. priority on problems and is expected to make more systematic and objective evaluations than conventional methods do. Even in the present situation where any general criterion on eCRM dose not exist, utilization of eCRM is expected to be actively continued, which will cause many problems. In this regard, evaluating eCRM counts.

• Steel and Composite Structures
• /
• v.32 no.4
• /
• pp.455-466
• /
• 2019

Despite the rapid advancement in computing resources, many real-life design and optimization problems in structural engineering involve huge computation costs. To counter such challenges, approximate models are often used as surrogates for the highly accurate but time intensive finite element models. In this paper, surrogates for first-order shear deformation based finite element models are built using a polynomial regression approach. Using statistical techniques like Box-Cox transformation and ANOVA, the effectiveness of the surrogates is enhanced. The accuracy of the surrogate models is evaluated using statistical metrics like $R^2$, $R^2{_{adj}}$, $R^2{_{pred}}$ and $Q^2{_{F3}}$. By combining these surrogates with nature-inspired multi-criteria decision-making algorithms, namely multi-objective genetic algorithm (MOGA) and multi-objective particle swarm optimization (MOPSO), the optimal combination of various design variables to simultaneously maximize fundamental frequency and frequency separation is predicted. It is seen that the proposed approach is simple, effective and good at inexpensively producing a host of optimal solutions.

• Industrial Engineering and Management Systems
• /
• v.13 no.1
• /
• pp.29-42
• /
• 2014

Extensive research has been conducted on supplier evaluation and selection as a strategic and crucial component of supply chain management in recent years. However, few articles in the previous literature have been dedicated to the use of fuzzy inference systems as an aid in decision-making. Therefore, this essay attempts to demonstrate the application of this method in evaluating suppliers, based on a comprehensive framework of qualitative and quantitative factors besides the effect of gradual coverage distance. The purpose of this study is to investigate the applicability of the numerous measures and metrics in a multi-objective optimization problem of the supply chain network design with the aim of managing the allocation of orders by coordinating the production lines to satisfy customers' demand. This work presents a dynamic non-linear programming model that examines the important aspects of the strategic planning of the manufacturing in supply chain. The effectiveness of the configured network is illustrated using a sample, following which an exact method is used to solve this multi-objective problem and confirm the validity of the model, and finally the results will be discussed and analyzed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.8
• /
• pp.357-365
• /
• 2014

This paper proposed a multi-objective optimization method for building energy system design using primary energy consumption and initial cost. The designing of building energy systems is a complex task, because life cycle cost and efficiency of building are determined by decisions of engineer during the early stage of design. Therefore, methods such as pareto analysis that can generate various alternatives for decision making are necessary. In this study, the optimization is performed using the NSGAII and case study was carried out for feasibility of the proposed method. As a result, alternative solutions can be obtained for the optimal building energy system design.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.3
• /
• pp.310-320
• /
• 1999

A mixed model assembly line (MMAL) is a special type of production line where a variety of product models similar in product characteristics are assembled. Determining the model sequence is an important problem for the efficient use of MMALs. This paper considers interactive multiobjective decision making problems for MMAL sequencing. Evolution program is employed as an underlying framework. In this study, a way of approximating the linear utility function is first studied. To improve its search efficiency to the solution space preferred by a decision maker, some modifications of a standard evolution program are made: operating several subpopulations instead of a single population and merging two or more subpopulations to a single subpopulation, and using a Pareto pool. Extensive computational experiments are carried out to verify the performance of the proposed approach. The computational results show that our approach is promising in solution quality.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.35-57
• /
• 2014

Multi-criteria decision making (MCDM) algorithms play an important role in ensuring quality of service in an integrated HetNets (Heterogeneous Networks). The primary objective of this paper is to develop a multi-criteria vertical handoff decision algorithm (VHDA) for best access network selection in an integrated Wireless Local Area Network (WLAN)/Universal Mobile Telecommunications System (UMTS)/Worldwide Interoperability for Microwave Access (WiMAX) system. The proposed design consists of two parts, the first part is the evaluation of an Analytic Hierarchy Process (AHP) to decide the relative weights of handoff decision criteria and the second part computes the final score of the weights to rank network alternatives using Simple Additive Weighting (SAW). SAW ranks the network alternatives in a faster and simpler manner than AHP. The AHP-SAW mathematical model has been designed, evaluated and simulated for streaming video type of traffic. For other traffic type, such as conversational, background and interactive, only simulation results have been discussed and presented in brief. Simulation results reveal that the hierarchical modelling and computing provides optimum solution for access network selection in an integrated environment as obtained results prove to be an acceptable solution to what could be expected in real life scenarios.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2003.11a
• /
• pp.239-250
• /
• 2003

In this research, we propose a hybrid group decision support mechanism (H-GDSM) based on Fuzzy AHP (Analytic Hierarchy Process) and FCM (Fuzzy Cognitive Map). The AHP elicits a corresponding priority vector interpreting the preferred information among the decision makers. Corresponding vector was composed of the pairwise comparison values of a set of objects. Since pairwise comparison values are the judgments obtained from an appropriate semantic scale. However, AHP couldn't represent the causal relationship among information, which were used by decision makers. In contrast to AHP, FCM could represent the causal relationship among variables or information. Therefore, FCMs were successfully developed and used in several ill-structured domains, such as strategic decision-making, policy making, and simulations. Nonetheless, many researchers used subjective and voluntary inputs to simulate the FCM. As a result of subjective inputs, it couldn't avoid the rebukes of businessman. To overcome these limitations, we incorporated the Fuzzy membership functions, AHP and FCM into a H-GDSM. In contrast to current AHP methods and FCMs, the H-GDSM method developed herein could concurrently tackle the pairwise comparison involving causal relationships under a group decision-making environment. The strengths and contributions of our mechanism were 1) handling of qualitative knowledge and causal relationships, 2) extraction of objective input value to simulate the FCM, 3) multi-phase group decision support based on H-GDSM. To validate our proposed mechanism we developed a simple prototype system to support negotiation-based decisions in electronic commerce (EC).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.551-563
• /
• 2011

Water resource projects need an enormous national budget. Therefore, a reasonable and reliable decision making is required for the planning of water resource projects, but decision making has been mostly performed by economic analysis. The objective of this study is to develop a Multi-criteria Decision Making(MCDM) model which can assess the project in various aspects for the selection of preferable alternative and determination of investment priority in water resource projects. In this study, the criteria involves economic feasibility, policies, vulnerability, and sub-items which have weights obtained from the expert survey for the consistent evaluation. We also derived the utility function considering risk trend of each item based on the expert survey. Then, the total score was estimated by weights of each item and utility score of each attribute. The results show that vulnerability is a major contributor for the criteria. This study will contribute to the selection of proper water resource projects considering efficiency of project and fairness for vulnerable area.