• 한국환경과학회지
• /
• 제26권8호
• /
• pp.955-966
• /
• 2017

Amendment of multi-binders was employed for the immobilization of metal(loid)s in field-contaminated soils to reduce the leaching potential. The effect of different types of multi-binders (lime/diammonium phosphate, diammonium phosphate/ladle slag and lime/ladle slag) on the solidification/stabilization of metal(loid)s (Pb, Zn, Cu and As) from the smelter soil and mine tailing soil were investigated. The amended soils were evaluated by measuring Toxicity Characterization Leaching Procedure (TCLP) leaching concentration of metal(loid)s. The results show that the leaching concentration of metal(loid)s decreased with the immobilization using multi-binders. In terms of TCLP extraction, the mixed binder was effective in the order of lime/ladle slag > diammonium phosphate/ladle slag > lime/diammonium phosphate. When the mixed binder amendment (0.15 g lime+0.15 g ladle slag for 1g smelter soil and 0.05 g lime+0.1 g ladle slag for 1 g mine tailing soil, respectively) was used, the leaching concentration of metal(loid)s decreased by 90%. However, As leaching concentration increased with diammonium phosphate/lime and diammonium phosphate/ladle slag amendment competitive anion exchange between arsenic ion and phosphate ion from diammonium phosphate. The Standard, Measurements and Testing programme (SM&T) analysis indicated that fraction 1 (F1, exchangeable fraction) decreased, while fraction 4 (F4, residual fraction) increased. The increased immobilization efficiency was attributed to the increase in the F4 of the SM&T extraction. From this work, it was possible to suggest that both arsenic and heavy metals can be simultaneously immobilized by the amendment of multi-binder such as lime/ladle slag.

• 한국도로학회논문집
• /
• 제7권2호
• /
• pp.57-67
• /
• 2005

거의 대부분의 문헌에서 아스팔트바인더의 유동거동을 다룰 때, 단일상 균일 유체로 일률적으로 취급하는데 이로 인한 오류가 심각하다. 본 연구에서는 개질이던 스트레이트이던 아스팔트바인더의 유동과 관련된 특성방정식을 모두 소개하고, 특히 다상 불균일 유체의 특성방정식을 새로이 소개한다. 이러한 식들의 특징 이 무엇인지를 실제 측정된 아스팔트바인더의 동전단시험 데이터를 이용하여 설명한다 특히 단일상 균일 유체와 다상 불균일 유체와의 거동차이전과 특성방정식의 차이점에 대해 집중 부각한다. 이러한 차이는 아스팔트유체를 다룰 때 어떠한 특성방정식을 사용해야 하며,특정 바인더를 분석하기 위해서는 어떤 물성을 조사해야 하는 지에 대해서 이해하게 한다. 본 연구는 개질바인더의 분석과 등급제정에 필수적인 정보를 제공한다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권7호
• /
• pp.135-147
• /
• 2015

Remediation of metal(loid)s-contaminated sites is crucial to protect human and ecosystem. Solidification and stabilization of metal(loid)s by the binder amendment is one of the cost-effective technologies. In this study, metal (loid)s in various field-contaminated soils obtained from steel-making, metal refinery and mining tillage were immobilized by the application of single binders such as diammonium phosphate (DAP), lime, and ladle slag. The efficiency of solidification and stabilization was evaluated by Toxicity Characteristic Leaching Procedure (TCLP) and the Standard, Measurements and Testing programme of European Union (SM&T) extraction processes. In terms of TCLP extraction, the binder was effective in order of lime > DAP > ladle slag. All binders were highly effective in the immobilization of Pb, Zn, Cu, Ni, and Cd. The increased immobilization efficiency is attributed to the increase in the Step III and IV fractions of the SM&T extraction. Lime and ladle slag were highly effective in the immobilization of the metal(loid)s, however, As release increased with DAP due to competition between the phosphate originated from DAP and arsenate. A further study is needed for the better immobilization of multi metal(loid)s using binary binders.

• 전기화학회지
• /
• 제17권4호
• /
• pp.237-244
• /
• 2014

We report novel and simple structure of supercapacitors fabricated by using flexible glass fibre separators as templates. This method does not require separate electrodes, binders and high pressure/temperature to build the supercapacitor unit cells as required by the conventional technology. The supercapacitors were fabricated by drop-casting solution mixtures of carbonaceous active materials/gel electrolytes onto two sides of glass fibre separators. Two carbonaceous materials (nanoscaled activated carbons, multi-walled carbon nanotubes) were investigated as electrode materials. The electrochemical measurements reveal that the separatorbased supercapacitors using ACs successfully demonstrated significant mass specific capacitance ($22.3F\;g^{-1}$) and energy density ($9.7Wh\;kg^{-1}$), indicating this method can be useful in fabricating flexible, wearable and stretchable energy storage devices in more straightforward and cost-effective way than current technology.

• 전기화학회지
• /
• 제13권3호
• /
• pp.169-174
• /
• 2010

Sulfur cathodes were prepared by ball milling method with different types of electronic conductors and binders in different ball milling time. The sulfur cell with a cathode prepared in 45 min ball milling time gave an initial discharge capacity of 794mAh/g with Super-P as an electronic conductor and poly(vinylidene fluoride) as a binder. The cathode with multi-walled carbon nanotube as an electronic conductor showed an initial discharge capacity of 944 mAh/g and a discharge capacity of 300 mAh/g after 20 cycles. Cathodes with poly(ethylene oxide) and poly(vinylidene fluoride) as binders showed different cycle performance.

• 콘크리트학회논문집
• /
• 제28권5호
• /
• pp.593-600
• /
• 2016

본 연구는 알칼리 활성화된 다성분계 시멘트에서 카올린(kaolinite, KA)의 효과에 다른 강도 특성에 관한 것이다. 연구에는 고로슬래그 미분말(GGBFS), 플라이애시(FA), 실리카 퓸(SF) 그리고 카올린(KA)을 결합재로 사용하였다. 시험체는 20% ~ 70% GGBFS, 10% ~ 60% FA, 10% SF(고정 비율) 그리고 10% ~ 50% KA의 범위로 혼합하였다. 물/결합재 비는 0.5이다. 결합재는 수산화나트륨(NaOH)과 규산나트륨($Na_2SiO_3$)을 전체 결합재(GGBFS + FA + SF + KA) 중량의 10% (10% NaOH + 10% $Na_2SiO_3$)비율로 사용하였다. 실험은 압축강도, 물 흡수율, 초음파 속도, 건조수축과 X-ray diffraction (XRD)를 수행하였다. 압축강도는 KA의 양이 증가할수록 감소하였다. 강도감소의 중요한 원인중 하나는 GGBFS 또는 FA와 비교하여 KA의 낮은 활성화 때문이다. 수화가 진행되는 동안 KA는 완전하게 반응하지 않았다. 또한 KA의 양이 증가할수록 UPV는 모든 시험체에서 감소하였다. 건조수축과 물 흡수율은 KA의 양이 증가함에 따라 증가하였다. 이러한 시험결과를 통해 다성분계 시멘트의 강도 특성은 KA와 GGBFS의 양에 큰 영향을 받는 것을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.139-147
• /
• 2022

이 연구에서는 다양한 결합재를 혼합하여 고강도 저알칼리형 인공어초용 시멘트 복합체를 설계하고 ME 방식 3D 프린터 출력 가능성을 평가했다. 그 결과, 3D 프린팅이 가능하도록 시멘트 복합체의 유동성을 조절하기 위해서는 물-결합재비, 규사-결합재비, 규사의 종류 등을 제어하는 것이 중요한 것으로 판단된다. 출력이 가능한 정도의 흐름값을 달성한 뒤 3D 프린터 출력물의 표면품질을 양호하게 유지하기 위해서는 증점제 첨가량을 조절하는 것이 필요하다. 또한, 알파형 반수석고를 사용한 배합에서는 급결효과를 제어하기 위해 응결조절제를 사용해야하며 이 배합의 흐름값을 유지하는 시간을 도출하여 출력시 적용하는 것이 필요하다. 재료의 요구 강도를 얻기 위해서는 우선 출력이 가능한 수준의 유동성을 만족시킨 후, 배합을 조정하면 가능하다. 알파형 반수석고를 포함한 다성분계 결합재의 사용으로 저알칼리형 인공어초용 3D 프린팅 배합을 설계하고 출력성을 확인하였으나, 알칼리 저감 효과를 정량적으로 평가하기 위해서는 추후 연구가 필요하다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.735-738
• /
• 2004

In this study, it was founded to make the optimal mixture for producing concrete which is self-compacting, yet, and generates low heat of hydration by using fly ash, blast furnace slags and limestone powders as binders in addition to cement while using super-plasticizers and viscosity agents as admixture agents. The structural behaviors of the concrete produced with the selected mixture were compared with those of the concrete currently using for construction of nuclear power plants. The study shows that the blended high fluidity concrete including limestone is better in workability and durability than the concrete currently in use for nuclear power plants.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.739-742
• /
• 2004

In this study, it was founded to make the optimal mixture for producing concrete which is self-compacting, yet, and generates low heat of hydration by using flyash, blast furnace slags and limestone powders as binders in addition to cement while using super-plasticizers and viscosity agents as admixture agents. The structural behaviors of the concrete produced with the selected mixture were compared with those of the concrete currently using for construction of nuclear power plants. The study shows that the blended high fluidity concrete including limestone is better in workability and durability than the concrete currently in use for nuclear power plants.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.181-185
• /
• 2020

Hazardous and noxious substance (HNS) detection sensors were fabricated using multi-walled carbon nanotubes (MWCNTs) and various binder materials for ion batteries. To obtain uniformly printed films, the printing precision according to the substrate cleaning method was monitored, and the printing paste mixing ratio was investigated. Binders were prepared using styrene butadiene rubber + carboxymethyl cellulose (SBR+CMC), polyvinylidene fluoride + n-methyl-2-pyrrolidene (PVDF+NMP), and mixed with MWCNTs. The surface morphology of the printed films was examined using an optical microscope and a scanning electron microscope, and their electrical properties are investigated using an I-V sourcemeter. Finally, sensing properties of MWCNT printed films were measured according to changes in the concentration of the chemical under the various applied voltages. In conclusion, the MWCNT printed films made of (SBR+CMC) were found to be feasible for application to the detection of hazardous and noxious chemicals spilled in seawater.