• 동력기계공학회지
• /
• 제13권6호
• /
• pp.63-69
• /
• 2009

The experiment was performed to check operating characteristics of fouling auto removal apparatus for multi pass type heat exchanger using ejector. The results showed as following. The ejector suction flow rate increased with the head of operating pump of ejector. Proper suction flow rate showed $7.2{\sim}10.2m^3/h$ for ball collection in case of pump head 35~50m. The head of ejector outlet pipe is below 4.1m in case of 40m, the head of operating pump of ejector to confirm ejector suction flow rate 8.4m3/h. Lattice space of ball separator is allowed 6~10.3mm in ranges of ball diameter are 15~25mm and when mass flow of cooling water is 3.0m/sec. Average of passing time of balls is 1.2~2.8sec depend on the velocity of flow and the size of balls.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.609-614
• /
• 2008

The heating and cooling performance of system multi-air conditioner under high-head and long-line conditions are experimentally investigated. The maximum head and tube length were 110 m and 1000 m, respectively. The experimental system was composed of 4 outdoor units with module systems, and 13 indoor units which were joined with the mode change unit by single-tube circuit. Field tests without indoor and outdoor temperature control were performed in a general office building with 22 different working conditions. Experimental results were prepared on the p-h diagram. Also the oil level in the compressor was normally maintained at the safety zone for the system multi-air conditioner with high-head and long-line conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.589-592
• /
• 2002

A commercial CFD code is applied to analyze the 3-D viscous flow field within vertical multi-stage centrifugal pump including impeller of centrifugal pump with 6 blades and guide vain with 11 blades. The numerical analysis of vertical multi-stage centrifugal pump is performed by changing flow rate from $8\;to\;26\;m^{3}/h$ at the constant 3500rpm. The characteristics such as total pressure coefficient, total head, water horse power, power efficiency are represented according to flow rate changing. In the future, we will need to perform flow calculation of vertical multi-stage centrifugal pump by considering meridional shape of impeller.

• International Journal of Human Ecology
• /
• 제7권1호
• /
• pp.77-83
• /
• 2006

The ability to customize garments for fit in the apparel industry is directly tied to the availability of comprehensive and accurate sets of anthropometrical data for each consumer. The data for apparel sizing systems is available from three major standard/ research organizations: ASTM (American Society for Testing and Materials), ISO (International Standard Organization), and NCHS (National Center for Health Statistics). However, these standards ignore various head shapes and are outdated for the development future head products. This creates a data gap an ever changing multi-cultural society such as the United Sates. Although major government and industry safety organizations recognize the importance of safety for head products, few studies were found to support their reasoning. The purpose of this study is to provide accurate head dimension data for developing safety head products by analyzing various head shapes in the United Sates which includes various ethnic backgrounds. This study was carried out on 105 males in the United States. Factor analysis, cluster analysis, Moreover, Duncan analysis were all used for analyzing various head shapes.

• ETRI Journal
• /
• 제29권4호
• /
• pp.411-420
• /
• 2007

The steady evolution of mapping technology is leading to an increasing availability of multi-sensory geo-spatial datasets, such as data acquired by single-head frame cameras, multi-head frame cameras, line cameras, and light detection and ranging systems, at a reasonable cost. The complementary nature of the data collected by these systems makes their integration to obtain a complete description of the object space. However, such integration is only possible after accurate co-registration of the collected data to a common reference frame. The registration can be carried out reliably through a triangulation procedure which considers the characteristics of the involved data. This paper introduces algorithms for a multi-primitive and multi-sensory triangulation environment, which is geared towards taking advantage of the complementary characteristics of spatial data available from the above mentioned sensors. The triangulation procedure ensures the alignment of involved data to a common reference frame. The devised methodologies are tested and proven efficient through experiments using real multi-sensory data.

• 한국음향학회지
• /
• 제24권2호
• /
• pp.68-77
• /
• 2005

입체음향 시스템의 목적은 청취자에게 음원을 획득한 장소에 있는 것과 같은 느낌을 주는 것이다. 이를 위해 일반적으로 더미헤드가 많이 사용되고 있다. 인간의 머리형태를 한 더미헤드의 특성 때문에 더미헤드를 통해 획득한 음원을 헤드폰을 통해 청취하는 경우 현장감을 느낄 수 있다. 하지만 더미헤드의 형태 및 크기는 공공장소에서 사용하기에는 제약이 있고 더미헤드를 통해 획득한 신호는 멀티채널로 확장하기가 어렵기 때문에 본 논문에서는 이러한 더미헤드를 구체로 간략화 한 후 구체 위에 다수 개의 마이크를 배치하여 입체음원을 획득하기 위한 멀티채널 3차원 마이크 기술에 대해 제안한다. 본 논문에서 제안하는 멀티채널 3차원 마이크는 구체 위의 수평면 상에 5개의 마이크를 배치하여 입체 음원을 획득한 다음 후처리 과정을 통해 헤드폰, 스테레오, 스테레오 다이폴, 4채널 및 5채널 재생환경 등에서 재생이 가능하다. 다양한 재생신호의 생성을 위한 후처리 과정은 많은 연산량을 필요로 하기 때문에, H/W로 제작하였다. 멀티채널 3차원 마이크의 성능을 검증하기 위해 방향성 실험을 수행한 결과, 멀티채널 재생환경에서 더미헤드 기술의 단점인 전/후방 혼동현상을 현저하게 줄일 수 있었다.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.20-25
• /
• 2012

A Crankshaft multi grinding machine is developed for manufacturing of high precision crankshaft. The grinding head part of the developed machine should be moved precisely during grinding of work materials. In this paper, structural and modal analysis for the crankshaft multi grinding machine is carried out to check the design criteria of the machine. The analysis is carried out by FEM simulation using the commercial software. The machine is modeled by placing proper shell and solid finite elements. The results of structural and modal analysis confirmed that the structural characteristics of grinding machine and the structural safety are considered secure.

• 한국정밀공학회지
• /
• 제30권11호
• /
• pp.1147-1151
• /
• 2013

A Crankshaft Multi Grinding Machine is developed for manufacturing of high precision crankshaft. The grinding head part of the developed machine should be moved precisely during grinding of work materials. In this paper, structural and modal analysis for the crankshaft multi grinding machine is carried out to check the design criteria of the machine.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권6호
• /
• pp.1833-1848
• /
• 2022

Named entity recognition (NER) is an important basic task in the field of Natural Language Processing (NLP). Recently deep learning approaches by extracting word segmentation or character features have been proved to be effective for Chinese Named Entity Recognition (CNER). However, since this method of extracting features only focuses on extracting some of the features, it lacks textual information mining from multiple perspectives and dimensions, resulting in the model not being able to fully capture semantic features. To tackle this problem, we propose a novel Multi-view Semantic Feature Fusion Model (MSFM). The proposed model mainly consists of two core components, that is, Multi-view Semantic Feature Fusion Embedding Module (MFEM) and Multi-head Self-Attention Mechanism Module (MSAM). Specifically, the MFEM extracts character features, word boundary features, radical features, and pinyin features of Chinese characters. The acquired font shape, font sound, and font meaning features are fused to enhance the semantic information of Chinese characters with different granularities. Moreover, the MSAM is used to capture the dependencies between characters in a multi-dimensional subspace to better understand the semantic features of the context. Extensive experimental results on four benchmark datasets show that our method improves the overall performance of the CNER model.

• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.109-114
• /
• 2006

Half-beads of multi-layer-steel cylinder head gaskets take charge of sealing of lubrication oil and coolant between the cylinder head and the block. Since the head lifts off periodically due to the combustion gas pressure, both the dynamic sealing performance and the fatigue durability are essential for the gasket. A finite element model of the halfbead has been developed and verified with experimental data. The half-bead forming process was included in the model to consider the residual stress effects. The model is employed to assess the dependence of the sealing performance and the fatigue durability on the design parameters of half-bead such as the width and height of bead and the flat region length. The assessment results show that the sealing performance can be enhanced without significant deterioration of the fatigue durability in a certain range of the half-bead width. In the other cases the improvement of sealing performance is accompanied by the loss of the fatigue durability. Among three parameters, the bead width has the strongest influence.