• Earthquakes and Structures
• /
• 제14권6호
• /
• pp.537-549
• /
• 2018

Using vertical links in eccentric braced frames is one of the best passive structural control approaches due to its effectiveness and practicality advantages. However, in spite of the subject importance there are limited studies which evaluate the seismic reliability and response reduction factor (R-factor) in this system. Therefore, the present study has been conducted to improve the current understanding about failure mechanism in the structural systems equipped with vertical links. For this purpose, following definition of demand and capacity response reduction factors, these parameters are computed for three different buildings (4, 8 and 12 stories) equipped with this system. In this regards, pushover and incremental dynamic analysis have been employed, and seismic reliability as well as multi-level response reduction factor according to the seismic demand and capacity of the frames have been derived. Based on the results, this system demonstrates high ductility and seismic energy dissipation capacity, and using the response reduction factor as high as 8 also provides acceptable reliability for the frame in the moderate and high earthquake intensities. This system can be used in original buildings as lateral load resisting system in addition to seismic rehabilitation of the existing buildings.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1145-1148
• /
• 1998

New capacitance modeling and transient analysis for multi-layer interconnects with shielding effect are presented. The upper layer capacitances with under-layer shielding lines are represented by introducing a filling factor η which can be defined as the ratio of upper-layer line length to the total under-layer line width. The upper-layer effective self capacitances considering two extreme cases which the underlayer metals are assumed as a ground or as a Vdd are modeled. The signal transient analysis with shielding effect model is performed.

• 대한간호학회지
• /
• 제48권4호
• /
• pp.419-431
• /
• 2018

Purpose: The purpose of this study was to develop and establish the psychometric properties of a clinical nursing competency evaluation tool to be utilized by clinical preceptors. Methods: The initial items were identified through in-depth literature review and field interviews based on a hybrid model. Content validation of the items was evaluated through three rounds of content validity testing. Participants were 34 clinical preceptors and 443 nursing students participating in clinical practice. Data were analyzed using exploratory and confirmatory factor analysis, convergence and discriminant validity, internal consistency and inter-rater reliability. Results: The final scale consisted of 23 items and four factors, fundamental nursing skills performance, critical thinking skills based on the nursing process, basic nursing knowledge, and professional attitude; these factor explained 69.7% of the total variance. The analysis with multi-trait/multi-item matrix correlation coefficients yielded 100.0% and 95.7 % convergence and discriminant validity, respectively. Cronbach's alpha for the total items was .95. The four subscale model tested by confirmatory factor analysis was satisfactory. Inter-rater reliability ranged from .912 to .967. Conclusion: This scale was found to be a reliable and valid instrument that clinical preceptors can apply for evaluating the clinical nursing competency of nursing students in clinical settings.

• 대한가정학회지
• /
• 제45권1호
• /
• pp.51-61
• /
• 2007

The purpose of this study was to examine if multi-shop's store image affects store loyalty and brand switching. Two hundred fifty females and males who have purchased fashion products in multi-shop participated in this survey. For data analysis, descriptive statistics, factor analysis, Pearson's correlation and regression analysis were used for this study. The results were as followed. First, respondents' the most favorite multi-shop was MUE, followed by Boon the shop and ABC mart. Second, store image was classified into four factors such as store atmosphere, service of store, store recognition and product variety. Store loyalty was classified into five factors such as emotional relationship, pursue of novelty, trust about salesperson, satisfaction about service, and active loyalty. Third, result revealed that 'product variety' and 'store atmosphere', 'store recognition', 'service of store' accounted for 39.6% of the explained varience in store loyalty, and 'store recognition' accounted for 4% of the explained varience in brand switching behavior, while 'trust about salesperson', 'pursue of novelty' accounted for 5% of the explained varience in brand switching behavior. Based on these results, multi-shop's fashion marketing strategy would be suggested.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.632-637
• /
• 2011

A new tooth profile which is adjusted on the amount of addendum modification factor is proposed for reducing vibration and noise of gears. The transmission error of the new profile can be designed more uniformly than that of the standard involute profile. The basic concepts of tooth profile modification are to reduce the load in contact area and to find the appropriate profile modification factor for operation condition. In this study, gears were estimated to constructive safety of bending strength and contact strength durability by using ROMAX program, and were compared with results by design formula of AGMA standard.

• 건설안전기술
• /
• 통권51호
• /
• pp.93-105
• /
• 2010

The object of this study is to understand the psychological factor of the worker on safety and recommend experimental factor of safety education program. The following are the methods of this study. We analyzed the statistical data from survey to workers(N=139) about the psychological factor on safely. The survey consisted of 34 questions about 4 factors like private external characteristic, psychological characteristic, characteristics on behavior, and experience and reason of disaster. As the result of the analysis of the multi regression model on the base of correlation of each of the major factors, psychological health, effort on practicing, and satisfaction on their life were the variables with high influence on the safety mind of workers. So, it is good safety strategy for effective working to maintain healthy life with optimistic minds, and try to practice actively as usual. After considering the result, for the development of safety education program for working, we have to consider psychological factors of our workers that influence their safety and try to improve the experimental education opportunity, and it will be effective.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.88-89
• /
• 2017

This paper investigates the design of multi-winding coupled inductor for minimum inductor current ripple in rapid traction battery charger systems. Based on the general circuit model of multi-winding coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor which corresponds to a minimum inductor ripple current becomes -(1/n-1), i.e. a complete inverse coupling without leakage inductance, as the steady-state duty ratio operating point approaches 1/n, 2/n, … or (n1)/n. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the steady-state duty ratio operating point approaches either zero or one.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.8-14
• /
• 2019

Most of the data envelopment analysis (DEA) models evaluate the relative efficiency of a decision making unit (DMU) based on the assumption that inputs in a specific period are consumed to produce the output in the same period of time. However, there may be some time lag between the consumption of input resources and the production of outputs. A few models to handle the concept of the time lag effect have been proposed. This paper suggests a new multi-period input DEA model considering the consistent time lag effects. Consistency of time lag effect means that the time delay for the same input factor or output factor are consistent throughout the periods. It is more realistic than the time lag effect for the same output or input factor can vary over the periods. The suggested model is an output-oriented model in order to adopt the consistent time lag effect. We analyze the results of the suggested model and the existing multi period input model with a sample data set from a long-term national research and development program in Korea. We show that the suggested model may have the better discrimination power than existing model while the ranking of DMUs is not different by two nonparametric tests.

• 한국수자원학회논문집
• /
• 제45권11호
• /
• pp.1131-1141
• /
• 2012

본 연구에서는 댐 용수공급능력에 영향을 미치는 요인들을 요인분석 통계기법을 사용하여 추출하였으며, 그 결과를 이용하여 댐 용수공급능력 추정을 위한 다중회귀모형을 개발하였다. 21개 다목적댐과 12개 생공용수전용댐을 대상으로 하였으며, 다목적댐과 생공용수전용댐으로 구분하여 요인분석을 수행하였다. 댐 용수공급능력에 영향을 미치는 변수로 유역면적, 유입량, 유효저수량, 생공용수량 등급, 농업용수량 등급, 하천유지유량 등급, 하천관리 등급, 평균강우량 등급을 선정하였다. 변수들의 상관계수 행렬점검, Bartlett의 구형성 점검, KMO 표본적합도 점검을 실시하여 변수들의 요인분석에 대한 적합성을 확인하였다. 변수들은 다목적댐의 경우 3개 요인, 생공용수전용댐의 경우 2개 요인으로 분류되었으며, 요인들을 Varimax법을 사용하여 회전시켰다. 요인분석 결과는 댐 용수공급능력에 영향을 미치는 변수들이 합리적으로 선정되었고, 이들이 요인으로 적절하게 분류되었음을 보여주었다. 요인점수를 설명변수로 사용하여 연간용수공급량을 추정할 수 있는 다중회귀모형을 개발하였으며, 개발된 모형의 정확성을 평가하고 적용방법을 제시하였다. 결론적으로 댐 용수공급능력에 영향을 미치는 것으로 파악된 변수 및 요인은 댐 계획 및 설계에 유용하게 활용될 수 있을 것으로 사료된다.

• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.38-45
• /
• 2009

Recently, LCD Backlight Unit is being replaced from cold cathode fluorescent lamp(CCFL) to external electrode fluorescent lamp(EEFL) because the EEFL has high energy efficiency and long life. Also, it can reduce energy consumption and weight. So far, external electrode ring for EEFL is produced by sheet metal press forming process. Therefore it had low precision and much material loss. To solve these problems, Multi-Forming process that has five step forming process was invented. However, low productivity is another barrier. Product speed that is controlled by the rotational speed cannot be increased due to the unsatisfied design specification. The reason is that the gap between rolled two edge parts of the sheet plate is tightly inspected. Regarding this factor, the understanding of forming behavior to each process is inevitable. This paper describes the CAE analysis of the multi-forming process by PAM-STAMP.