• 제목/요약/키워드: Multi-band frequency

검색결과 503건 처리시간 0.032초

주파수 영역의 선택정보를 이용한 멀티펄스 음성부호화 방식에 관한 연구 (A Study on Multi-Pulse Speech Coding Method by using Selected Information in a Frequency Domain)

  • 이시우
    • 인터넷정보학회논문지
    • /
    • 제7권4호
    • /
    • pp.57-66
    • /
    • 2006
  • 본 연구에서는 연속음성에서 무성자음을 포함한 천이구간을 탐색, 추출하고 주파수대역에서 근사합성하는 새로운 멀티펄스 음성부호화 방식 (FBD-MPC)를 제안하였다. 실험결과, 여자 음성의 경우 TSIUVC 추출율은 84.8%(파열음), 94.9%(마찰음), 92.3%(파찰음), 남자 음성의 경우는 88%(파열음), 94.9%(마찰음), 92.3%(파찰음)의 결과를 얻었다. 아울러, 0.547kHz 이하 2.813kHz 이상의 주파수 정보를 사용하여 TSIUVC 음성파형을 양호하게 근사합성할 수 있었으며, 유성음/무성음 선택정보를 이용한 MPC와 유성음/무음/TSIUVC를 이용한 FBO-MPC를 평가한 결과, FBO-MPC의 음질이 MPC의 음질에 비하여 개선되었음을 알 수 있었다.

  • PDF

차세대 무선 스피커 시스템의 전송거리 증대를 위한 MB-OFDM UWB 기술 (MB-OFDM UWB Technology for Increasing Transmission Reach of Wireless Speaker Systems)

  • 김도훈;위정욱;이현석;이충용
    • 대한전자공학회논문지TC
    • /
    • 제48권6호
    • /
    • pp.1-5
    • /
    • 2011
  • 차세대 무선 스피커의 오디오 신호 전송 거리의 증대를 위한 Multi-band orthogonal frequency division multiplexing ultra-wideband (MB-OFDM UWB) 기술을 제안한다. 제안된 기술은 기존의 MB-OFDM UWB기술을 바탕으로 리드 솔로몬 코딩 기법을 추가하여 간헐적인 랜덤 에러를 완벽하게 보상하여 SNR을 이득을 얻음으로써 전송거리를 개선하였다. 시뮬레이션 환경으로 WPAN 채널모델중 CM1을 사용하였고, 백색잡음과 캐리어 주파수 오프셋, 샘플링 주파수 오프셋을 반영하여 시뮬레이션 환경이 실제 모뎀의 동작 환경과 유사하도록 설정하여 시뮬레이션의 신뢰를 높혔다. 시뮬레이션을 통해서 최대 2dB의 SNR 이득을 얻었고, 이는 수신기의 수신감도를 향상시켜 제안된 시스템은 최대 12.6미터까지 신호 전송이 가능한 것을 확인하였다.

16-QAM OFDM-Based W-Band Polarization-Division Duplex Communication System with Multi-gigabit Performance

  • Kim, Kwang Seon;Kim, Bong-Su;Kang, Min-Soo;Byun, Woo-Jin;Park, Hyung Chul
    • ETRI Journal
    • /
    • 제36권2호
    • /
    • pp.206-213
    • /
    • 2014
  • This paper presents a novel 90 GHz band 16-quadrature amplitude modulation (16-QAM) orthogonal frequency-division multiplexing (OFDM) communication system. The system can deliver 6 Gbps through six channels with a bandwidth of 3 GHz. Each channel occupies 500 MHz and delivers 1 Gbps using 16-QAM OFDM. To implement the system, a low-noise amplifier and an RF up/down conversion fourth-harmonically pumped mixer are implemented using a $0.1-{\mu}m$ gallium arsenide pseudomorphic high-electron-mobility transistor process. A polarization-division duplex architecture is used for full-duplex communication. In a digital modem, OFDM with 256-point fast Fourier transform and (255, 239) Reed-Solomon forward error correction codecs are used. The modem can compensate for a carrier-frequency offset of up to 50 ppm and a symbol rate offset of up to 1 ppm. Experiment results show that the system can achieve a bit error rate of $10^{-5}$ at a signal-to-noise ratio of about 19.8 dB.

RF MEMS Switches and Integrated Switching Circuits

  • Liu, A.Q.;Yu, A.B.;Karim, M.F.;Tang, M.
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제7권3호
    • /
    • pp.166-176
    • /
    • 2007
  • Radio frequency (RF) microelectromechanical systems (MEMS) have been pursued for more than a decade as a solution of high-performance on-chip fixed, tunable and reconfigurable circuits. This paper reviews our research work on RF MEMS switches and switching circuits in the past five years. The research work first concentrates on the development of lateral DC-contact switches and capacitive shunt switches. Low insertion loss, high isolation and wide frequency band have been achieved for the two types of switches; then the switches have been integrated with transmission lines to achieve different switching circuits, such as single-pole-multi-throw (SPMT) switching circuits, tunable band-pass filter, tunable band-stop filter and reconfigurable filter circuits. Substrate transfer process and surface planarization process are used to fabricate the above mentioned devices and circuits. The advantages of these two fabrication processes provide great flexibility in developing different types of RF MEMS switches and circuits. The ultimate target is to produce more powerful and sophisticated wireless appliances operating in handsets, base stations, and satellites with low power consumption and cost.

다상분해 신호의 주파수 스펙트럼 압축 효과 (The Frequency Spectrum Compression Effects for Polyphase Decomposition Signal)

  • 박영석;정원용
    • 융합신호처리학회논문지
    • /
    • 제7권2호
    • /
    • pp.65-72
    • /
    • 2006
  • 디지털신호처리에 있어서 신호의 다상분해(polyphase decomposition)는 멀티레이트(multirate) 시스템 구현에 있어서 다양한 용도로 사용된다. 특히 디지털 필터설계 등에 있어서 다채널 신호를 제공함으로써 병열연산을 가능하게 하여 알고리즘의 성능을 개선하는데 특히 유용하다. 일반적으로 다상분해신호는 원신호를 다운샘플링을 위해 데시메이션(decimation)하기 때문에 원신호에 비해 많은 고주파 성분을 포함하여 주파수 대역이 확장되는 경향이 있다. 이러한 성질은 다상분해신호의 활용, 즉 디지털 신호처리 시스템의 구조나 성능에 상당한 제약을 초래한다. 따라서 본 연구에서는 다상분해신호에 대한 완전 대역압축 및 복원 방법을 이론적으로 제시하고 Matlab 시뮬레이션을 통하여 그 유효성을 확인한다.

  • PDF

Design and Implementation of Broadband Antenna and Diplexer for Dual- Band Handsets

  • Joung, Myoung-Sub;Park, Jun-Seok;Kim, Hyeong-Seok;Lim, Jae-Bong;Cho, Hong-Goo
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제4C권6호
    • /
    • pp.288-294
    • /
    • 2004
  • In this paper, a ceramic antenna and diplexer are designed for dual-band handset ap plications. Basically, the antenna is designed by using the meander line configuration. The diplexer presented in this paper is composed of both low- and high-pass filters. We have designed the low- and high-pass filters with attenuation poles to improve the attenuation performances of the diplexer. The attenuation poles are located at each rejection frequency region so as to improve the shrinkage characteristic of the diplexer. In order to accomplish the volume effectiveness, the antenna and the diplexer have been designed and fabricated in a multi-layer structure. The diplexer designed with a multi-layer structure has inductors and capacitors, which are implemented by LTCC (Low Temperature Co-fired Ceramics) process technique. Design of the multi-layer antenna and diplexer has been achieved by employing the full 3-D EM simulation. The designed antenna and diplexer offer excellent return loss and broadband performances with highly isolated rejection performance.

RFID 대역에서 동작하는 이중 대역 전력증폭기 설계 (Design of Dual-Band Power Amplifier for the RFID Frequency-Band)

  • 김재현;황선국;박효달
    • 한국전자파학회논문지
    • /
    • 제25권3호
    • /
    • pp.376-379
    • /
    • 2014
  • 본 논문은 910 MHz와 2.45 GHz 대역에서 동작하는 RFID 트랜시버용 전력증폭기를 설계 및 제작하였다. 제안된 이중 대역 전력증폭기는 집중정수 소자로 구현된 910 MHz 대역의 정합 회로와 분포정수 소자로 구현된 2.45 GHz 대역의 정합 회로로 구성되며, 두 대역의 격리를 위하여 910 MHz 대역에 대하여 대역 제거 필터(band rejection filter)로 동작하고, 2.45 GHz 대역에서는 대역 통과 필터(band pass filter)로 동작하는 ${\lambda}/2$ 직렬 마이크로스트립 전송 선로로 구성되어 있다. 제작된 이중 대역 전력증폭기는 910 MHz와 2.45 GHz에서 이득이 각각 8 dB와 1.5 dB를 나타냈으며, 입력 전력 10 dBm을 인가하여 얻은 출력 전력은 두 대역 모두 20 dBm을 얻었다.

국내 DAA 기술 기준을 고려한 MB-OFDM UWB 성능 평가 (A Performance Evaluation of MB-OFDM UWB System Considering the Domestic DAA Regulation)

  • 신철호;최상성
    • 한국전자파학회논문지
    • /
    • 제19권9호
    • /
    • pp.1000-1009
    • /
    • 2008
  • 본 논문의 목적은 $3.1{\sim}4.8$ GHz 대역에서 UWB를 허용하기 위해 국내에서 제시한 DAA 기술 기준을 적용하여 MB-OFDM UWB(Multi-Band Orthogonal Frequency Division Multiplexing Ultra Wide Band) 시스템과 피 간섭신호간의 성능을 평가하는 것이다. DAA 기술 기준에서 정한 피 간섭 신호로는 유럽에서 DAA 적용 시스템으로 검토하고 있는 WiMAX나 국내에 도입될 것으로 예상되는 4G 시스템 등이 있다. MB-OFDM UWB 시스템은 TFC(Time Frequency Code)에 따라 심볼마다 3개 주파수 대역을 호핑하는 TFI(Time frequency Interleaving) 모드와 하나의 주파수 대역을 선택하여 신호를 전송하는 FFI(Fixed Frequency Interleaving) 모드를 지원한다. 본 논문에서는 호핑 모드에 따른 간섭 영향을 정확하게 분석하기 위해 TFC에 따른 평균 송신 출력 및 동기 구조를 반영하여 시뮬레이션을 수행하였다. 분석 결과, 국내 DAA 기술 기준을 적용할 경우, UWB 간섭 신호로부터 Wi-MAX 통신 시스템은 철저히 보호되는 반면, MB-OFDM UWB 시스템은 DAA 검출 레벨의 간섭 신호에 의해 주파수 다양성 효과를 얻을 수 있는 주파수 호핑 모드에서 조차 심각한 성능 저하가 발생하였다.

다중 사용자 OFDM 시스템에서 다이버시티를 향상시키기 위한 새로운 기법 (A New Diversity Technique for multi-user OFDM)

  • 허지행;민현기;김형종;홍대식
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.217-218
    • /
    • 2008
  • A new diversity technique is proposed for multi-user single-input single-output (SISO) orthogonal frequency division multiplexing (OFDM) uplink system. Each user transmit a symbol using frequency band of all users that are active in the uplink. In addition, a receiver detect each signal using maximum likelihood (ML) method. Simulation results show that the proposed technique improves a diversity order without an additional bandwidth and a loss of data rate.

  • PDF

Improving the Isolation of MIMO Antennas Using Split Ring Resonators

  • Lee, Young-Ki;Chung, Hae-Il;Choi, Jae-Hoon
    • Journal of electromagnetic engineering and science
    • /
    • 제10권4호
    • /
    • pp.303-308
    • /
    • 2010
  • This paper proposes a method for improving the isolation characteristic of multi-input multi-output (MIMO) antennas using a split ring resonator (SRR) array structure between the two radiating elements. The fabricated antenna satisfies the 10 dB return loss requirement in the Mobile-WiMAX frequency band from 3.4 GHz to 3.6 GHz. The isolation between the two radiating elements is improved by approximately 20 dB at the center frequency by inserting a SRR array structure. The measured peak gains of the two elements are 2.3 dBi and 2.4 dBi, respectively.