• 방송공학회논문지
• /
• 제19권1호
• /
• pp.3-13
• /
• 2014

본 논문은 매우 빠른 속도로 개발 및 보급되고 있는 개인형 클라우드 서비스의 이용에 관한 탐색적 연구이다. 특히, 이용자 특성과 이용 행태에 주목하여, 플랫폼 및 콘텐츠 연계이용이 클라우드 서비스 이용에 미치는 영향을 실증적으로 검증하였다. 연구결과, 첫째 클라우드 서비스 이용은 사진, 음악, 음원과 같은 데이터 용량이 작은 콘텐츠를 중심으로 주로 연계이용되었다. 둘째, 클라우드 서비스 이용에 있어 '플랫폼 연계이용'이 제일 영향력 있는 요인으로 밝혀졌으며, SNS 이용, 이메일 이용, 개인의 혁신성 등도 통계적으로 유의미하게 나타났다. 본 연구는 개인형 클라우드 서비스에 대한 이론적 분석에 있어 선도적인 연구로서, 클라우드 서비스의 개발 및 관련 산업 진흥 정책의 수립에 있어 이용자 특성과 이용 행태의 고려가 필요하다는 함의를 제공하고 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.854-856
• /
• 2014

일인 다기기 시대에 맞추어 스마트 기기로 다양한 가전제품과 전자기기를 스마트 디바이스를 이용하여 제어 가능하게 출시하고 있다. 또한, 청소로봇과 냉장고, 에어컨, TV 등의 제품 수가 빠르게 증가하고 있으며 이러한 기기들을 이용하여 DLNA(Digital Living Network Alliance) 시스템을 구축하고 있다. 그리고 국내외에서 IoT(Internet Of Things)나 Alljoyn 같은 기술들을 개발 및 제공하고 있다. 하지만 현재 사용하고 있는 가전제품이나 전자기기들은 운영체제가 설치되어있는 제품보다 설치되어있지 않은 제품이 많다. 또한, 스마트 가전제품을 사용하지 않는 사용자는 스마트 가전제품 보다는 기존의 전자제품을 구입하는 경우가 더 많이 발생한다. 본 논문에서는 모바일 기기를 사용하여 사용자가 원하는 데이터를 수치화하고 아두이노 보드에 전송하여 운영체제가 없는 기존의 가전제품도 스마트 기기와 같은 제어를 할 수 있도록 하는 시스템을 제안하고 구현한다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2005년도 ISMP
• /
• pp.111-129
• /
• 2005

Pop provides OEMs and EMS with a platform to cost effectively expand options for logic + memory 3D integration - Expands device options by simplifying business logistics of stacking - Integration controlled at the system level to best match stacked combinations with system requirements - Eliminates margin stacking and expands technology reuse - Helps manage the huge cost impacts associated with increasing demand for multi media processing and memory. PoP is well timed to enable and leverage: - Mass customization of systems for different use (form, fit and function) requirements o Bband and apps processor + memory stack platforms - Logic transition to flip chip enables PoP size reduction o Area and height reduction. Industry standardization is progressing. Amkor provides full turn-key support for base package, memory package and full system integration.

• 디지털융복합연구
• /
• 제4권1호
• /
• pp.31-41
• /
• 2006

This article introduces developing trends of an 'Ubiquitous Interface' as an access method for use of various network resources, such as public wireless networks and un-licensed wireless networks in ubiquitous sensor network environments, without troublesome settings or operations by users. 'Ubiquitous Interface' is a relatively wide sense meaning not only physical interface of specified device or between processors, but anything method for access USN. These 'Ubiquitous Interface' able to provide seamless services that adapt autonomously to the user's movements and changes in the state of wireless resources. Recently, strongly recommended current technologies are RFID, NFC, Multi-mode mobile terminal, UMA mobile terminal and Wearable computer as a future ubiquitous interface. These technologies are have to have flexibility and multiple physical communication channels for seamless service hand over and serve easy connection at huge USN to user. Also, they have to must have flexible software structure. Finally, through the 'Ubiquitous Interface', we will be experience of seamless communication and realize a real liberty of communication.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.200-202
• /
• 2004

This paper deals with the real-time monitoring and control system using PC, PDA(Win CE embedded device) and PCS(based BREW platform). The camera attached to the server captures the moving target, and the captured frame of color image is encoded in JPEG for image compression at the server. The client(PC, PDA, PCS) receives the image data from the remote server and the received image is decoded from decompression. We use the TCP/IP protocol to send the image frames. The client can control the position of the camera by sending the control command to the server. Two DC servo motors for the camera are controlled in any directions, up-down and left-right, by the controller which is communicating with the server via the serial communication to get the control command. In this way, on the client we can monitor the moving images at the server and also control the position of the camera.

• 한국레이저가공학회지
• /
• 제6권1호
• /
• pp.9-16
• /
• 2003

Micromachining using the DPSS 3rd Harmonic Laser (355nm) has outstanding advantages as a UV source in comparison with Excimer lasers in various aspects such as maintenance cost, maskless machining, high repetition rate and so on. It also has the greater absorptivity of many materials in contrast to other IR sources. In this paper, the process for micro-drilling of blind hole in Cu/PI/Cu substrate with the DPSS UV laser and the scanning device is investigated by the experimental methods. It is known that there is a large gap between the ablation threshold of copper and that of PI. We use the Archimedes spiral path for the blind hole with different energy densities to ablate the different material. Finally, the blind via hole of diameter 100$\mu\textrm{m}$ and 50$\mu\textrm{m}$ was drilled.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.93-97
• /
• 2005

This paper proposes a design of stepper motor control in microstep driven mode using FPGA (Field Programmable Gate Array) for hardware implementation. The methods to drive stepper motor in microstep excitation mode are to control of the controlling currents in each phase windings of stepper motor with reference signals. These reference signals are used for controlling the current levels, the required variation of current levels with rotor position can be obtained from the ideal linear or sinusoidal approximations to the static torque-displacement ($T-{\theta}$) characteristic curve. In addition, the hardware implementation of stepper motor controller can be designed uses VHDL (Very high speed integrated circuits Hardware Description Language) and synthesis using an Altera FPGA, FLEX10K family, EPF10K20RC240-4 device as target technology and use MAX+PlusII program for overall development. A multi-stack variable-reluctance stepper motor of Sanyo Denki is used in the experiments.

• 디지털산업정보학회논문지
• /
• 제9권2호
• /
• pp.11-15
• /
• 2013

We in order to use WLAN communication device planned wireless USB dongle internal antenna of 2.4 GHz/5.8 GHz band. So it uses square patch dual-wideband and quality is satisfactory and it designed print folded monopole antenna of the shape which is simple. The thickness of the antenna was fed by a $50{\Omega}$ coaxial cable feeding 1mm dielectric constant 4.4 FR4 substrate was used. The overall size of the antenna is $20mm{\times}50mm$. So the internal antenna is suitable. Measurement results of the fabricated antenna, the return loss of more than 10 dB in the two bands could be obtained. Radiation pattern has a maximum gain of 3.75 dBi value.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.2997-3017
• /
• 2020

With the advancement in the field of image processing, images are being processed using various image processing algorithms. Nowadays, many efficient content-aware image resizing techniques are being used to safeguard the prominent regions and to generate better results that are visually appealing and pleasing while resizing. Advancements in the new display device with varying screen size demands the development of efficient image resizing algorithm. This paper presents a survey on various image retargeting methods, comparison of image retargeting results based on performance, and also exposes the main challenges in image retargeting such as content preservation of important regions, distortion minimization, and improving the efficiency of image retargeting methods. After reviewing literature from researchers it is suggested that the use of the single operator in image retargeting such as scaling, cropping, seam carving, and warping is not sufficient for obtaining satisfactory results, hence it is essential to combine multiple image retargeting operators. This survey is useful for the researchers interested in content-aware image retargeting.

• 기술혁신학회지
• /
• 제6권2호
• /
• pp.175-190
• /
• 2003

This paper deals with the methods for selecting the key research areas, which fit for the large, multi-disciplinary, and long-term programs by making use of Technology Cluster Analysis. This method is applied to mano-technology field at the level of national R&D program. 56 nano-technologies are analyzed and grouped into three main clusters based on the survey data from 180 experts. Three main clusters are \circled1 naro-materials related cluster, \circled2 naro-device related cluster, and \circled3 naro-bio related cluster. These three clusters are coincided with the focused areas of nano-technology in Korea. Each cluster is analyzed in view of its competence position.