• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권9호
• /
• pp.468-474
• /
• 2003

This paper describes the development of an open frame type high power density switching converter. It is based on the active clamp forward converter with synchronous rectifier, and packaged by using the open frame and multi-layer printed circuit board (PCB) technology to achieve the higher power density. Furthermore, the windings of transformer and inductor are also realized by multi-layer PCB so that it also contributes to achieve higher power density. Through the experiment on the prototype converter of 50[W], it is confirmed that power density of 50[W/i$n_3$] and maximum efficiency of over 91[%] are obtained.

• 대한전자공학회논문지SP
• /
• 제45권6호
• /
• pp.1-8
• /
• 2008

이 논문은 다중참조 및 가변블록 움직임 추정의 연산량을 효율적으로 줄이기 위해 세 가지 참조영상 선택 방법들을 소개한다. 제안된 RSP (Reference Selection Pass) 방법은 참조영상 선택의 부가적인 연산을 최소화 할 수 있고 MFS (Modified Frame Selection) 방법은 참조영상 선택 과정 중 영상의 움직임을 고려하여 참조영상 선택 시 연산 횟수를 기존 방식에 비해 17% 감소시킨다. 또한 TPRFS (Two Pass Reference frame Selection) 방법은 H.264/AVC에서 요구하는 가변블록 움직임 추정을 지원하기 위한 부가적인 연산을 블록 크기에 따라 선택되는 참조영상의 특성을 이용하여 최소화 한다. 실험 결과 제안한 방식은 기존의 방식에 비해 화질의 열화 없이 50% 이상의 움직임 추정의 연산량을 감소시킬 수 있다. 또한 제안한 참조영상 선택 방법은 움직임 추정의 주된 연산인 블록정합 단계와 별개로 수행이 되기 때문에 기존의 어떠한 단일참조 고속 움직임 탐색 방법과도 같이 사용되어 효율적으로 다중참조 및 가변블록 움직임 추정 연산을 지원 할 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.378-383
• /
• 2008

Bogie frame of the locomotive is an important structural member for the support of vehicle loading. A lot of study has been carried out for the prediction of the structural integrity of the bogie frame in experimental and theoretical domains. The objective of this paper is to estimate the structural integrity of the bogie frame. Strength analysis has been performed by finite element analysis. From these analysis, stress concentration areas were investigated. For evaluation of the loading conditions, dynamic stress were measured by using strain gage. It has been found that the stress and strain due to the applied loads were multi-axial condition according to the location of strain gage. The fatigue strength evaluations of the bogie frame are performed to investigate the effect of the multi-axial load through the employment of the critical plane approach.

• Journal of the Korean Wood Science and Technology
• /
• 제19권3호
• /
• pp.45-52
• /
• 1991

To investigate opportunities for wood frame housing and to activate wood frame house construction, trends of construction activities. preference about housing, and building codes related to wood frame housing were discussed. And two models of wood frame house were developed and construction cost was analyzed to compare with comparative masonry houses. The results obtained were as follows: 1. While 77.8% of people prefer single-family houses, majority of people(74.9%), ironically, possess multi-family houses such as apartments Wood work cost was ratio of 4% of total building cost. while wood material cost accounted merely for 11 % out of total building material cost. 2. Building code was not major barrier to residential house at height under 13m. The building code regulated major structural member and family boder wall of multi-family house to be built with fire retardant material. 3. The proper wood frame house was analyzed of town house or villa type locating in suburban of big city with hot ondol system for the upper middle class. 4 There was no difference in construction cost between western style wood frame house and comparable masonry house, but construction cost for Korean style wood frame house is 27% higher than that of comparable masonry house. It was necessary to reduce materials and cost down by prefabrication technique for both style of wood frame house.

• 한국물환경학회지
• /
• 제20권4호
• /
• pp.307-312
• /
• 2004

This study was focused on experiment for the separation and concentration process of Cu(II), Zn(II) solution with the variation of applied pressure and concentration using reverse osmosis plate and frame modules. Rejection coefficient and degree of concentration for Cu(II) component using single and multi-stage reverse osmosis process were showed 96.3~97.8%, 0.044~0.191(in single-stage), 96.3~98.4%, 0.400~2.264(in multi-stage) within the range of experimental condition, respectively. Those of Zn(II) were 93.3~97.1%, 0.019~0.395(in single-stage), 96.3~98.2%, 0.365~1.454(in multi-stage), respectively. Degree of concentration of multi-stage were higher than those of single-stage. Heavy metal[Cu(II), Zn(II)] separation was very efficient in using reverse osmosis plate and frame type modules. Separation efficiency for a mixed solution Cu(II) and Zn(II) was higher than those of each one of Cu(II) and Zn(II).

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권5호
• /
• pp.430-442
• /
• 2013

This paper presents a fast multi-reference frame integer motion estimator for H.264/AVC. The proposed system uses the previously proposed fast multi-reference frame algorithm. The previously proposed algorithm executes a full search area motion estimation in reference frames 0 and 1. After that, the search areas of motion estimation in reference frames 2, 3 and 4 are minimized by a linear relationship between the motion vector and the distances from the current frame to the reference frames. For hardware implementation, the modified algorithm optimizes the search area, reduces the overlapping search area and modifies a division equation. Because the search area is reduced, the amount of computation is reduced by 58.7%. In experimental results, the modified algorithm shows an increase of bit-rate in 0.36% when compared with the five reference frame standard. The pipeline structure and the memory controller are also adopted for real-time video encoding. The proposed system is implemented using 0.13 um CMOS technology, and the gate count is 1089K with 6.50 KB of internal SRAM. It can encode a Full HD video ($1920{\times}1080P@30Hz$) in real-time at a 135 MHz clock speed with 5 reference frames.

• 산업공학
• /
• 제12권2호
• /
• pp.174-179
• /
• 1999

This paper describes the development of low cost, miniaturized multi-function image splitter for an unmanned guard system. The essential equipments of an image splitter system consist of a video system which displays in one screen images inputted by several cameras, a frame switcher which records each image sequentially in VTR, and TBC(Time Base Control) system which prevents image flickering during image switching. Currently, the price of similar system on the market is high, system management and repair are difficult, and bulky space is required. Futhermore, since currently available frame switcher can record only 30frame/sec, if eight cameras are installed, each camera image is recorded at the low speed of 3.75frame/sec, and consequently skip some images which may be vital for legal evidence. In this research, we have solved the problem of low speed recording by recording the video screen of splitted images at 30frame/sec and zooming each image when play back.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.520-523
• /
• 2009

The drive towards lowering costs and increasing frame rates results in new panel designs and thereby new photomasks designs. One common way to reduce cost is to reduce the number of production steps. For this multi tone photomasks (MTM) are needed. MTMs contain more information and increases photomask placement requirements. Increasing frame rates lead to shrinking geometries. The combination of HTM and shrinking geometries drastically increases the requirements imposed on the pattern generators used to print the photomasks. New methods are therefore needed to enable future photomask manufacturing. This paper introduces three advanced image quality enhancing methods.

• 건축사
• /
• 11호통권82호
• /
• pp.22-25
• /
• 1975

The aim of this study is the introduction of simplified method for the design stress analysis of multi-span gable frame structures with crane supports. Under the author's assumptions made previously for the same structures of single span, simplified stress analysis and exact computer analysis are excuted for some multi-span sample structures. Comparing the results of both stress analysis and with some modifications, a feasible simplified method for the design stress analysis of multi-span gable frame structures with crane supports is established.

• 한국통신학회논문지
• /
• 제31권9A호
• /
• pp.837-843
• /
• 2006

WPAN환경에서 고속 저속 네트워크를 위한 표준 IEEE 802.15.3과 IEEE 802.15.4이 설계되었다. 현재 WPAN 표준에서 제시하는 MAC 프로토콜의 다중 접근 방식은 CSMA방식과 TDMA방식을 분리하여 결합한 방식이다. TDMA부분에서는 PNC(Piconet Coordinator)에 의해 가변적인 길이의 timeslot이 각 station에 할당된다. 그리고 각 timeslot내에는 여러 개의 데이터 패킷이 전송 가능한 multi-frame TDMA구조를 이루고 있다. 하지만 표준에서 정의하는 다중 접근 방식은 VBR (Variable Bit Rate)과 같이 데이터 전송률의 변화가 빈번한 데이터 서비스를 효율적으로 지원하기 어렵다. 이러한 특성의 데이터 트래픽에서는 superframe 내에 많은 수의 idle timeslot을 발생시키므로 시스템의 throughput을 감소시키고 delay를 증가시키게 된다. 본 논문에서는 가상 슬롯 기반의 다중 접근 방식인 VSMA(Virtual Slot Multiple Access)를 제안한다. 제안하는 기법은 multi-frame TDMA의 환경에서 성능을 향상시킬 수 있는 기법으로서 가상 슬롯을 할당 받은 station은 높은 접근 우선 순위를 갖고 그 밖의 station은 낮은 접근 우선 순위를 갖게 하여 채널을 효과적으로 사용할 수 있는 기법이다. 다양한 환경에서의 시뮬레이션을 통해 본 논문에서 제안한 기법이 효율적인 채널 사용을 통해서 향상된 성능을 보인다는 것을 증명하였다.