• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.33-39
• /
• 2010

In this paper, a data dissemination protocol that transmits data collected for Wireless Sensor Networks (WSNs) is newly proposed, and the proposed proactive protocol takes into account energy consumption minimized and delay time disseminated. The well-known SPMS (Shortest Path Mined SPIN) forms the shortest path-based routing table obtained by Bellman Ford Algorithm (BFA) and disseminates data using a multi-hop path in order to minimize energy consumption. The mentioned properties of SPMS cause memory burden to create and maintain the routing tables. In addition, whenever BFA is executed, it is necessary to suffer from the energy consumption and traffic occurred. In order to overcome this problem, a proactive dissemination protocol using Residual Energy and Signal Strength, called RESS, is proposed in this paper. Simulation results show that RESS outperforms SPMS up to 84% in terms of the number of traffic messages and the transmitted delay time of RESS is similar to that of SPMS using the shortest path.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.664-674
• /
• 1996

In high speed multi-wavelength networks, retransmission overhead due to desination conflict or control packet collision is one factor of performance degration because signal prpagation delay is much larger than the transmission time of data packet. In this paper, an efficient WDMA protocol with a collision avoidance mechanism is proposed for high speed WDM single-hop network with a passive star topology. In proposed protocol, each node has cource queues and routing table to store souting informatio. This architecture makes is possible to avoid any kind of collision when a node reserves the channel to transmit a data packet. High system thoughput and channel utilization can be achieved by proposed protocol since there are no discarded packets caused by any collision at transmission time. The performance of proposed protocol is evaluated in term of throughput and delay with variations in offered load. Simulation results show that the proposed protocol has superior performance to convertional protocols under nonuniform traffic as well as uniform traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1259-1266
• /
• 2010

M2M communication is considered as a key enabling technology to monitor the status of objects, vehicles, humans through auto-configuring wireless networks. In M2M network, there are active research activities to enhance the reliability on data while being collected from wireless sensor network. The reliability issue becomes more important as wireless sensor networks carry multimedia data, which is delay sensitive. The interference caused by the adjacent neighbor sensor nodes is a major factor in network performance degradation, which becomes more severe in multi-hop routing environment. In this paper, we propose inerfernce-free multipath routing protocol for M2M wireless network for enhancement of packet delay performance. The simulation results show that the proposed routing algorithm outperforms the existing routing protocols in terms of packet delay and throughput.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.49-59
• /
• 2014

Recently, wireless sensor networks(WSNs) are widely used for intrusion detection and ecology, environment, atmosphere, industry, traffic, fire monitoring. In this paper, an energy efficient clustering algorithm is proposed. The proposed algorithm forms clusters uniformly by selecting cluster head that optimally located based on receiving power. Besides, proposed algorithm can induce uniform energy consumption regardless of location of nodes by multi-hop transmission and MST formation with limited maximum depth. Through the above, proposed algorithm elongates network life time, reduces energy consumption of nodes and induces fair energy consumption compared to conventional LEACH and HEED. The results of simulation show that the proposed clustering algorithm elongates network life time through fair energy consumption.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.5744-5764
• /
• 2018

In Wireless Sensor Networks (WSNs) for Internet of Things (IoT) environment, fault tolerance is a most fundamental issue due to strict energy constraint of sensor node. In this paper, a robust energy saving data dissemination protocol for IoT-WSNs is proposed. Minimized energy consumption and dissemination delay time based on signal strength play an important role in our scheme. The representative dissemination protocol SPIN (Sensor Protocols for Information via Negotiation) overcomes overlapped data problem of the classical Flooding scheme. However, SPIN never considers distance between nodes, thus the issue of dissemination energy consumption is becoming more important problem. In order to minimize the energy consumption, the shortest path between sensors should be considered to disseminate the data through the entire IoT-WSNs. SPMS (Shortest Path Mined SPIN) scheme creates routing tables using Bellman Ford method and forwards data through a multi-hop manner to optimize power consumption and delay time. Due to these properties, it is very hard to avoid heavy traffic when routing information is updated. Additionally, a node failure of SPMS would be caused by frequently using some sensors on the shortest path, thus network lifetime might be shortened quickly. In contrast, our scheme is resilient to these failures because it employs energy aware concept. The dissemination delay time of the proposed protocol without a routing table is similar to that of shortest path-based SPMS. In addition, our protocol does not require routing table, which needs a lot of control packets, thus it prevents excessive control message generation. Finally, the proposed scheme outperforms previous schemes in terms of data transmission success ratio, therefore our protocol could be appropriate for IoT-WSNs environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1317-1341
• /
• 2021

Nowadays, the Internet of Things (IoT) is adopted to enable effective and smooth communication among different networks. In some specific application, the Wireless Sensor Networks (WSN) are used in IoT to gather peculiar data without the interaction of human. The WSNs are self-organizing in nature, so it mostly prefer multi-hop data forwarding. Thus to achieve better communication, a cross-layer routing strategy is preferred. In the cross-layer routing strategy, the routing processed through three layers such as transport, data link, and physical layer. Even though effective communication achieved via a cross-layer routing strategy, energy is another constraint in WSN assisted IoT. Cluster-based communication is one of the most used strategies for effectively preserving energy in WSN routing. This paper proposes a Bio-inspired cross-layer routing (BiHCLR) protocol to achieve effective and energy preserving routing in WSN assisted IoT. Initially, the deployed sensor nodes are arranged in the form of a grid as per the grid-based routing strategy. Then to enable energy preservation in BiHCLR, the fuzzy logic approach is executed to select the Cluster Head (CH) for every cell of the grid. Then a hybrid bio-inspired algorithm is used to select the routing path. The hybrid algorithm combines moth search and Salp Swarm optimization techniques. The performance of the proposed BiHCLR is evaluated based on the Quality of Service (QoS) analysis in terms of Packet loss, error bit rate, transmission delay, lifetime of network, buffer occupancy and throughput. Then these performances are validated based on comparison with conventional routing strategies like Fuzzy-rule-based Energy Efficient Clustering and Immune-Inspired Routing (FEEC-IIR), Neuro-Fuzzy- Emperor Penguin Optimization (NF-EPO), Fuzzy Reinforcement Learning-based Data Gathering (FRLDG) and Hierarchical Energy Efficient Data gathering (HEED). Ultimately the performance of the proposed BiHCLR outperforms all other conventional techniques.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.57-70
• /
• 2006

This paper descWireless Sensor Network consisting of a number of small sensors with transceiver and data processor is an effective means for gathering data in a variety of environments. The data collected by each sensor is transmitted to a processing center that use all reported data to estimate characteristics of the environment or detect an event. This process must be designed to conserve the limited energy resources of the sensor since neighboring sensors generally have the data of similar information. Therefore, clustering scheme which sends aggregated information to the processing center may save energy. Existing multi-hop cluster energy consumption modeling scheme can not estimate exact energy consumption of an individual sensor. In this paper, we propose a new cluster energy consumption model which modified existing problem. We can estimate more accurate total energy consumption according to the number of clusterheads by using Voronoi tessellation. Thus, we can realize an energy efficient cluster formation. Our modeling has an accuracy over $90\%$ when compared with simulation and has considerably superior than existing modeling scheme about $60\%.$ We also confirmed that energy consumption of the proposed modeling scheme is more accurate when the sensor density is increased.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.79-85
• /
• 2016

Recently, visible light communication(VLC) is being actively researched as green wireless communication services are drawing attention. Currently, VLC mostly uses LED for transmission and PD(Photo Diode) for receiving. However, this kind of system has limited applications. Therefore, we design and propose in this paper, a LED-to-LED two way VLC system that doesn't use PD(Photo Diode). This system has the following features and contributions. First, this system uses just LED at both transmitter and receiver with analog switch, Second, this system support both one-way communication and two way communication together. One way communication can support multi-hop communication. The performance evaluation of the proposed system is conducted at a place with standard light. We test the success or failure of one way communication by changing distance and baud rate while test the success and failure of two way communication by changing distance. We expect that the proposed LED-to-LED system in this paper can be applied for various application fields.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.105-111
• /
• 2009

The study aims to propose the intelligent clustering technique that calculates the distance by improving the problems of multi-hop clustering technique for inter-vehicular secure communications. After calculating the distance between vehicles with no connection for rapid transit and clustering it, the connection between nodes is created through a set distance vale. Header is selected by the distance value between nodes that become the identical members, and the information within a group is transmitted to the member nodes. After selecting the header, when the header is separated due to its mobility, the urgent situation may occur. At this time, the information transfer is prepared to select the new cluster header and transmit it through using the intelligent cluster provided from node by the execution of programs included in packet. The study proposes the cluster technique of the intelligent distance estimation for the mobile Ad-hoc network that calculates the cluster with the Store-Compute-Forward method that adds computing ability to the existing Store-and-Forward routing scheme. The cluster technique of intelligent distance estimation for the mobile Ad-hoc network suggested in the study is the active and intelligent multi-hop cluster routing protocol to make secure communications.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.2
• /
• pp.223-234
• /
• 2008

Mobile multi-hop relaying (MMR) technology is being considered as a promising solution capable to enhance coverage, user throughput, and system capacity of the current wired backbone dependent wireless access networks. Since the relaying nodes do not need a wired backbone access, MMR technology offers easy and low-cost deployment, flexible cell planning, and adaptive traffic handling performance. In this paper, we investigate performance and cost effectiveness of the MMR technology deployment in the IEEE802.16j based WiBro/WiMAX systems. We first introduce standardization activities and research issues of MMR WiBro/ WiMAX systems. Since the coverage extension problem may occur in metropolitan areas as well as suburban or rural areas where user density is relatively low or moderate, we introduce several MMR topologies and analyze cost-effectiveness of MMR based coverage extension with respect to the user traffic density. Then, we argue cost effect on MMR technology deployment and throughput performance, Finally, we introduce further study issues including sectorized base station based MMR deployment approaches and the single and multi-frame structure MMR approaches.