• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.68-78
• /
• 2012

A layout of an LNG FPSO should be elaborately determined as compared with that of an onshore plant because many topside process systems are installed on the limited area; the deck of the LNG FPSO. Especially, the layout should be made as multi-deck, not single-deck and have a minimum area. In this study, a multi-floor layout for the liquefaction process, the dual mixed refrigerant(DMR) cycle, of LNG FPSO was determined by using the optimization technique. For this, an optimization problem for the multi-floor layout was mathematically formulated. The problem consists of 589 design variables representing the positions of topside process systems, 125 equality constraints and 2,315 inequality constraints representing limitations on the layout of them, and an objective function representing the total layout cost. To solve the problem, a hybrid optimization method that consists of the genetic algorithm(GA) and sequential quadratic programming(SQP) was used in this study. As a result, we can obtain a multi-floor layout for the liquefaction process of the LNG FPSO which satisfies all constraints related to limitations on the layout.

• Korean Chemical Engineering Research
• /
• 제52권4호
• /
• pp.475-480
• /
• 2014

플랜트 배치 최적화 문제의 목적은 장치를 연결하는 파이프의 길이를 최소화 하는데 있다. 하지만, 기존 연구들은 대체적으로 단일 층의 배치 문제를 다루고 있으며, 또한 장치 간 유지 보수에 필요한 최소 공간 확보, 사고 예방을 위한 장치 간 이격 거리등 안전 요소를 간과해 왔다. 본 연구에서는 장치 간 유지 보수에 필요한 최소 거리 확보 및 안전 이격 거리를 고려하여 플랜트 배치 문제를 MILP(Mixed Integer Linear Programming) 형태의 문제로 정의하였다. 본 문제의 목적함수는 장치 간 연결하는 파이프 비용이며 제약조건은 안전을 위한 장치 간 최소 이격 거리, 유지 보수에 필요한 공간으로 설정하였다. 하지만, 공정 특성에 따라 필요한 공간 및 작업자의 통행 등 다양한 제약조건을 수반하게 된다. 이에 따라 플랜트 배치 문제를 일반적인 수학식으로 표현하는 데 많은 제약이 있으며, 따라서 함수의 미분식을 이용하는 기존 최적화 방법론을 이용하여 문제를 해결하는 데 많은 어려움이 있다. 본 연구에서는 함수의 미분식을 적용하지 않고 이용이 가능한 경험적 최적화 기법 중 하나인 PSO(Particle Swarm Optimization)를 이용하여 최적화를 수행하였다. 본 연구에서 개발한 모델의 검증을 위해 Ethylene Oxide 공정을 2층으로 배치하는 최적화를 수행하였다.

• 대한조선학회논문집
• /
• 제52권1호
• /
• pp.77-87
• /
• 2015

For a floating offshore plant such as FPSO(Floating, Production, Storage, and Off-loading unit), various equipment should be installed in the restricted space, as compared with an onshore plant. The requirement for an optimal layout method of the plant has been increased in these days. Thus, a layout method of the floating offshore plant was proposed in this study. For this, an optimization problem for layout design was mathematically formulated, and then an optimization algorithm based on the genetic algorithm was implemented with C++ language in order to solve it. Finally, the proposed method was applied to an example of FPSO topsides. As a result, it was shown that the proposed method can be applied to layout design of the floating offshore plant such as FPSO.

• 산업경영시스템학회지
• /
• 제26권4호
• /
• pp.42-49
• /
• 2003

The branch and bound techniques based on cut tree and eigenvector have been Introduced in the literature [1, 2, 3, 6, 9, 12]. These techniques are used as a basis to allocate departments to floors and then to fit departments with unchangeable dimensions into floors. Grouping algorithms to allocate departments to each floor are developed and branch and bound forms the basis of optimizing using the criteria of rectilinear distance. The proposed branch and bound technique, in theory, will provide the optimal solution on two dimensional layout. If the runs are time and/or node limited, the proposed method is a strong heuristic The technique is made further practical by the fact that the solution is constrained such that the rectangular shape dimensions length and width are fixed and a perfect fit is generated if a fit is possible. Computational results obtained by cut tree-based algorithm and eigenvector-based algorithm are shown when the number of floors are two or three and there is an elevator.

• 한국농촌건축학회논문집
• /
• 제6권2호
• /
• pp.1-10
• /
• 2004

The purpose of this study is to clarify the actual condition of the layout and floor planning of elementary schools for the 7th education curriculum. This article discuses about the basic characteristics of the plan composition and the outdoor spaces of 35 elementary schools in Gyeongnam prefecture. The results of this study are summarized as follows; 1) To respond to the 7th educational curriculum, unit classrooms need to be expanded or space for a multi-purpose room needs to be secured to serve the following purposes: the operation of educational program by the level and offering of unified Subjects. overall, elementary schools need to seek ways to deal with problems associated with space composition, types of classrooms, and changes in the number of classrooms so that the 7th Educational curriculum can be carried out smoothly. 2) Different from the past, various plan types are available nowadays. Even in case of schools with the same class size, their areas were different by 130 percentages or higher. Therefore, practicality needs to be more focused than facility standards in order for the school to cope with changes in future educational environment. 3) When designing the elementary school in the future, more space needs to be assigned for learning by expanding facilities - special purpose classrooms and supporting facilities - to accommodate students' various learning activities. In addition, faculty facilities need to be rearranged to promote research and development as well as to ensure the operation of the educational program. And, resident facilities that consider the close connection with the local community need to be rearranged in an efficient manner as well.

• 한국해양공학회지
• /
• 제28권5호
• /
• pp.404-410
• /
• 2014

The purpose of this study was to find the optimal arrangement of FPSO equipment in a module while considering the economic value and fire risk. We estimated the economic value using the pipe connections and pump installation cost in an HP (high pressure) gas compression module. The equipment risks were also analyzed using fire scenarios based on historical data. To consider the wind effect during a fire accident, fuzzy modeling was applied to improve the accuracy of the analysis. The objective functions consisted of the economic value and fire risk, and the constraints were the equipment maintenance and weight balance of the module. We generated a Pareto-optimal front group using a multi-objective GA (genetic algorithm) and suggested an equipment arrangement method that included the opinions of the designer.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1764-1769
• /
• 2014

본 논문에서는 기존의 단일대형강관 타워의 일부를 복수의 강관으로 대체한 멀티기둥-단일대형강관 하이브리드형식 풍력타워의 적용성을 평가하기 위하여 연결부의 성능을 수치해석적으로 평가하였다. 연결부의 형태는 멀티기둥의 단일대형강관 단부 관통 여부, 멀티기둥 하단부 날개 보강재의 유무 및 단일대형강관 내부 가로보 배치형식으로 구분하였다. 해석은 응력집중을 평가하기 위한 선형탄성해석과 극한강도을 평가하기 위한 재료 및 기하비선형 해석이 수행되었다. 수직력과 수평력에 대한 구조성능 분석 결과, 가로보 배치형식과 날개 보강재는 타워 구조계의 극한강도에 민감하게 영향을 주는 것으로 확인되었다.

• 건축역사연구
• /
• 제7권3호
• /
• pp.53-66
• /
• 1998

In the meantime, the study of traditional and contemporary house had been produced so many achievements in korea, but modern house is yet to be solved, Accordingly, It is necessary to develop and present the basic research data in order to build up an objective study for urban house in the modern age(1910-1945), Following to a study on the foreigner's house in grid-type settlement of Open Ports, in this research is to investigate and analyze modern houses of urban areas in korean inland, and then clarify types and changes of them. In the first year($1995{\sim}96$), the modern houses of Central Inland Districts(arrounding river Kumgang)-Kunsan kanggyong Puyo Kongju Pugang Chongju were investigated by the layout of room, the construction and materials, the design and style, etc. In the second year($1996{\sim}97$), the modern houses of Open Market(開市場)-Seoul Taegu Kwangju Taejon Chonju were conducted to investigate as above. The traditional house transformed by differentiation and addition of room(kan), the various types were respectively adopted for the korean reforming and western cultural house. In the layout of room, the types of plan were gradually concentrated from the single wings of korean traditional house. The korean traditional house was later improved through the introduction of entrance, corridor, and internal toilet/bathroom. But the korean under-floor heating system(andal) and a series of three rooms had been entirely maintained, composed of master bedroom/living room(daechung)/room. And the traditional town house with shop and storage, being built closely to each other and walled up both sides, it had taken gradually the extensive characteristics in itself. By the displacement of shop/dwelling/ storage. the various types were respectively adopted for the separated, multi-storied, and complex type. The type of them was gradually changed to the narrow and linear form. And so with the stockpile of fundamental datas about modern houses in korean urban areas, we expect these results contribute to the knowledge of the spatial characteristics of urban house at present which are required to the understanding of transition as well as types.

• 한국실내디자인학회논문집
• /
• 제17호
• /
• pp.65-72
• /
• 1998

This study intends to analyze the various spatial structures and characteristics of the museum based on the two of the Renzo Piano's recent projects Menil Collection '||'&'||' Museum and Beyeler Foundation Museum Which defined the direction of the "Third Generation" in museum architecture with reference to the quality of spatial experience and design applications. Comparison and analysis were done on the basic spatial organization floor layout accessibility exhibition area lighting plan and circulation between the two museum. Through the itemized common characteristics of the museum the architect's proposal on meaning and direction of the new museum architecture can be viewed. The contemporary museums distinguish themselves quite clearly from their predecessors and this applies both to their own form and to their spatial organization. As the public demands and requests toward the museum building facility expand everyday the architect must respond by providing multiple types of space where people can experience different atmosphere in each area. One concept he used to create multi experienced area was manipulation of the natural light using by the state-of-the-art techniques of the light filtering system and multi-layering roof system to protect the valuable collections against the direct sunlight. But mainly it was to prove his strong belief in "architecture of light" by creating space with minimized meaning by purposely distinguished area in order to provide maximum support to the physical value of the collection " The connection with nature" is another concept which Piano used to provide the public a tranquil experience through out the architecture which engages in a lively dialogue with art. In spatial organization Piano concerned on functionality which not only concentrated on the visitor's point of view but also on the museum staff's comfort. Unlkie the traditional museum he alternates various size of exhibition areas for spatial hierarchy. Specially the spatial flexibility that the temporary exhibition areas are able to be expanded to the permanent exhibition areas by adjoining t재 spaces differentiate Piano's new museum from the rest. museum from the rest.