• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.361-371
• /
• 2021

This study investigated the longitudinal effect of peer play behavior (PPB) during toddlerhood on social competence (SC), followed by the effect on adaptation to elementary school. Data were collected from the 4th to 9th Panel Study on Korean Children between 2011 to 2016, of which the data collected from 114 boys and 94 girls were finally analyzed. Multi-Mediator Model Analysis were performed using SPSS and PROCESS macro programs. First, PPB observed at the age of three significantly predicted PPB observed at ages four and five. It significantly affected SC observed at the age of six after transitioning through PPB at each stage. Second, PPB observed at the age of three significantly impacted the degree of adaptation in the first and second grades of elementary school. The medium identified in this second finding was PPB observed after the age of three and SC observed at the age of six.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.4
• /
• pp.42-52
• /
• 2022

North Korea continues to upgrade and display its long-range rocket launchers to emphasize its military strength. Recently Republic of Korea kicked off the development of anti-artillery interception system similar to Israel's "Iron Dome", designed to protect against North Korea's arsenal of long-range rockets. The system may not work smoothly without the function assigning interceptors to incoming various-caliber artillery rockets. We view the assignment task as a dynamic weapon target assignment (DWTA) problem. DWTA is a multistage decision process in which decision in a stage affects decision processes and its results in the subsequent stages. We represent the DWTA problem as a Markov decision process (MDP). Distance from Seoul to North Korea's multiple rocket launchers positioned near the border, limits the processing time of the model solver within only a few second. It is impossible to compute the exact optimal solution within the allowed time interval due to the curse of dimensionality inherently in MDP model of practical DWTA problem. We apply two reinforcement-based algorithms to get the approximate solution of the MDP model within the time limit. To check the quality of the approximate solution, we adopt Shoot-Shoot-Look(SSL) policy as a baseline. Simulation results showed that both algorithms provide better solution than the solution from the baseline strategy.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.81-87
• /
• 2014

Flow characteristics and the operating range of gas velocity was investigated for a two-stage bubbling fluidized-bed (0.1 m-i.d., 1.2 m-high) that had continuous solids feed and discharge. Solids were fed in to the upper fluidized-bed and overflowed into the bed section of the lower fluidized-bed through a standpipe (0.025 m-i.d.). The standpipe was simply a dense solids bed with no mechanical or non-mechanical valves. The solids overflowed the lower bed for discharge. The fluidizing gas was fed to the lower fluidized-bed and the exit gas was also used to fluidize the upper bed. Air was used as fluidizing gas and mixture of coarse (< $1000{\mu}m$ in diameter and $3090kg/m^3$ in apparent density) and fine (< $100{\mu}m$ in diameter and $4400kg/m^3$ in apparent density) particles were used as bed materials. The proportion of fine particles was employed as the experimental variable. The gas velocity of the lower fluidized-bed was defined as collapse velocity in the condition that the standpipe was emptied by upflow gas bypassing from the lower fluidized-bed. It could be used as the maximum operating velocity of the present process. The collapse velocity decreased after an initial increase as the proportion of fine particles increased. The maximum took place at the proportion of fine particles 30%. The trend of the collapse velocity was similar with that of standpipe pressure drop. The collapse velocity was expressed as a function of bulk density of particles and voidage of static bed. It increased with an increase of bulk density, however, decreased with an increase of voidage of static bed.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.562-571
• /
• 2019

The expansion of the performing arts market to include new genres of art that combine art and cutting-edge media technology has surpassed the limitations of traditional theatre art elements such as stage, costumes, lighting, sound, and props, allowing free expression of space-time and visual art. It is growing into a wide area with unlimited potential in the performing arts sector. In response to these changes and the demands of the time, there is an increasing demand for multi-talents who can plan and produce arts and technology-converged contents that will contribute to the development of the performing arts industry. As a result, university departments related to theatre art across the country feel that it is urgent to develop curricula that will enhance students' competency by incorporating the latest media technologies such as virtual reality, holography, and interactive motion sensors into the existing performance art visualization process. In this study, the author will examine the process of developing courses in technology-incorporated theatre art (design) through case studies of media technology-converged performances from the past 10 years. Based on the traditional concept of theatre art, the attempt to fuse stage art with media technology will be a cornerstone of attempts to foster a group of talented artists who transcend the limits of creative visual expression and creative value.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.349-360
• /
• 2017

In concrete construction work, formwork is an important process that accounts for 10% of the total construction cost. Recent buildings are becoming bigger and higher. In order to maximize the efficiency and safety of this formwork, the system of formworking has been systematized. However, the human accidents and the noise complaints arise from dismantling processes frequently occur. In order to solve these problems, most of them are dependent on foreign technology, but they do not take into consideration the conditions of domestic construction site. In this study, we developed a table type multi-drop system form for a slab and beam which can improve the process, safety and reduction of disassembly noise, and evaluated the physical properties of the main members which are used in the system. The results of this study show that there is sufficient strength to be used as a slab and a laying material for both a yoke beam and a supporting post. The noise level is improved compared to existing method.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.64-72
• /
• 2020

When the multi-stage combustion process is applied to the cement kiln to reduce nitrogen oxide emissions in the cement industry, oxidation/reduction section that can increase combustion efficiency by reducing NO_x to NO and completely burning unburned materials is essential In this study, when applied the oxidation/reduction system of the cement kiln preheater and calciner, the optimal oxidation/reduction calcination crisis that can secure the quality stability of the final product, cement clinker, was to be observed macroscopically, and the mass change of raw materials according to the burning conditions, decarbonation rate, and calcination rate were investigated. The results showed that the thermal decomposition of raw materials tends to be promoted in the oxidation condition rather than in the reduction condition, and that the thermal decomposition of limestone, which has a relatively high CaO content, is carried out later than that of cement raw meal, which is thought to be caused by the CO₂ fractionation in the kiln. The thermal decomposition properties of raw materials according to oxidation/reducing burning condition showed a relatively large difference in temperature range lower than normal limestone themal decomposition temperature, which is thought to be expected to improve the thermal efficiency of raw materials according to the formation of oxidation condition in the section 750℃ of burning temperature. However, for this study, lab scale. Because there is a difference from the field process as a scale study, it is deemed necessary to verify the actual test results of the pilot scale.

• Journal of Korean Library and Information Science Society
• /
• v.46 no.2
• /
• pp.337-366
• /
• 2015

This study had begun about the conflict between a lack of social adjustment and integration program for resident foreigners in Korea and a duplication of multicultural service in a specific area. This study was implemented through literature review and interview for analyses of the current status and problems of multicultural policy, subdivided into 3-stages model to reach the multiculturalism as multicultural policy process. The first stage suggested the unification of a channel for establishing a policies, reinforcing the functions of government ministries and the cooperation between the branches of the government. The second stage attempted to build the multicutural institutes network in a specific area unit, considering of the geographical and administrative environments. The third stage focused on the activities of individual organizations and proposed collaboration with library, school, support center for multi-cultural families, social service center, sport center, community center, and cultural facility. Additionally, 3-stages model emphasized on civic organization's role. This study was offered a meta-platform leaded by library community for sharing the information about planning and managing of multicutural programs and also mentioned significances for formulating multicutural policies. As a result, this study was presented and specified the 3-stages model to reach the multiculturalism, and verified the various considerations which have influenced the refinements of the multicultural policies as the demographic and geographical characteristics.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.2
• /
• pp.141-152
• /
• 2004

Optics fabrication process for precision space optical parts includes bound abrasive grinding, loose abrasive lapping and polishing. The traditional bound abrasive grinding with bronze bond cupped diamond wheel leaves the machine marks of about $20{mu}m$ rms in height and the subsurface damage of about 1 ${mu}m$ rms in height to be removed by subsequent loose abrasive lapping. We explored an efficient quantitative control of precision CNC grinding. The machining parameters such as grain size, work-piece rotation speed and feed rate were altered while grinding the work-piece surfaces of 20-100 mm in diameter. The input grinding variables and the resulting surface quality data were used to build grinding prediction models using empirical and multi-variable regression analysis. The effectiveness of such grinding prediction models was then examined by running a series of precision CNC grinding operation with a set of controlled input variables and predicted output surface quality indicators. The experiment achieved the predictability down to ${pm}20$ nm in height and the surface roughness down to 36 nm in height. This study contributed to improvement of the process efficiency reaching directly the polishing and figuring process without the need for the loose abrasive lapping stage.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.3
• /
• pp.11-19
• /
• 2009

Recently, concerns relating to the maintenance of large structures have been increased. In addition, the number of large structures that need to be evaluated for their structural safety due to natural disasters and structural deterioration has been rapidly increasing. It is common for the structural characteristics of an older large structure to differ from the characteristics in the initial design stage, and changes in dynamic characteristics may result from a reduction in stiffness due to cracks on the materials. The process of deterioration of such structures enables the detection of damaged locations, as well as a quantitative evaluation. One of the typical measuring instruments used for the monitoring of bridges and buildings is the dynamic measurement system. Conventional dynamic measurement systems require considerable cabling to facilitate a direct connection between sensor and DAQ logger. For this reason, a method of measuring structural responses from a remote distance without the mounted sensors is needed. In terms of non-contact methods that are applicable to dynamic response measurement, the methods using the doppler effect of a laser or a GPS are commonly used. However, such methods could not be generally applied to bridge structures because of their costs and inaccuracies. Alternatively, a method using a visual image can be economical as well as feasible for measuring vibration signals of inaccessible bridge structures and extracting their dynamic characteristics. Many studies have been conducted using camera visual signals instead of conventional mounted sensors. However, these studies have been focused on measuring displacement response by an image processing technique after recording a position of the target mounted on the structure, in which the number of measurement targets may be limited. Therefore, in this study, a model experiment was carried out to verify the measurement algorithm for measuring multi-point displacement responses by using a DIC (Digital Image Correlation) technique.

• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.313-326
• /
• 2021

This study was to introduce ecological momentary assessment and show how to apply it to real-world research. As preliminary study for sustainable development, the result explained growth model using senior's longitudinal data and suitability of multi-level model in EMA data with regression analysis. The total variance of dependent variable was determined through a base model with only intercept and approximately 47% of total variance was caused by individual differences and 53% by time point differences. Second model was used to verified that each individual has a different effect on the senior vitality and effect on time was not significant. This is because it is the result of a preliminary stage where treatment is not involved and there is no significant change in process of collecting EMA data without external intervention. Third model that add gender as an independent variable showed significant change in both time and gender. Finally compared the PRD for each model and found models that without gender variables fit the data more effectively. This suggests that studies dealing with longitudinal data such as EMA data should adopt multi-level model that can measure individual characteristics, taking into account respondents' time and context.