$SrAl_2O_4$: $Eu^{2+}$ and $Dy^{3+}$ phosphorescent phosphors were synthesized using the polymerized complex method. Generally, phosphorescent phosphors synthesized by conventional solid state reaction show a micro-sized particle diameter; thus, this process is restricted to applications such as phosphorescent ink and paint. However, it is possible to synthesize homogeneous multi-component powders with fine particle diameter by wet process such as the polymerized complex method. The characteristics of $SrAl_2O_4$: $Eu^{2+}$ and $Dy^{3+}$ powders prepared by polymerized complex method with one and two step calcination processes were comparatively analyzed. Temperatures of organic material removal and crystallization were observed through TG-DTA analysis. The crystalline phase and crystallite size of the $SrAl_2O_4$: $Eu^{2+}$ and $Dy^{3+}$ phosphorescent phosphors were analyzed by XRD. Microstructures and afterglow characteristics of the $SrAl_2O_4$: $Eu^{2+}$ and $Dy^{3+}$ phosphors were measured by SEM and spectrofluorometry, respectively.
A deep-sea manganese nodule miner consists of 4 parts: the pickup device, crusher, disposal device, and tracked vehicle. The tracked vehicle is an essential component to keep the self-propelled miner moving across deep-sea soil. The performances of the tracked vehicle are influenced by noise factors: the shear strength of the seafloor, bottom current, seafloor slope, track speed, reaction forces of flexible hose, etc. It is necessary to adopt a robust design method that improves the performances and minimizes the variation caused by noise factors. Taguchi's method, the most widely known robust design method, searches for the robust optimum using an orthogonal array composed of the product of the inner array and outer array. In this paper, we propose a new screening technique to reduce the number of input factors and apply the MRSN (Multi-Response Signal to Noise) ratio to convert multiple performances into single one in order to overcome the difficulties and limitations of using Taguchi's method in a case with many input factors and multiple performances. A test miner was already designed and tested. It has about 1/10 the capacity of a commercial one and was successfully operated at an in-shore area. Taguchi's robust design was applied to the tracked vehicle of the test miner, and design improvements were implemented for the vehicle.
광포만 집수유역에 분포된 점토광상들은 회장암질 암체에 제한되어 산출된다. 광체의 최상부에서는 로몬타이트와 메타-할로이사이트가 가장 우세하게 발달되고 철산화물이 수반되며, 하부에서는 녹니석과 할로이사이트가 우세하게 산출된다. 주점토층 아래에 놓인 일부 회장암질 암류는 열수맥을 따라 석영, 견운모, 녹니석, 황철석 및 몬모릴로나이트 등으로 실하게 변질되어 있다. 연수와 강우를 각각 $100^{\circ}C$와 $25^{\circ}C$에서 회장암질암과 반응시킨 다성분 평형 반응계산에 의해 열수변질과 풍화변질 기원의 가설들을 시험해본 결과 강우와의 반응결과가 야외에서 산출되는 점토광물군과 보다 유사함을 보인다. 이는 본역 점토광상의 주성인이 풍화변질작용임을 나타낸다.
In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.
본 연구는 제강슬래그로부터 인성분을 추출하여 농업용 비료의 자원으로서 사용하기 위한 침출공정을 연구하였다. 일반적으로 제강 슬래그에 함유되어 있는 인성분은 $C_2S-C_3P$상에 고용되어 있고, 이 고용체는 슬래그 내의 free-CaO 다음으로, 다른 상들보다 수용해성이 크다. 본 실험에서는 다원계 슬래그를 이용하여, 다양한 원소들의 용해거동에 미치는 pH의 영향을 알아보았다. 낮은 pH에서 제강슬래그로부터 수용액 중 Ca, Si, P, Fe의 농도는 증가되었다. pH가 3인 경우, 수용액 중 P 이온의 농도는 시간에 따라 감소하였고, P이온과 Fe이온과의 침전 반응을 감소 원인으로 고찰하였다.
본 연구에서는 식품의 곰팡이 초기오염 검출에 사용할 수 있는 ergosterol 분석용 바이오센서를 개발하고자 $MWNT-NH_2$ 유리탄소전극을 제작하고, cholesterol oxidase의 고정화를 통해 효소반응기를 제작하여, 바이오센서의 전기 화학적 ergosterol 검출장치를 구성하였다. FT-IR을 통해 MWNT에 기능기가 잘 도입되었음을 확인하였고, cholesterol oxidase 효소 고정화 시 coupling efficiency는 99% 이었다. 제작한 $MWNT-NH_2$ 유리탄소전극의 $H_2O_2$ 용액에 대한 농도별 전류를 분석한 결과 $1{\times}10^{-5}{\sim}8{\times}10^{-5}$ M 농도에서 우수한 선형관계를 나타내었고 검출한계는 $10^{-7}$ M이었다. 본 연구에서 제작한 ergosterol 센서를 이용하여 ergosterol에 대한 반응을 측정한 결과 $1.0{\times}10^{-6}{\sim}1.0{\times}10^{-5}$ M의 농도에서 좋은 선형관계를 나타내어 고감도로 ergosterol을 정량할 수 있는 것으로 확인되어 식품의 곰팡이 오염을 확인하는데 유용하게 사용될 수 있을 것으로 보인다.
최근들어 내구성에 대한 사회적, 공학적 중요성이 부각됨에 따라, 염해 및 탄산화에 대한 연구가 집중되고 있다. 일반적으로 침지된 구조물의 경우를 제외하고는 염해와 탄산화는 동시에 발생하게 되는데, 탄산화 영역에서는 염화물 거동이 일반콘크리트에서의 염화물 거동과 다르게 평가된다. 그리고 콘크리트 구조에 발생된 균열은 단일열화 뿐 아니라 복합열화의 진전에도 큰 영향을 미치게 된다. 본 연구의 목적은 염화물 확산과 침투 그리고 이산화탄소 유입에 따른 탄산화 거동을 고려하여, 복합열화에 노출된 건전부 및 균열부 콘크리트 구조물의 열화 해석을 수행하는데 있다. 먼저 초기재령 콘크리트의 다상 수화 발열 모델 및 공극 구조 형성 모델을 도입한 염화물 확산 및 침투를 고려한 염화물 이동 모델을 이용하였다. 이후 탄산화 해석을 통하여 탄산화 영역 진전에 따라 변화하는 공극 분포, 포화도 및 고정화 염화물의 해리를 모델링하여 복합 열화 모델을 개발하였으며 개발된 모델은 기존의 실태 조사 결과 및 실험 결과와 비교하여 그 적용성을 검증하였다. 한편 선행된 연구 결과인 균열부의 염화물 및 탄산화 거동을 고려하여, 보통포틀랜트시멘트 (OPC; ordinary portland cement) 및 혼화재 (슬래그)를 사용한 콘크리트에 대한 복합열화 거동을 시뮬레이션 하였다. 그 결과 건전부 및 균열부에 대하여 복합열화 저항성을 평가할 수 있는 복합열화 천이 영역 (CCTZ)를 제안하였으며, 혼화재를 사용한 콘크리트가 OPC를 사용한 콘크리트에 비하여 복합열화 저항성이 우수함을 해석적으로 구명하였다.
Tumor necrosis factor-$\alpha$ (TNF-$\alpha$) and lymphotoxin-$\alpha$ (LT-$\alpha$, TNF-$\beta$) can initiate and perpetuate human diseases such as multiple sclerosis (MS), rheumatoid arthritis (RA), and insulin-dependent diabetes mellitus (IDDM). TNFs can be blocked by the use of soluble TNF receptors. However, since monomeric soluble receptors generally exhibit low affinity or function as agonists, the use of monomeric soluble receptors has been limited in the case of cytokines such as TNF-$\alpha$, TNF-$\alpha$, interleukin (IL)-1, IL-4, IL-6, and IL-13, which have adapted to a multi component receptor system. For these reasons, very high-affinity inhibitors were created for the purpose of a TNFs antagonist to bind the TNFR and trigger cellular signal by using the multistep polymerase chain reaction method. First, recombinant simple TNFR-Ig fusion proteins were constructed from the cDNA sequences encoding the extracellular domain of the human p55 TNFR (CD120a) and the human p75 TNFR (CD120b), which were linked to hinge and constant regions of human $IgG_1$ heavy chain, respectively using complementary primers (CP) encoding the complementary sequences. Then, concatameric TNFR-Ig fusion proteins were constructed using recombinant PCR and a complementary primer base of recombinant simple TNFR-Ig fusion proteins. For high level expression of recombinant fusion proteins, Chinese hamster ovary (CHO) cells were used with a retroviral expression system. The transfected cells produced the simple concatameric TNFR-Ig fusion proteins capable of binding TNF and inactivating it. These soluble versions of simple concantameric TNFR-Ig fusion proteins gave rise to multiple forms such as simple dimers and concatameric homodimers. Simple TNFR-1g fusion proteins were shown to have much more reduced TNF inhibitory activity than concatameric TNFR-Ig fusion proteins. Concatameric TNFR-Ig fusion proteins showed higher affinity than simple TNFR-Ig fusion proteins in a receptor inhibitor binding assay (RIBA). Additionally, concatameric TNFR-Ig fusion proteins were shown to have a progressive effect as a TNF inhibitor compared to the simple TNFR-Ig fusion proteins and conventional TNFR-Fc in cytotoxicity assays, and showed the same results for collagen induced arthritis (CIA) in mice in vivo.
A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.
연구배경: Rifampicin(RFP)은 항결핵 단기지료의 근간이 되는 약제로서 RFP에 대한 내성을 다제약제내성의 지표로 보기도 한다. rpoB유전자는 RFP이 결합하여 약리작용을 나타내는 RNA poly-merase의 ${\beta}$-subunit을 coding하는 유전자이다. 다른 보고들에 의하면 RFP내성균주에서 rpoB유전자의 돌연변이가 관찰되고 특히 점돌연변이가 중요한 기전임이 알려지고 있다. 이에 저자는 rpoB유전자의 점돌연변이를 쉰게 관찰할 수 있는 PCR-SSCP법 을 이용하여 신속하게 RFP에 대한 내성여부를 확인할 수 있는지에 대하여 알아보았다. 방법: 전통적인 약제내성검사상 RFP에 내성을 보이는 25 배양균주와 RFP에 감수성인 27 배양균주 그리고 표준균주인 H37Rv를 대상으로 하였다. TR8, TR9 primer를 이용하여 rpoB 유전자의 511 codon에서 533 codon 부위를 포함하는 157bp의 DNA를 증폭한 후 폴리 아크릴아마이드젤 전기영동으로 PCR-SSCP를 시행하여 band의 이동양상을 비교하였다. 그리고 H37Rv 와 다른 band의 양상을 보인 균주에서 direct sequencing을 시행하여 H37Rv의 염기서열과 비교하였다. 또한 임상결과를 추적할 수 있었던 19예에서 임상결과와 전통적인 감수성검사 결과, 그리고 PCR-SSCP결과를 비교하였다. 결과: 1) PCR-SSCP결과로 RFP감수성 27균주 모두에서 H37Rv와 동일한 band의 양상을 보였고, RFP내성 25균주 모두에서 H37Rv와 다른 band의 양상을 보여서 전통적인 RFP 감수성검사와 rpoB유전자의 PCR-SSCP 사이에 100% 일치하는 결과를 보여주었다. 2) rpoB 유전자 돌연변이의 주된 기전은 점돌연변이였다. 3) rpoB 유전자의 PCR-SSCP 결과는 전통적인 RFP감수성검사나 항결핵치료의 임상경과와 잘 일치하였다. 결론: 결핵균 rpoB 유전자의 PCR-SSCP에 의한 돌연변이의 확인은 RFP내성 결핵균의 신속한 진단에 아주 유용한 검사로 기대된다. 향후 직접임상검체를 대상으로 한 연구가 필요하리라 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.