• 전기학회논문지
• /
• 제56권5호
• /
• pp.892-897
• /
• 2007

This paper presents the output filter design and the output characteristic analysis by cut-off frequency set up of the LCR filter on NPC multi-level inverter with trap-filter. The single-phase NPC three-level inverter operates at low switching frequency. The proposed LC trap filter is comprised of a conventional LCR output filter, by using LC trap filter the need for high damping resistor and low LC cut-off frequency is eliminated. Also. low damping resistor is increased the output filter system. The multilevel inverter system used NPC type inverter in proper system for high power application and controller is used DSP(TMS320C31). The effectiveness of proposed system confirmed the validity through SPICE simulation and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.630-634
• /
• 2003

This paper proposes a Carrier-Rotation PWM technique that is new solution for the voltage unbalancing problem of flying capacitors in the Flying Capacitor Multi-level Inverter (FCMI).The proposed PWM technique equalizes the utilization of phase leg voltage redundancies corresponding to the charging and the discharging state of flying capacitors during one switching period of all the switches. it also has the same switch utilization and the reduced harmonics of output voltage. Hence, it is more suitable for the FCMI compared with the conventional solutions. Experimental results on the laboratory prototype flying capacitor 3-level inverter confirm the validity of the proposed PWM technique.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.33-36
• /
• 2000

Multi-protocol Label Switching is a comparatively new technology based on the association of labels with routes and the use of labels to forward packets. MPLS can be used for transport of any level 3 protocol over any level 2 technology. Differentiated Services define a model for implementing scalable differentiation of QoS in the Internet. The inherent characteristics of MPLS make it a very good candidate for providing Differentiated Services. In this paper we describe various approaches which can be used to support differentiated services in MPLS environments.

• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.547-553
• /
• 1999

본 논문에서는 기존의 12-스텝 인버터에 간단한 보조회로를 추가하여 24-스텝(또는 36-스텝)의 출력파형을 갖는 새로운 방식의 이중접속 멀티스텝 인버터를 제안한다. 제안한 인버터의 보조회로는 두 개의 전압분할용 커패시터, 두 개의 스위칭소자와 저용량의 단권변압기로 구성된다. 이 보조회로의 동작으로 24-스텝의 입·출력 파형을 얻을 수 있으며 한 개의 양방향 스위칭 소자를 추가하면 36-스텝의 파형을 얻게된다. 스위칭 함수를 이용한 전압 및 전류의 분석을 통하여 설계에 필요한 최적의 파라미터를 설정하였다. 제안한 인버터는 PWM방식을 사용할 수 없는 중용량의 SVC등에 적용하면 효과적이다. 본 방식의 타당성을 실험 및 시뮬레이션을 통하여 입증하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.624-631
• /
• 2003

This paper presents a simple carrier symmetric method for the voltage balance of flying capacitors in FCMLI(flying capacitor multi-level inverter). To achieve the voltage balance of flying capacitors, the utilization of each carrier must be balanced during a half-cycle of the switching period such as PSPWM(Phase-Shifted PWM). However, the CRPWM(Carrier Redistribution PWM) method causes the fluctuation of flying capacitor voltages because the balanced utilization of carriers is not achieved. Moreover, it does not consider that the load current change has an influence on flying capacitor voltages by assuming that the current flows into the load. To overcome the drawbacks of CRPWM, it is modified by the technique that carriers of each band are disposed symmetrically at every fundamental period. Firstly, the CRPWM method is reviewed and the theory on voltage balance of flying capacitors is analyzed. The proposed method is introduced and is verified through the experiment result.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.569-583
• /
• 2013

In this study, the simultaneous use of a multi-level converter (MLC) as a DC-motor drive and as an active battery cell balancer is investigated. MLCs allow each battery cell in a battery pack to be independently switched on and off, thereby enabling the potential non-uniform use of battery cells. By exploiting this property and the brake regeneration phases in the drive cycle, MLCs can balance both the state of charge (SoC) and temperature differences between cells, which are two known causes of battery wear, even without reciprocating the coolant flow inside the pack. The optimal control policy (OP) that considers both battery pack temperature and SoC dynamics is studied in detail based on the assumption that information on the state of each cell, the schedule of reciprocating air flow and the future driving profile are perfectly known. Results show that OP provides significant reductions in temperature and in SoC deviations compared with the uniform use of all cells even with uni-directional coolant flow. Thus, reciprocating coolant flow is a redundant function for a MLC-based cell balancer. A specific contribution of this paper is the derivation of a state-space electro-thermal model of a battery submodule for both uni-directional and reciprocating coolant flows under the switching action of MLC, resulting in OP being derived by the solution of a convex optimization problem.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권4호
• /
• pp.1106-1127
• /
• 2012

Service oriented architecture (SOA) lends itself to model the application components to coarse-grained services in such a way that the composition of different services could be feasible. Service composition fulfills numerous service requirements by constructing composite applications with various services. As it is the case in many real-world applications, different users have diverse QoS demands issuing for composite applications. In this paper, we present a service composition framework for a typical service overlay network (SON) considering both multiple QoS constraints and load balancing factors. Moreover, a service selection algorithm based on niching technique and particle swarm optimization (PSO) is proposed for the service composition problem. It supports optimization problems with multiple constraints and objective functions, whether linear or nonlinear. Simulation results show that the proposed algorithm results in an acceptable level of efficiency regarding the service composition objective under different circumstances.

• Journal of Power Electronics
• /
• 제5권1호
• /
• pp.45-54
• /
• 2005

This paper presents an application of SR drives for LSEV's(Low Speed Electric Vehicles) which are used for golf and leisure. Two types of 5[HP] SRM's and its drive system are designed and tested. In order to be energy saving and have effective braking during deceleration, a multi-level inverter is proposed. For the precise switching angle control, a new type of analog encoder is proposed. A current control is adopted for soft starting and an angle control is adopted at high speed to increase efficiency. Drive characteristics and performance are shown with test results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.303-305
• /
• 2003

This paper discusses single-phase AC-DC converter that driven by binary combination at different transformer winding ratio. It has a advantage that constructs a control system simply and obtain load current of good quality without filter circuit and free from noise or isolation for lower switching frequency. Also, this has merit that can do high power capacity. In this research, study on feedback circuit that consist for load stability of AC-DC multi-level converter.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.96-105
• /
• 2015

In recent years, the multilevel converters have been given more attention due to their modularity, reliability, failure management and multi stepped output waveform with less total harmonic distortion. This paper presents a novel symmetric multilevel inverter topology with reduced switching components to generate a high quality stepped sinusoidal voltage waveform. The series and parallel combinations of switches in the proposed topology reduce the total number of conducting switches in each level of output voltages. In addition, a comparison between the proposed topology with another topology from the literature is presented. To verify the proposed topology, the computer based simulation model is developed using MATLAB/Simulink and experimentally with a prototype model results are then compared.