• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.184-186
• /
• 2003

In order to reduce numerical dissipation in a multi-dimensional flow, a new variable interpolation method for Roe's FDS is proposed. By introducing the Mach number weighting function w, the properties at the cell-interface are interpolated and in a non flow-aligned grid system, it can give more accurate solution because of less numerical dissipation. Various test cases including oblique contact discontinuity are simulated and compared with the results of original Roe's FDS.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.184-187
• /
• 2003

Complete prediction of second order permeability tensor for three dimensional circular braided preform is critical to understand the resin transfer molding process of composites. The permeability can be predicted by considering resin flow through the multi-axial fiber structure. In this study, permeability tensor for a 3-D circular braided preform is calculated by solving a boundary problem of a periodic unit cell. Flow field through the unit cell is obtained by using a 3-D finite volume method (FVM) and Darcy's law is utilized to obtain permeability tensor. Flow analysis for two cases that a fiber tow is regarded as impermeable solid and permeable porous medium is carried out respectively. It is found that the flow within the intra-tow region of the braided preform is negligible if inter-tow porosity is relatively high but the flow through the tow must be considered when the porosity is low. To avoid checkerboard pressure field and improve the efficiency of numerical computation, a new interpolation function for velocity variation is proposed on the basis of analytic solutions. Permeability of the braided preform is measured through a radial flow experiment and compared with the permeability predicted numerically.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.2046-2056
• /
• 1996

The constrained melting inside an isothermally heated horizontal cylinder has been repeatedly investigated in many studies only for the moderate Rayleigh numbers. This study extends the range of Rayleigh numbers to systematically investigate the transition during melting processes, especially focusing on the complex multi-cellular flow pattern and thermal instability. The enthalpy-porosity formulation, with appropriate source terms to account for the phase change, is employed. For low Rayleigh numbers, initially developed single-cell base flow keeps the flow stable. For moderate Rayleigh numbers, even small disturbances in balance between thermal buoyance force and viscous force result in branched flow structure. For high Rayleight numbers, Benard type convection is found to develop within a narrow gap between thee wall and the unmelted solid. The marginal Rayleigh number and the corresponding wave number are in excellent agreement with those from linear stability theory.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.101-104
• /
• 2000

Nowadays, the issue of congestion control in high-speed communication networks becomes critical in view of the bandwidth-delay products for efficient data flow. In particular, the fact that the congestion is often accompanied by the data flow from the high-speed link to low-speed link is important with respect to the stability of closed-loop congestion control. The Virtual-Connection Network (VCN) in Gigabit Ethernet networks is a packet-switching based network capable of implementing cell- based connection, link-by-link flow-controlled connection, and single- or multi-destination virtual connections. VCN described herein differ from the virtual channel in ATM literature in that VCN have link-by-link flow control and can be of multi-destination. VCNs support both connection-oriented and connectionless data link layer traffic. Therefore, the worst collision scenario in Ethernet CSMA/CD with virtual collision brings about end-to-end delay. Gigabit Ethernet networks based on CSMA/CD results in non-deterministic behavior because its media access rules are based on random probability. Hence, it is difficult to obtain any sound mathematical formulation for congestion control without employing random processes or fluid-flow models. In this paper, an analytical method for the design of a congestion control scheme is proposed based on Smith＇s principle to overcome instability accompanied with the increase of end-to-end delays as well as to avoid cell losses. To this end, mathematical analysis is provided such that the proposed control scheme guarantees the performance improvement with respect to bandwidth and latency for selected network links with different propagation delays. In addition, guaranteed bandwidth is to be implemented by allowing individual stations to burst several frames at a time without intervening round-trip idle time.

• 대한기계학회논문집B
• /
• 제40권12호
• /
• pp.761-768
• /
• 2016

분리막을 이용한 탄화수소계 가스의 종 분리는 화학적 방법에 비해 공정 구성이 용이하고, 유지 보수가 쉬우며 또 경제성이 우수하다. 분리막 기술의 발전과 함께 다양한 응용이 가능하지만, 이를 위한 체계적인 공정 연구를 위한 해석 방법은 다양하지 않다. 본 연구에서는 상용 프로그램에서 제공하는 유저 루틴을 이용해 분리막의 공정 해석을 하기 위한 분리막 물질 전달 모델을 개발하였다. 모델 개발에서는 집중용량법, 다중 셀 기법, 그리고 차분형 모델링 기법을 비교하여 각각의 특징을 분석하였으며, 확장성과 정밀도가 우수한 차분형 모델링 기법을 최종 모델로 선정하였다. 선정모델을 이용해 분리막의 가스 투과율에 영향을 주는 인자인 투과율, 투과면적, 양단 압력차, 투과 유량 등에 대한 기초 해석을 수행하였다. 이를 통해 압력비가 높아지게 되면 투과율은 점진적으로 향상되지만, 실제 선택도는 압력비 상승에 대해 최적점이 존재함을 알 수 있으며, 투과율도 최적점이 존재하였다.

• 한국철도학회논문집
• /
• 제8권4호
• /
• pp.337-341
• /
• 2005

Algorithm for passenger flow analysis based on DEM(Discrete Element Method) is newly developed. In the new algorithm, there are many similarity between multi phase flow and passenger flow. The velocity component of 1st phase corresponds to the direction vector of cell, each particle to each passenger, volume fraction to population density and the momentum equation of particle to the walking velocity equation of passenger, etc. And, the walking velocity of passenger is also represented by the function of population density. Key algorithms are developed to determine the position of passenger, population density and numbering to each passenger, To verify the effectiveness of new algorithm, passenger flow analysis for simple railway station model is conducted. The results for passenger flow in the model station are satisfying qualitatively and quantitatively.

• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1146-1152
• /
• 2005

Recently, multi cell tube which is used for a cooling system of automobiles is mainly manufactured by the conform extrusion but this method is inferior as compared with direct extrusion in productivity per the unit time and in the equipment investment. Therefore, it is essential for the conversion of direct extrusion with porthole die. The direct extrusion with porthole die can produce multi cell tube which has the competitive power in costs and qualities compared with the existing conform extrusion. This study is designed to evaluate metal flow, welding pressure, extrusion load, tendency of mandrel deflection that is affected by variation of porthole shape in porthole die. Estimation is carried out using finite element method under the non-steady state. Also this study was examined into the cause of mandrel fracture through investigating elastic deformation of mandrel during the extrusion.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.702-715
• /
• 1990

본 연구에서는 개수로 후래시 증발기 내부를 단순화된 형태로 가정하여 앞서 언급된 운전조건 및 유입되는 기포의 갯수유량(혹은 기공률)에 따라 증발기 내부의 속 도 및 온도분포를 수치적으로 계산해 보고자 한다. 이를 위해 유동을 정상상태의 난 류유동으로 가정하였으며, 구형의 기포에 대해 평균적인 운동 및 성장을 지배하는 방 정식을 세우고 상변화에 의한 증발량을 구하였다. 즉 입구에서 유입된 기포들이 성 장하면서 자유표면을 통해서 빠져나가는 운동 궤적을 추적함으로써 증발기 내부 유동 의 속도 및 온도분포를 구하고 이를 바탕으로 총 증발량 및 증발성능을 예측해 보고자 하는 것이다. 그리고 이렇게 계산된 결과들을 기존의 실험값과 비교하였다.

• 센서학회지
• /
• 제23권6호
• /
• pp.388-391
• /
• 2014

The most promising application of the biofuel cells is implantable devices, so the biofuel cells should have an appropriate shape for the vascular vessel. We demonstrated the biofuel cell roll for using in tubes. MWNTs were aggregated by vacuum filtration on a nitrocellulose membrane filter, which was biocompatible and flexible. The MWNT aggregated nitrocellulose membrane used the electrodes of the biofuel cells because it was conductive as well as nanostuructured. Then, the membrane was rolled into the roll shape. The maximum power density of the biofuel cell roll was $7.9{\mu}W/cm^2$ at 153mV and 50 mM glucose. Also, the power density is expected to increase in its practical application if there is flow in the tube, which makes the transportation of fuel easy. The biofuel cell roll contacts with the wall of the tube, so flow in the tube does not disturb. Also, the biofuel cell roll has multi-layers offering more electroactive area.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.124-132
• /
• 2007

The main objective of this work is to investigate the characteristics of a heat pump system for fuel cell electric vehicle (FCEV). The present heat pump system adopts an electrically driven compressor running with R134a and uses the heat from the fuel cell stack as the heat source for the exterior heat exchanger. The experimental work has been done with various operating conditions such as different compressor speeds, fuel cell stack coolant temperatures and flow rates. The heating capacity was measured to be from 4 to 10 kW at $-20^{\circ}C$ ambient temperature, and the outlet temperature of interior heat exchanger was up to $70^{\circ}C$. After 30 seconds from start-up, the system reached a steady state and the heating capacity of 6.8 kW was acquired, and after 90 seconds, the air outlet temperature of interior heat exchanger became $35^{\circ}C$.