• 제목/요약/키워드: Multi-Reference

검색결과 943건 처리시간 0.033초

원자력발전소 다채널 신호의 온라인 진단방법 비교 (Comparison of On-Line Diagnotic Methods on Multi-Channel Signals in Nuclear Plant)

  • 이광대;양승옥
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
    • /
    • pp.705-708
    • /
    • 2003
  • In this paper, we have evaluated the methods to generate the reference signal for the diagnosis of multi-channel signals. The channel signal integrity can be known by the difference between the reference signal and each channel value. The generation method of reference signal is important in the diagnosis of multi-channel measurement system. The continuous weighting average method rejects the abnormal signal using weighting method and makes the reference signal using sumation of all channel values. This gives the simple and reasonable reference signal. The principle component analysis, one of the multivariate analysis methods, and the neural network method give the reliable reference signal by using signal models, and learning algorithm. Two methods can make the reliable reference if all signals are normal, but any signal having the drift have an effect on the reference.

  • PDF

차량위치추적 시스템을 위한 다중 기준국 Inverted DGPS 시스템 (Multi-Reference Inverted DGPS System for Automatic Vehicle Location System)

  • 홍진석;한승재;지규인;이영재;이장규;최홍석
    • 제어로봇시스템학회논문지
    • /
    • 제5권1호
    • /
    • pp.79-87
    • /
    • 1999
  • For its simplicity and cost effectiveness in implementation, the Inverted DGPS is well suited for some specific applications like automatic vehicle location systems, where the monitoring station needs accurate position of the vehicles in the street. In the Inverted DGPS, the user sends its GPS position and associated satellite informations to the reference station, and the corrections are made at the reference station to get differentially corrected user position. A fundamental requirement in IDGPS is that the user and the reference station must use the same satellites when the corrections are made. But in practice, it is not often satisfied. Inverted DGPS is also suffered from performance degradation as the baseline become large like DGPS. IDGPS system using multi-reference station can resolve this problem. In this paper a simple multi-reference IDGPS algorithm is proposed and some experiments and analysis are peformed. Experiment results show that IDGPS can achieve the positioning performance as accurate as the DGPS can provide.

  • PDF

다중 기준틀을 사용한 회전 구조물의 진동해석 (Vibration Analysis of Rotating Structures Employing Multi-Reference Frames)

  • 김정민;유홍희
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 춘계학술대회논문집
    • /
    • pp.814-819
    • /
    • 2004
  • In this paper, a modeling method for the vibration analysis of rotating structures employing multi-reference frames is presented. The geometric stiffening effect that results from centrifugal inertia force is considered. In most previous studies single reference frame has been employed for the analysis. In the present study, a modeling method employing multi-reference frames is presented, and the effects of employing multi-reference frames on the analysis accuracy are investigated through solving numerical examples.

  • PDF

다중 기준틀을 사용한 회전 구조물의 진동해석 (Vibration Analysis of Rotating Structures Employing Multi-reference Frames)

  • 김정민;유홍희
    • 한국소음진동공학회논문집
    • /
    • 제14권10호
    • /
    • pp.983-989
    • /
    • 2004
  • In this paper, a modeling method for the vibration analysis of rotating structures employing multi-reference frames is presented. The geometric stiffening effect that results from centrifugal inertia force is considered. In most previous studies single reference frame has been employed for the analysis. In the present study, a modeling method employing multi-reference frames is presented, and the effects of employing multi-reference frames on the analysis accuracy are investigated through solving numerical examples.

보와 쉘로 구성된 회전 구조물의 다중 기준틀을 사용한 진동해석 (Vibration Analysis of Rotating Structures Composed of Beams and Shells Employing Multi-Reference Frames)

  • 김정민;유홍희
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 추계학술대회논문집
    • /
    • pp.670-676
    • /
    • 2004
  • In this paper, a modeling method for the vibration analysis of rotating structures composed of beams and shells employing multi-reference frames is presented. The rotary inertia effect and the geometric stiffening effect that results from centrifugal inertia force we considered for beams and shells with lumped mass model. In most previous studies, single reference frame has been employed for the vibration analysis. In the present study, a modeling method employing multi-reference frames is presented and the effects of employing multi-reference frames on the analysis accuracy are investigated through solving numerical examples.

  • PDF

Development of Linearly Interpolated PRC Regenerating Algorithm to Improve Navigation Solution using Multi-DGPS Reference Stations

  • Oh, Kyung-Ryoon;Kim, Jong-Chul;Nam, Gi-Wook
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.1618-1622
    • /
    • 2004
  • In this paper, the linearly interpolated PRC(Pseudo Range Correction) regenerating algorithm was applied to improve the DGPS(Differential Global Positioning System) positioning accuracy at user's spot by using the various PRC information obtained from multi-DGPS reference stations. The PRC information of each GPS satellite is not varying rapidly; it is possible to assume that the variation of PRC information of each GPS satellite is linear. So the linearly interpolated PRC regenerating algorithm can be applied to improve the DGPS positioning accuracy at user's spot by using the various PRC information obtained from multi-DGPS reference stations. To test the performance of the linearly interpolated PRC regenerating algorithm, maritime DGPS reference stations' PRC data was used in RTCM format. 11 maritime DGPS reference stations are in service providing DGPS information to public since 1999. Two set of 3 DGPS reference stations are selected to compare the performance of the linearly interpolated PRC regenerating algorithm. The DGPS positioning accuracy was dramatically improved about 40%. Linearly interpolated PRC regenerating algorithm adopted multi-channel DGPS receiver will be developed in near future.

  • PDF

Modal Analysis of Rotating Beam Structures Having Complex Configurations Employing Multi-Reference Frames

  • Kim, Jung-Min;Yoo, Hong-Hee
    • Journal of Mechanical Science and Technology
    • /
    • 제20권1호
    • /
    • pp.66-75
    • /
    • 2006
  • A modeling method for the modal analysis of rotating beam structures having complex configurations employing multi-reference frames is presented in the present study. In most structural analysis methods, single reference frame is employed for the modal analysis. For simple structures such as single beam or single plate, the method of employing single reference frame usually provides rapidly converging accurate results. However, for general structures having complex configurations, such a method provides slowly converging, and often erroneous, results. In the present study, the effects of employing multi-reference frames on the convergence and the accuracy of the modal analysis of rotating beam structures having complex configurations are investigated.

움직임 벡터와 참조 프레임간의 거리를 이용한 고속 다중 참조 프레임 움직임 추정 (Fast Multi-Reference Frame Motion Estimation Algorithm Using a Relation of Motion Vector with Distance of Each Reference Frame)

  • 변주원;최진하;김재석
    • 대한전자공학회논문지SP
    • /
    • 제47권2호
    • /
    • pp.69-76
    • /
    • 2010
  • 본 논문에서는 새로운 고속 다중 참조 프레임 움직임 추정 알고리즘을 제안한다. 제안된 알고리즘은 참조 프레임간의 거리와 움직임 벡터 간의 선형 관계를 이용하여 검색영역을 줄인다. 새로운 알고리즘은 0번 참조 프레임과 1번 참조 프레임에서는 전영역 움직임 추정을 사용한 후, 2번 참조 프레임, 3번 참조 프레임, 4번 참조 프레임에서는 0번 참조 프레임과 1번 참조프레임에서의 움직임 추정의 결과를 사용하여 검색 영역을 최소화 한다. 제안된 알고리즘은 문턱값을 사용하지 않기 때문에 하드웨어 구현과 프로세싱 스케줄을 지정하는 것이 용이하고 많은 연산량을 줄일 수 었다. 이러한 몇 가지 특징으로 인하여 제안된 알고리즘은 다중 참조 프레임 움직임 추정기의 하드웨어 구현에 용이하다. 시뮬레이션 결과는 제안된 알고리즘의 PSNR 감소와 bitrate의 증가가 기존의 고속 다중 창조 프레임 움직임 추정 알고리즘에 비해서 좋은 성능을 나타내고 있고, 연산량은 기존의 5장의 참조 프레임을 사용하는 전영역 검색 방법에 비해서 52.5%의 감소를 나타낸다.

Design of a Fast Multi-Reference Frame Integer Motion Estimator for H.264/AVC

  • Byun, Juwon;Kim, Jaeseok
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제13권5호
    • /
    • pp.430-442
    • /
    • 2013
  • This paper presents a fast multi-reference frame integer motion estimator for H.264/AVC. The proposed system uses the previously proposed fast multi-reference frame algorithm. The previously proposed algorithm executes a full search area motion estimation in reference frames 0 and 1. After that, the search areas of motion estimation in reference frames 2, 3 and 4 are minimized by a linear relationship between the motion vector and the distances from the current frame to the reference frames. For hardware implementation, the modified algorithm optimizes the search area, reduces the overlapping search area and modifies a division equation. Because the search area is reduced, the amount of computation is reduced by 58.7%. In experimental results, the modified algorithm shows an increase of bit-rate in 0.36% when compared with the five reference frame standard. The pipeline structure and the memory controller are also adopted for real-time video encoding. The proposed system is implemented using 0.13 um CMOS technology, and the gate count is 1089K with 6.50 KB of internal SRAM. It can encode a Full HD video ($1920{\times}1080P@30Hz$) in real-time at a 135 MHz clock speed with 5 reference frames.

다중기준국 방식을 이용한 GPS 반송파 상대측위 정확도 향상 (Improvement of Relative Positioning Accuracy with GPS Carrier Phase Using Multi-Base Station)

  • 이재원
    • 한국측량학회지
    • /
    • 제26권6호
    • /
    • pp.617-624
    • /
    • 2008
  • 일반적으로 단일기준국을 이용하는 실시간 동적(Real Time Kinematic) GPS는 무선모뎀을 통해 반송파 오차보정량을 이동국으로 전송하여 현장에서 바로 고정밀의 위치를 결정할 수 있다. 하지만 단일기준국 방식은 각 위성마다의 시간대별 반송파 측정값을 지속적으로 제공해야 하며, 전송장해와 모뎀간의 거리 따른 증가 등으로 위치정확도가 저하되는 단점이 있다. 본 논문은 이러한 단점을 보완하기 위해 3대 이상의 다중기준국을 활용한 네트워크 기반의 GPS 반송파 상대측위기술을 구현하였으며, Visual C++로 제작된 실시간 모니터링 프로그램을 이용하여 RTK 네트워크를 구성하였다. 네트워크 구성에서 얻어지는 다중기준국의 오차보정량 가운데 최적의 값을 자동으로 선택하고, GPS buoy 이동국에 적용하여 해수면 관측을 수행하였으며, 이를 통해 얻어진 해수면 변동량을 단일기준국과 비교, 분석하여 결과를 도출하였다.