• 전력전자학회논문지
• /
• 제19권6호
• /
• pp.564-571
• /
• 2014

A single-stage current-balancing multi-channel light-emitting diode (LED) driver is proposed in this study. The conventional LED driver system consists of two cascaded power conversion stages, i.e., an isolation DC/DC converter and LED driver. LED driver is usually implemented with the same number of expensive boost converters as those of LED channels to tightly control the current through each LED channel. Therefore, its overall system size is not only bulky, but the cost is rather high. By contrast, the proposed LED driver system is composed of a single power stage with the DC/DC converter and LED driver merged. Although the current balancing circuit of the proposed LED driver requires only passive devices instead of expensive boost converters, all currents through multi-channel LEDs can be well balanced. Therefore, the proposed LED driver features a small system size, improved efficiency, and low cost. To confirm the validity of the proposed driver, its operation and performance are verified on a prototype for a 46" LED TV.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.319-326
• /
• 2015

In this paper, a cost-effective single switch multi-channel LED (light emitting diode) driver is proposed. While conventional LED drivers require as many non-isolated DC/DC converters as the number of LED channels, the proposed LED driver needs only one power switch and several balancing capacitors instead of expensive non-isolated DC/DC converters. Therefore, the proposed driver features a simpler structure, with a lower cost and a higher efficiency. Because its power switch can be turned off under the zero current switching condition, it has very desirable advantages such as improved electromagnetic interference characteristics and high efficiency. Moreover, it uses only a small number of DC blocking capacitors with no additional active devices for the current balancing of multi-channel LEDs. As a result, the proposed driver exhibits high reliability and is cost effective. To confirm the validity of the proposed driver, a theoretical analysis is performed, and design considerations and experimental results obtained from a prototype that is applicable to a 46" LED-TV are presented.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1593-1599
• /
• 2017

This paper presents a multi-channel light-emitting diode (LED) driver IC with a current-mode current regulator. The proposed current regulator replaces resistors for current sensing with a sequentially controlled single current sensor and a single regulation loop for sensing and regulating all LED channel currents. This minimizes the current mismatch among the LED channels and increases voltage headroom or, equivalently, power efficiency. The proposed LED driver IC was fabricated in a $0.35-{\mu}m$ BCD 60-V high voltage process, and the chip area is $1.06mm^2$. The measured maximum power efficiency is 93.4 % from a 12-V input, and the inter-channel current error is smaller than as low as ${\pm}1.3%$ in overall operating region.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.351-356
• /
• 2010

A new current-balancing multi-channel LED driver is proposed in this paper. The conventional LED driver system consists of three cascaded power conversion stages and its driver stage has the same number of expensive boost converters as those of the LED channels. On the other hand, the proposed LED driver system consists of two cascaded power stages and its driver stage requires only passive devices instead of expensive boost converters. Nevertheless, all of the currents through multi-channel LEDs can be well balanced. Therefore, it features a smaller system size, improved efficiency, and lower cost. To confirm the validity of the proposed driver, its operation and performance are verified on a prototype for a 46" LCD TV.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.320-327
• /
• 2016

We propose a multi-channel current-balancing single switch light-emitting diode (LED) driver for a 3D TV. Conventional LED drivers require non-isolated DC/DC converters as many as the number of LED channels, whereas the proposed LED driver needs only one power switch and several balancing capacitors instead of expensive non-isolated DC/DC converters. Therefore, the proposed driver features a simple structure with low cost and high efficiency. In particular, because its power switch can be turned off under the zero-current switching condition, the proposed driver has desirable advantages, such as improved electromagnetic interference characteristics and high efficiency. Moreover, it only uses a small number of DC blocking capacitors with no additional active devices for the current balancing of multi-channel LEDs. Therefore, the proposed driver exhibits high reliability and cost effectiveness. To confirm the validity of the proposed driver, we perform a theoretical analysis and present design considerations and experimental results obtained from a prototype that is applicable to a 46" LED TV.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.122-129
• /
• 2015

In this study, we propose a low voltage stress and cost-effective light emitting diode (LED) driver capable of multi-channel current balancing. Conventional LED drivers require as many boost converters as the number of LED channels, whereas the proposed LED driver requires only one buck converter and several balancing capacitors instead of several expensive boost converters. Additionally, while the components of the boost converter have high voltage stress and depend on the LED driving voltage, components of the proposed driver have about one-half of the voltage stress across all components. The proposed driver exhibits high reliability and cost effectiveness because it only uses few DC blocking capacitors with no additional active devices to balance the current of multi-channel LEDs. The proposed driver exhibits high reliability and cost effectiveness. The validity of the proposed driver is confirmed through a theoretical analysis. An explanation of the design considerations and experimental results were obtained using a prototype applicable to a 46" LED-TV.

• 한국산학기술학회논문지
• /
• 제15권7호
• /
• pp.4489-4493
• /
• 2014

LED 조명 구동장치는 150W 이상에서 효율과 발열문제가 있고 W(와트)수가 다른 조명기기를 교체하는데 불편함이 있다. 본 논문에서는 멀티채널 LED 조명 구동장치를 드라이버 연동형 구조의 전원시스템과 멀티채널 구조형태의 드라이버 회로내장형으로 설계하였다. 본 개발품은 전원효율 93% 이상 및 역율 0.98 이상의 자동 제어 컨버터 구조로써 드라이버 연동형 구조의 고효율 LED 조명 구동장치와 자기보상방식의 자기최적화 구조의 드라이버다. 따라서, 본 논문은 THD 10% 이하와 기존 컨버터 대비 중량이 40% 이상 감소하였다.

• 전력전자학회논문지
• /
• 제15권2호
• /
• pp.111-118
• /
• 2010

최근 저전력 소모와 얇은 두께, 무수은, 다양한 색표현력, 빠른 응답 속도 등의 다양한 장점을 가진 LED(Light Emitting Diode)를 광원으로 이용하는 LCD(Liquid Crystal Display) TV가 큰 주목을 받고 있다. 이러한 LCD TV의 화면을 균등한 휘도로 표현하기 위해 기존의 구동회로는 다 채널의 LED를 정전류로 제어하는 DC/DC 컨버터가 각각 적용되었고, 이는 원가 상승 및 효율 저하의 원인이 되었다. 이를 해결하기 위하여 본 논문에서는 각 LED 채널에 적용되는 DC/DC 컨버터 없이 트랜스포머를 이용하여 모든 LED 채널의 정전류 제어가 가능한 고효율 저가격형 구동회로를 제안하고, 이에 대한 이론적 해석을 제시한다. 최종적으로 제안 회로를 46" LCD TV 백라이트에 적용하여 그 실험 결과를 바탕으로 제안 회로의 타당성을 검증한다.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.938-941
• /
• 2012

LED is divided to multichannel in order not to exceed a certain voltage in aspects of electric standard. However, it's not possible to know in accordance with what channel SMPS controls the constant voltage and current. In order to solve this problem, it needs to detect the maximum LED String voltage which is applied to LED control circuit, and it is possible to minimize the voltage drop when a difference of LED string voltage occurs by each channel if LED is controlled by the maximum LED string voltage detected. In addition, it is also possible to maximize the efficiency of LED if change LED voltage by detecting the maximum voltage. Feasibility of this claim was verified through implementation of the circuit.

• 디지털융복합연구
• /
• 제12권8호
• /
• pp.249-255
• /
• 2014

본 논문에서는, Visible Light Communication(VLC) 시스템에서 다수의 LED 광 송신 환경에 따른 간섭 발생으로 인한 성능저하를 보상하여 QoS를 만족하는 방법에 대하여 연구하였다. 가시광 통신 기술은 LED를 이용하여 조명과 동시에 데이터 전송이 가능한 융합 기술이다. 제안 시스템은 다수의 LED를 사용하여 데이터를 전송하는 환경에서 발생하는 간섭을 줄이는 기법으로, 조명 인프라를 이용한 실내 환경에서 한 개의 LED가 아닌 다수의 광원이 존재할 때 각 LED들 간의 간섭이 발생하게 된다. 또한 다수의 광원과 수신기의 경로 차이로 인한 다중 경로 신호 성분들은 상호간의 간섭으로 작용하여 ISI와 CCI를 발생시켜 시스템 성능을 열화 시킨다. 이를 해결하기 위해 다수의 광원들 간의 간섭 현상과 이로 인한 성능 저하에 대해서 분석하고, VLC 하향링크에서 채널화 코드인 Walsh Code를 확산부호로 사용하여 ISI, CCI를 제거하고 전체 시스템의 QoS를 보장하는 방법을 연구하였다.