• 제목/요약/키워드: Multi-band frequency analysis

검색결과 89건 처리시간 0.023초

신호 대 마스킹 비 개선을 통한 다채널 보청 알고리즘 (A Novel Multi-Channel Hearing Aid Algorithm with SMR(signal-to-masking ratio) Improvement)

  • 김헌중;홍민철;차형태
    • 한국음향학회지
    • /
    • 제19권8호
    • /
    • pp.12-21
    • /
    • 2000
  • 본 논문에서는 심리음향 (psychoacoustics)을 이용한 다채널 동적 음향 압축 알고리즘을 통해 감음신경성 난청 (sensorinural hearing loss)을 보정하여 정상적인 지각 환경을 제공하는 알고리즘을 제안한다. 제안된 알고리즘은 라우드니스 조정 함수 (loudness scaling function)를 통해 난청자에게 적합한 라우드니스 레벨을 보상 시켜 주고, 난청자가 인식하게 되는 신호에 대한 마스킹 특성을 해석하여, 지각 영역 (perceptual domain)에서 각각의 주파수 성분에 대한 음압 레벨과 마스킹 임계치 (masking threshold) 사이의 거리로 정의되어지는 SMR(signal-to-masking ratio)을 통해 주파수 대비 (spectral contrast)를 복원 시켜 줌으로써 정상적인 지각 환경을 제공하는 것이다.

  • PDF

휴대용 소형임피던스 측정시스템을 이용한 다중주파수의 생체임피던스 해석 (Bioelectrical Impedance Analysis of Multi-frequency using Portable Small Impedance Measuring System)

  • 김민수;조영창
    • 한국융합학회논문지
    • /
    • 제8권2호
    • /
    • pp.121-126
    • /
    • 2017
  • 본 연구에서는 피부 등가모델을 통한 세포 내액과 세포 외액 성분의 생체임피던스 특성을 파악하기 위해 개발한 휴대용 소형 임피던스 측정시스템을 이용하여 4 전극법에 의한 비 침습 방식으로 다양한 주파수 대역에서 전신의 생체전기 임피던스를 측정실험을 수행하였다. 측정은 10명의 남성 피 실험자(평균 나이 $24{\pm}3.0$세, (BMI) $20.3kg/m^2$)를 대상으로 4주간 실시하였으며, 생체임피던스 다중주파수(1 kHz, 5 kHz, 50 kHz, 70 kHz, 100 kHz, 500 kHz)대역에서 측정하였다. 실험결과, 저주파 대역인 1 kHz 대역에서 임피던스가 가장 높게 측정되었고, 고주파 대역인 500 MHz에서 임피던스가 가장 낮게 측정되었다. 특히 50 kHz 대역이상에서 임피던스가 급속히 낮아짐을 실험을 통해서 확인하였다. 또한, 피부 등가회로모델을 통한 세포 내액과 세포 외액의 임피던스 특성을 파악하는 모의실험에서도 본 연구의 생체임피던스 측정시스템의 측정값과 유사한 특성이 얻어짐을 확인할 수 있었다.

MB-OFDM UWB 시스템에서 공간 다중화 MIMO 수신기의 성능 분석 (Performance Analysis for Spatial Multiplexing MIMO in MB-OFDM UWB Receivers)

  • 서정원;권양수;김석현;정재학
    • 한국통신학회논문지
    • /
    • 제33권2A호
    • /
    • pp.121-129
    • /
    • 2008
  • 본 논문은 ECMA(European Computer Manufacturers Association)의 표준인 MB-OFDM (MultiBand-Orthogonal Frequency Division Multiplexing) UWB(Ultra Wide-Band) 시스템에서 SISO(Single Input Single Output) 성능을 유지하면서 데이터 전송률을 2배로 올리기 위한 공간 다중화 MIMO(Multiple Input Multiple Output) 수신기 구조의 성능을 비교, 분석하였다. 이를 위해 송신단은2개의 안테나를 가지는 수평 부호화 방식과 대각 부호화 방식을 사용하였으며 수신단은 2, 3개 안테나에 대한 다양한 공간다중화 수신기 방식을 고려하였다. 다양한 공간 다중화 수신단 구조의 연산 복잡도 비교와 전산 모의 실험을 통해 $2{\times}2$ 구조의 MML 방법 또는 $\2{times}3$ 구조의 ZF 방법이 SISO 성능을 열화시키지 않고 전송률을 높이는 MIMO MB-OFDM의 간단한 수신단 구조임을 확인하였다.

체성분 분석용 칩 설계 (A Chip Design of Body Composition Analyzer)

  • 배성훈;문병삼;임신일
    • 대한전자공학회논문지SD
    • /
    • 제44권3호
    • /
    • pp.26-34
    • /
    • 2007
  • 본 논문에서는 신체 임피던스 측정법(Bioelectrical Impedance Analysis, 이하 BIA)을 기초로 한 체지방 측정 칩 설계에 대한 내용을 서술하였다. 제안된 회로는 인체에 전류 신호를 인가하는 회로, 인체를 통해 나온 전압 신호를 측정하는 회로, 회로의 동작을 제어하는 마이크로 콘트롤러(Micom), 그리고 분석프로그램이 내장된 메모리(SRAM, EEPROMs) 의 모든 기능을 하나의 칩에 집적하였다. 특히 정밀한 인체 임피던스 측정을 위하여 다주파수 동작이 가능한 대역통과필터(Band Pass Filter, BPF)를 설계하였다. 또한, 설계된 대역통과필터는 weak inversion 영역에서 동작하기 때문에 면적과 전력소모를 줄일 수 있었다. 그리고 측정부분 회로의 성능을 개선하기 위해서 차동차이증폭기(Differential difference amplifier, DDA)를 이용한 새로운 전파정류기(Full wave rectifier, FWR)를 설계하였다. 또한 이 회로는 마지막 단에 연결될 아날로그-디지털 변환기(ADC)의 설계에 대한 부담을 덜어주는 장점도 있다. 이 칩의 시제품은 CMOS 0.35um 공정을 이용하였고 전력소모는 모든 주파수에서 6mW 이며 전원전압은 3.3V이다. 전체 칩의 크기는 $5mm\times5mm$ 이다.

DS/CDMA 무선 광전송시스템 모델에서의 비선형 효과 해석 (Analysis on the Nonlinear Effect in the DS/CDMA Wireless-Optical Transmission System Model)

  • 주창복;오경석
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.98-101
    • /
    • 1998
  • The intermodulation distortion(IMD) due to laser diode nonlinearity of an asynhcronous direct sequence code diviion multiple access(DS/CDMA) system in wireless-optical transmission system model is analzed. A third order polynomial is used to represent laser diode nonlinearity. In DS/CDMA system, only one harmonic of the third-order intermodulation term falls on the signal frequency band and influences the system performance characteristics. To cancel multi-user interference and nonlinear distortion in a DS/CDMA wireless-optical transmission system model, the simple transversal filter structure with N-taps of (N-1) tap delay of 1 chip time delay line is used. It is necessary to select an optimal modulation index that provides a maximum signal-to-noise ratio and the results are useful for CDMA system design.

  • PDF

시각 자극의 집중에 따른 시간 변화에 대한 뇌 유발전위의 공간 - 주파수간 상관 변화 분석 (Spatial - Frequency Analysis of time-varying Coherence using ERP signals for attentional visual stimulus)

  • 이벽진;유선국
    • 감성과학
    • /
    • 제16권4호
    • /
    • pp.527-534
    • /
    • 2013
  • 본 연구에서는 코히어런스 분석을 통하여 시각집중 기간 동안 시간 변화에 대한 뇌기능과 관련된 공간-주파수간 연관관계를 해석하였다. 집중관련 시각자극 실험 데이터를 통해 ${\theta}$${\alpha}$ 대역에서 서로 다른 두피 위치간 위상연관변화를 확인하였다. 좌우 전두엽, 전두엽과 두정엽 간 뇌유발전위는 P100, N200지점에서 위상동조를 보였으며, 전두엽과 후두엽 간 뇌유발전위는 시각 처리 정보가 반영되는 P300지점에서 위상동조를 보였다. 고정된 길이의 창을 이용하는 단구간 푸리에 변환에 비하여 연속 웨이블릿 변환은 모 웨이블릿의 파라미터 조정을 통한 다중해상도 분석이 가능하였다. 따라서 연속 웨이블릿 변환을 이용한 코히어런스 결과가 시간변화에 대한 뇌유발전위의 공간-주파수간 연관관계의 변화를 확인하는데 유효함을 확인하였다. 비 집중 자극수행에 대해서는 위상동조 현상이 나타나지 않았다.

IMT-2000용 초소헝 적층형 대역 통과 칩 필터 설계 및 제작 (Miniaturized Multilayer Band Pass Chip filter for IMT-2000)

  • 임혁;하종윤;심성훈;강종윤;최지원;최세영;오영제;김현재;윤석진
    • 한국세라믹학회지
    • /
    • 제40권10호
    • /
    • pp.961-966
    • /
    • 2003
  • BiN $b_{0.975}$S $b_{0.025}$ $O_4$저온 동시 소결 세라믹 후막 및 적층 세라믹(Multi-Layer Ceramic, MLC) 공정 기술을 이용한 소형 마이크로파 필터를 설계 및 제작하였다. MLC 칩 대역 통과 필터(BPF)는 소형화와 낮은 가격이라는 장점을 가지고 있다. 제안된 필터는 stripline 공진기와 결합 캐패시터로 구성되며, IMT-2000용 단말기의 수신단 통과 대역에 적합하며 통과 대역 아래쪽 저지 대역에 감쇠극이 형성되도록 설계하였다. 상용 마이크로파 회로 및 구조 설계 tool를 이용하여 제안된 MLC칩 대역 통과 필터의 공진기 전자기적 결합량 변화 및 결합 캐패시턴스에 따른 필터의 주파수 특성, 특히 감쇠극의 위치 변화에 대해 살펴보았다. 제작된 MLC 칩 BPF의 주파수 특성은 시뮬레이션 결과와 매우 일치하였다.

Characteristic analysis on train-induced vibration responses of rigid-frame RC viaducts

  • Sun, Liangming;He, Xingwen;Hayashikawa, Toshiro;Xie, Weiping
    • Structural Engineering and Mechanics
    • /
    • 제55권5호
    • /
    • pp.1015-1035
    • /
    • 2015
  • A three-dimensional (3D) numerical analysis for the train-bridge interaction (TBI) system is actively developed in this study in order to investigate the vibration characteristics of rigid-frame reinforced concrete (RC) viaducts in both vertical and lateral directions respectively induced by running high-speed trains. An analytical model of the TBI system is established, in which the high-speed train is described by multi-DOFs vibration system and the rigid-frame RC viaduct is modeled with 3D beam elements. The simulated track irregularities are taken as system excitations. The numerical analytical algorithm is established based on the coupled vibration equations of the TBI system and verified through the detailed comparative study between the computation and testing. The vibration responses of the viaducts such as accelerations, displacements, reaction forces of pier bottoms as well as their amplitudes with train speeds are calculated in detail for both vertical and lateral directions, respectively. The frequency characteristics are further clarified through Fourier spectral analysis and 1/3 octave band spectral analysis. This study is intended to provide not only a simulation approach and evaluation tool for the train-induced vibrations upon the rigid-frame RC viaducts, but also instructive information on the vibration mitigation of the high-speed railway.

MIMO 구조의 마이크로스트립 패치 안테나 분석 (Analysis Microstrip Patch Antenna of MIMO Structure)

  • 김선웅;박정진;최동유
    • 한국통신학회논문지
    • /
    • 제40권5호
    • /
    • pp.944-949
    • /
    • 2015
  • 본 논문에서는 단일 패치 안테나에 다중 포트를 결합하여 무선 통신 기기의 응용에 적합한 MIMO구조의 패치 안테나를 제안하였다. 제안된 MIMO 패치 안테나는 비 유전율 4.5, 손실 탄젠트 0.0035, 두께 1.52 mm를 갖는 TRF-45 기판을 통해 설계되었으며, 안테나의 중심 주파수는 ISM (Industrial Scientific and Medical) 대역의 2.45 GHz이다. 제안된 MIMO 패치 안테나는 2.16 ~ 2.66 GHz 대역에서 500 MHz의 대역폭을 보였으며, 비 대역폭은 24.1%이다. 안테나의 반사손실 및 정재파비 결과는 제안된 대역에서 2.45 GHz의 ISM 대역에서 -62.05 dB, 1.01이다. 대역폭에 포함된 각각의 대역은 2.3 GHz의 WiBro 대역은 -17.43 dB, 1.33, 2.4 GHz의 WiFi 대역은 -31.89 dB, 1.05, 2.5 GHz의 WiMax 대역은 -36.47 dB, 1.03이다. 대역폭에 포함된 대역의 방사패턴 분석은 지향성의 패턴을 보였으며, 2.3 GHz의 WiBro 대역은 4.22 dBi, 2.4 GHz의 WiFi 대역은 4.12 dBi, 2.45 GHz의 ISM 대역은 4.06 dBi, 2.5 GHz의 WiMax 대역은 3.96 dBi의 이득을 보였다.

고주파용 세라믹 필터의 제작을 위한 디자인 해석 (The Design Simulation for Manufacture of High Frequence Ceramic Filter)

  • 이수호;석정영;류기홍;사공건;윤광희;류주현;박창엽
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
    • /
    • pp.418-421
    • /
    • 2001
  • The ceramic filters were developed using technology similar to that of quartz crystal and electromechanical filter. However, the key to this development involved the theoretical analysis of vibration modes and material improvements of piezoelectric ceramics. The primary application of ceramic filters has been for consumer-market use. Accordingly, a major emhpasis has involved mass production technology, leading to low-priced devices. A typical ceramic filter includes monolithic resonators and capacitors packaged in unique configurations. Nakazawa developed a double-mode resonator as two acoustically coupled single resonators. And he developed 10.7MHz crystal filters using multi-energy trapping mode of thickness shear vibration. He succeeded in realizing a two-pole band pass filter response without external inductance by splitting a dot electrode to creat coupled symmetric and antisymmetric vibration modes. Accordingly, the simulation for ceramic filter were important. So that, this paper were investigated the pass frequency of filter on the electrode length and thickness of ceramic.

  • PDF