• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.395-400
• /
• 2021

In this paper, the wideband patch antenna is simulated and manufactured for the wireless LAN of 5GHz band that is defined in IEEE 802.11a. In the 802.11a, 200 channels of 675MHz are defined. Therefore, the bandwidth is needed more than 12.3%. For the wideband characteristics, low dielectric constant is realized with the multi-layer of 2 teflon substrates and the air dielectric layer and the feeding method of the coupled-line is used. Optimized wideband patch antenna is simulated with the return loss of 38.99dB at the center frequency of 5.43GHz and the bandwidth of 12.9%. The gain of manufactured patch antenna is 4.38, 4.52, and 5.12dBi at the channel number of 46, 56, and 153, respectively.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.677-682
• /
• 2023

A large number of motors and sensors are used to drive a humanoid robot. In order to solve the wiring problem that occurs when connecting multiple actuators, a controller based on a communication network has been used, and CAN, which is advantageous in terms of cost and a highly reliable communication protocol, was mainly used. In terms of the structure of the controller, a torque control type structure that is easy to implement an advanced algorithm into the upper controller is preferred. In this case, the low communication bandwidth of CAN becomes a problem, and in order to obtain sufficient communication bandwidth, a communication network is configured by separating into a plurality of CAN networks. In this study, a stability analysis on transmission time delay is performed for a multi-motor control system in which high-speed FlexRay and low-speed CAN communication networks are hierarchically connected in order to obtain a high communication bandwidth, and sensor information and driving signals are delivered within the allowed transmission time. The proposed hierarchical network-based control system is expected to improve control performance because it can implement multiple motor control systems with a single network.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.235-240
• /
• 2006

Stream Control Transmission Protocol (SCTP) provides the multi-homing feature, which allows each SCTP endpoint to use two or more IP addresses for data transmission. In this paper, the SCTP multi-homing feature is experimented and analyzed in terms of throughput over Linux platforms based on the NISTNET network emulator. We perform the experimental analysis of SCTP throughputs by SCTP multi-homing for the various network conditions: different packet loss rates, network bandwidths, and transmission delays. From the experimental results, it is shown that the SCTP multi-homing gives much better throughout gun over the SCTP single-homing case in the networks with a high packet loss rate. In the meantime, the other factors including network bandwidth and transmission delay do not seem to give a significant impact on the performance of the SCTP multi-homing.

• The Journal of Korean Association of Computer Education
• /
• v.5 no.4
• /
• pp.79-89
• /
• 2002

Several multi-user online applications which are operated by the existing fixed terminals(PC) are being changed into online application based on multi-platform operated by the several PC, PDA and mobile phones to perform concurrent works recently. The contents of current online application based multi-platform are, however, very unsophisticated because the applications don't consider the simultaneous accesses of shared data by multi-user and also the asymmetry of computing power and network bandwidth among each client. This paper proposed the methods of consistency control based on multi-platform, update propagation protocols among diverse clients, object management techniques which take the characteristics of mobile clients into account. We also implemented a chatting application based on multi-platform and it showed the proposed methods perform well.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2499-2522
• /
• 2017

Multi-hop networks are a low-setup-cost solution for enlarging an area of network coverage through multi-hop routing. Carrier sense multiple access with collision avoidance (CSMA/CA) is frequently used in multi-hop networks. Multi-hop networks face multiple problems, such as a rise in contention for the medium, and packet loss under heavy-load, saturated conditions, which consumes more bandwidth due to re-transmissions. The number of re-transmissions carried out in a multi-hop network plays a major role in the achievable quality of service (QoS). This paper presents a statistical, analytical model for the end-to-end delay of contention-based medium access control (MAC) strategies. These strategies schedule a packet before performing the back-off contention for both differentiated heterogeneous data and homogeneous data under saturation conditions. The analytical model is an application of Markov chain theory and queuing theory. The M/M/1 model is used to derive access queue waiting times, and an absorbing Markov chain is used to determine the expected number of re-transmissions in a multi-hop scenario. This is then used to calculate the expected end-to-end delay. The prediction by the proposed model is compared to the simulation results, and shows close correlation for the different test cases with different arrival rates.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.84-90
• /
• 2010

In this paper, the reduced size of broad bandpass filter with parallel coupled line structure is presented. This proposed filter can control bandwidth of narrow to broadband by adjusting the coupling coefficient. The conventional filter is operated with a narrow band. If a higher bandwidth is desired than the conventional narrow bandwidth, it is hard to realize due to the coupling coefficient between feeding line and resonator. In this paper, to overcome this limitation, a proposed bandpass filter is designed with reduced size due to SIR(Stepped Impedance Resonator) and multi-grade type structures than conventional one, and it has characteristics of adjusting bandwidth freely as per quantity of coupling coefficient. The proposed bandpass filter that, experimental results of insertion and return losses are 0.42 dB and 20.9 dB with bandwidth of 60 % at the center frequency of 5.8 GHz, respectively.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.349-358
• /
• 2007

Ethernet Passive Optical Network(EPON), which is one of PON technologies for realizing FTTx(Fiber-To-The-Curb/Home/Office), can cost-effectively construct optical access networks. In addition, EPON can provide high transmission rate up to 10Gbps and it is compatible with existing customer devices equipped with Ethernet card. To effectively control frame transmission from ONUs to OLT EPON can use Multi-Point Control Protocol(MPCP) with additional control functions in addition to Media Access Control(MAC) protocol function. For EPON, many researches on intra- and inter-ONU scheduling algorithms have been performed. Among the inter-ONU scheduling algorithms, IPS(Interleaved Polling with Stop) based on polling scheme is efficient because OLT assigns available time portion to each ONU given the request information from all ONUs. Since the IPS needs an idle time period on uplink between two consecutive frame transmission periods, it wastes time without frame transmissions. In this paper, we propose a dynamic bandwidth allocation algorithm to increase the channel utilization on uplink and evaluate its performance using simulations. The simulation results show that the proposed Two-phase Cycle Danamic Bandwidth Allocation(TCDBA) algorithm improves the throughput about 15%, compared with the IPS and Fast Gate Dynamic Bandwidth Allocation(FGDBA). Also, the average transmission time of the proposed algorithm is lower than those of other schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12A
• /
• pp.950-958
• /
• 2011

This paper focuses in the implementation of mesh router supporting multi-path routing based on IEEE 802.11s. In HWMP of IEEE 802.11s, the single path routing just was defined. So, in this work, we implemented not only the single path routing defined in IEEE 802.11s, but also a multipath routing based on AOMDV which extended the standard. A multi-channel multi-interface technology that can transmit and receive simultaneously and lower bandwidth reduction caused by interferences than a single-channel single-interface was implemented in our mesh router. We also developed an outdoor test bed with the mesh routers. The bandwidth of the mesh router and a real-time video streaming service were verified using the test bed. And, the single path and multipath routing algorithms are also compared. In this test bed, The average TCP bandwidth was 23.77 Mbps and the latency was 2.4 ms in five hops. The test bed could service real-time streaming with an average jitter of 0.547 ms in five hops. The mesh router that used the multipath routing path reduced the path recovery time by 12.73% on average.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.655-658
• /
• 2008

In this paper, we explain the combined scheme of multi-code modulation and trans-orthogonal modulation. The name of the explained scheme is the multi-code trans-orthogonal modulation. Additionally, we propose a multi-code trans-biorthogonal modulation scheme, which is a little more improved multi-code trans-orthogonal modulation. We show the performance of the proposed schemes and compare the performance of the proposed schemes with the orthogonal modulation by using the computer simulation. According to the computer simulations, we can know that the bandwidth efficiency of the proposed schemes is better than that of the conventional orthogonal modulation. The proposed schemes can be used in physical layer of digital wireless telecommunication system to provide high speed data rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.677-681
• /
• 2002

Several multi-user online applications which are operated by the existing fixed terminals(PC) are being changed into online application based on multi-platform operated by the several PC, PDA and mobile phones to perform concurrent works due to the popularization of mobile devices recently. This paper proposed the infrastructure for network applications based on multi-platform. We also proposed the methods of consistency control based on multi-platform, update propagation protocols among diverse clients which take the asymmetry of computing power and network bandwidth among each client into account. Moreover, we implemented a chatting application based on multi-platform and it showed the proposed infrastructure and methods perform well.