• 한국인터넷방송통신학회논문지
• /
• 제15권5호
• /
• pp.219-224
• /
• 2015

최근에 멀티코어 프로세서 구조가 디지털 신호처리 프로세서의 성능을 개선하기 위하여 광범위하게 이용되고 있다. 이러한 멀티코어 프로세서는 크게 대칭적 구조와 비대칭적 구조로 나뉜다. 비대칭적 멀티코어 프로세서는 대칭적 멀티코어 프로세서에 비하여 더욱 성능이 높고 효율적이라고 알려져 있다. 본 논문에서는 비대칭적 멀티코어 디지털 신호처리 프로세서가 대칭적 멀티코어 디지털 신호처리 프로세서에 대하여 갖는 성능의 우수성을 고찰하기 위하여, 다양한 구성을 갖는 비대칭적 쿼드코어, 옥타코어 및 헥사데카코어 디지털 신호처리 프로세서에 대하여 UTDSP 벤치마크를 입력으로 하여 모의실험을 수행하여 그 성능을 측정하고 비슷한 하드웨어 규모의 대칭적 멀티코어 디지털 신호처리 프로세서와 그 성능을 비교하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권1호
• /
• pp.1-12
• /
• 2021

Due to the Global Navigation Satellite System (GNSS) modernization, the recently launched GNSS satellites transmit signals at various frequency bands of L1, L2 and L5. Considering the Korea Positioning System (KPS) signal and other GNSS augmentation signals in the future, there is a high probability of applying more complex communication techniques to the new GNSS signals. For the reason, GNSS receivers based on flexible Software Defined Radio (SDR) concept needs to be developed to evaluate various experimental communication techniques by accessing each signal processing module in detail. In this paper, we introduce a multi-constellation (GPS/Galileo/BeiDou) multi-band (L1/L2/L5) SDR by utilizing Ettus USRP N210. The signal reception module of the developed SDR includes down-conversion, analog-to-digital conversion, signal acquisition, and tracking. The down-conversion module is designed based on the super-heterodyne method fitted for MHz sampling. The signal acquisition module performs PRN code generation and FFT operation and the signal tracking module implements delay/phase/frequency locked loops only by software. In general, it is difficult to sample entire main lobe components of L5 band signals due to their higher chipping rate compared with L1 and L2 band signals. Experiment result shows that it is possible to acquire and track the under-sampled signals by the developed SDR.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권1호
• /
• pp.1-8
• /
• 2017

In this study, to design a multi-GNSS receiver using single RF front-end, the receiving performances for various frequency plans were evaluated. For the fair evaluation and comparison of different frequency plans, the same signal needs to be received at the same time. For this purpose, two synchronized RF front-ends were configured using USRP X310, and PC-based software was implemented so that the quality of the digital IF signal received at each front-end could be evaluated. The software consisted of USRP control, signal reception, signal acquisition, signal tracking, and C/N0 estimation function. Using the implemented software and USRP-based hardware, the signal receiving performances for various frequency plans, such as the signal attenuation status, overlapping of different systems, and the use of imaginary or real signal, were evaluated based on the C/N0 value. The results of the receiving performance measurement for the various frequency plans suggested in this study would be useful reference data for the design of a multi-GNSS receiver in the future.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.149-156
• /
• 2011

This paper reveals a distance estimation algorithm based on multi-code ultrasonic and wireless sensor network. For measuring the distances among the sensor nodes, each ultrasonic transmitter transmits multi-code ultrasonic signal simultaneously. Receivers use cross correlation method to separate the coded signals. The information of measured distances is broadcasted to each sensor node by wireless sensor network. The wireless sensor network measures the distance among the sensor nodes using the received signal strength of the broadcasting. The multi-code ultrasonic have a limitation of measurable distance. And the received signal strength is affected from an environment. This paper measures a distance using ultrasonic and a received signal strength in short range. These measured data are applied to the least square estimation algorithm. By the expansion of the fitting curve, a distance measurement in long range using the received signal strength is compensated. The coupled system reduce the error to an acceptable level.

• 대한전자공학회논문지
• /
• 제27권12호
• /
• pp.1878-1888
• /
• 1990

In this paper, the input-output interconnection method of the multi-valued signal processing circuit using perfect Shuffle technique and Kronecker product is discussed. Using this method, the design method of circuit of the multi-valued Reed-Muller expansions(MRME) to be used the multi-valued signal processing on finite field GF(p**m) is presented. The proposed input-output interconnection method is shown that the matrix transform is efficient and that the module structure is easy. The circuit design of MRME on FG(p**m) is realized following as` 1) contructing the baisc gates on GF(3) by CMOS T gate, 2) designing the basic cells to be implemented the transform and inverse transform matrix of MRME using these basic gates, 3) interconnecting these cells by the input-output interconnecting method of the multivalued signal processing circuits. Also, the circuit design of the multi-valued signal processing function on GF(3\ulcorner similar to Winograd algorithm of 3x3 array of DFT (discrete fourier transform) is realized by interconnection of Perfect Shuffle technique and Kronecker product. The presented multi-valued signal processing circuits that are simple and regular for wire routing and posses the properties of concurrency and modularity are suitable for VLSI.

• 한국컴퓨터정보학회논문지
• /
• 제15권3호
• /
• pp.37-43
• /
• 2010

본 논문에서는 비교적 간단한 설계기법과 효율적인 디자인 기술을 사용하여 방송용 8.4" LCD 모니터를 개발하였다. 소형화 기술, 혼성 비디오신호 처리기술, 하나의 포트에 다종의 HD 시그널을 구현하는 기술, 기판제작에 있어서의 디지털 신호와 아날로그 신호의 분리기법과 타겟 보드에 맞는 오디오 신호 처리기술 등이 본연구의 주 연구 대상이다. 제안된 다용도의 8.4" LCD 모니터는 방송용으로 고안하여 제작하였으므로 해당 분야에서의 활용에 있어서의 효율이 기대된다.

• 한국표면공학회지
• /
• 제45권1호
• /
• pp.43-52
• /
• 2012

Recently, it has been developed for Eco-environment, Super light, Multi-functional nano materials. As needed mobile parts in Smart phone or TV, computer, information communication for high pass signal, multi-function, Magnetic thin film materials have been developed. As last, magnetic powder, sintered and sputtering parts were thick and low purity than electroplating layer, low pass signal and noise were resulted, vibrated TV screen. Because chemical complex temperature was high and ununiform surface layer, it has been very difficult for data pass in High Frequency (GHz) area. Large capacity data pass is used to GHz. Above GHz, signal pass velocity is dependent on Skin Effect of surface layer. If surface layer is thick or ununiform, attachment is poor, low pass signal and cross talk, noise are produced and leaked. It has been reported technical trend of Electrochemically plating and Surface treatment of Metal, Polymer, Ceramic etc. by dispersion/complex for Multi functional nano-magnetic material in this paper.

• 대한전자공학회논문지
• /
• 제26권9호
• /
• pp.1444-1452
• /
• 1989

This paper describes the implementation of a real time fetal ECG monitoring system in which an adaptive multi-channel noise canceller is realized using the Texas Instruments TMS32020 progrmmmable ditital signal processor. An ECG signal from the electrode placed on the mother's abdomen and three ECGs from those on the chest are applied as the desired signal and the referened inputs, respectively, of the multi-channel filter. The coefficients of the filter are updated using the LMS algorithm such that the output of the multi-channel filter copies the maternal ECG embedded in the abdominal ECG. The enhanced fetal ECG is obtained by subtracting the filter output from the abdominal ECG, and the difference signal is recorded. Both off-line and on-line experimental results are presented to verify the effectiveness of the parameters for the digital signal processing algorithms and the prototype system.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.23-28
• /
• 2005

An airborne radar is an essential aviation electronic system of the helicopter to perform various missions in all-weather environments. This paper presents the results of the design and implementation of the airborne pulse doppler radar signal processor using high multi-DSP for the multi-function radar capability such as short-range, midium-range, and long-range depending on the mission of the vehicle. Particularly, the radar signal processor is developed using two DSP boards in parallel for the various radar signal processing algorithm. The key algorithms include LFM chirp waveform-based pulse compression, MTI clutter filter, MTD processor, adaptive CFAR, and clutter map. Especially airborne moving clutter Doppler spectrum compensation algorithm such as TACCAR is implemented for the multi-mode airborne radar system. The test results shows the good Doppler spectral separation for the clutter and the moving target in the flight test environment using helicopter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.27-30
• /
• 2004

OFDMA is considered as one of the major candidates for broadband wireless access. The OFDMA signal is usually coherently demodulated, requiring the channel estimation which can be estimated using a known pilot signal. In multi-cell environment, the performance of channel estimation is mainly limited by intercell interference. It is desirable to use a pilot signal that can estimate the channel information robust to the intercell interference in the OFDMA uplink system. In this paper, we consider two types of pilot signal applicable to multi-cell OFDMA uplink systems: One is time-multiplexed pilot signal and the other is code­multiplexed pilot signal. Simulation results show that the code-multiplexed pilot is suitable for low mobility environment and time-multiplexed pilot is suitable for high mobility environment.