• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.128-129
• /
• 2016

This study is to categorize the loading of multiple persons on a vertical building elements into three types to test the size of crowd pressure under each loading patterns. The loading patterns is divided under the combination of loading method and loading persons. The loading method is categorized into the method of instantaneous loading of hand on a force plate and the method of continuous loading. The loading persons has been composed of 1~5 persons under the loading patterns. The loading patterns is also divided into lateral loading, longitudinal loading, and agglomeration loading. The subject group has been composed of 12 males in 20s. The load measurement device(size 1800×600×36mm, capacity 20kN, rigidity 28kN/cm) has been designed and manufactured directly. To eliminate the difference of individual, the size of crowd pressure has been converted into the strength to weight ratio (maximum load/weight) for computation. The strength to weight ratio in lateral loading was about 0.91 under instantaneous loading and about 0.47 under continuous loading. The strength to weight ratio in longitudinal loading was about 0.65 under instantaneous loading and about 0.36 under continuous loading. The strength to weight ratio in agglomeration loading was about 0.65 under instantaneous loading and about 0.36 under continuous loading.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.911-915
• /
• 2014

Pyrotechnic devices are widely used for space appendages. However, a cube satellite requirements do not permit the use of explosive pyrotechnic device. A nichrome burn wire release has typically been used for holding and release of deployable appendages of the cube satellite due to its simplicity and low cost. However, relatively low mechanical constraint force and system complexity for application of multi-deployable systems are disadvantages of the conventional mechanism. To overcome these drawbacks, we have developed a segmented nut type holding and release mechanism based on the nichrome burn wire release. The great advantages of the mechanism are much lower shock level and larger constraint force than the conventional mechanism using pyro. Flight model for on-orbit verification was developed and verified through release function test, vibration test and thermal vacuum test.

• Journal of Information Technology Services
• /
• v.7 no.2
• /
• pp.149-164
• /
• 2008

As the computing landscape is shifting to ubiquitous computing environments, there is increasingly growing the demand for a variety of device controls that react to user's implicit activities without excessively drawing user attentions. We developed an EMG-based car interface that enables the physically handicapped to drive a car using their functioning peripheral nerves. Our method extracts electromyogram signals caused by wrist movements from four places in the user's forearm and then infers the user's intent from the signals using multi-layered neural nets. By doing so, it makes it possible for the user to control the operation of car equipments and thus to drive the car. It also allows the user to enter inputs into the embedded computer through a user interface like an instrument LCD panel. We validated the effectiveness of our method through experimental use in a car built with the EMG-based interface.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1115-1118
• /
• 2015

Two wheel type electric vehicles driving with the electric motors for guard are used increasingly at the airport and harbor place to move between narrow indoors. This type two wheel electric vehicles are powerd by batteries and using the steering control apparatus including multi sensors and handle operating device for forward and backward, rotating moving. At this research, we design sensor interfacing electronic control system use only the center of foot balance without the handle type steering apparatus. This design is for safety of drivers at one's cornering.

• English Language & Literature Teaching
• /
• v.8 no.2
• /
• pp.151-176
• /
• 2003

Motivation and learning strategies, some of the important factors affecting language learning, have mostly been studied with reference to their relationship in terms of proficiency. This study investigated motivation and learning strategies and their relationship in order to find the inward predisposition of learners. Data was collected from 200 university students in Taejon and Chungnam province, Korea language learning strategies were measured by the Strategy Inventory for Language Learning(SILL), and motivation by the Attitude / Motivation Test Battery(AMTB), with adaptations for Koreans. The detailed analysis of the data Indicated that Korean university students were more motivated to learn English for a practical goal than a formal one. They had a strong willingness to learn but showed 'the tendency of the new generation' of choosing the easiest and most convenient ways in studying English in terms of motivational intensity and strategy use. Findings imply that there have to be some changes and improvements in the deep-rooted classroom teaching methods. A systematic device is needed to induce students to be autonomous learners, providing them with a variety of activities suitable for their purposes and levels, as in opportunities of contacting native speakers, multi-media language labs, the Internet etc.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.322-325
• /
• 2005

The shrinking critical dimensions of modern technology place a heavy requirement on optimizing feature shapes at the micro- and nano scale. In addition, the use of ion beams in the nano-scale world is greatly increased by technology development. Especially, Focused ion Beam (FIB) has a great potential to fabricate the device in nano-scale. Nevertheless, FIB has several limitations, surface swelling in low ion dose regime, precipitation of incident ions, and the re-deposition effect due to the sputtered atoms. In recent years, many approaches and research results show that the re-deposition effect is the most outstanding effect to overcome or reduce in fabrication of micro and nano devices. A 2D string based simulation software AMADEUS-2D $(\underline{A}dvanced\;\underline{M}odeling\;and\;\underline{D}esign\;\underline{E}nvironment\;for\;\underline{S}putter\;Processes)$ for ion milling and FIB direct fabrication has been developed. It is capable of simulating ion beam sputtering and re-deposition. In this paper, the 2D FIB simulation is demonstrated and the characteristics of ion beam induced direct fabrication is analyzed according to various parameters. Several examples, single pixel, multi scan box region, and re-deposited sidewall formation, are given.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.9
• /
• pp.27-34
• /
• 2018

The purpose of this study is to demonstrate and analyze the function of a Smart Plug before and after it is applied on the electrical appliances by controlling standby power usage. The research measures and analyzes the amount of electrical energy used while activating the Smart Plug with two types of appliances in a university facilities. The smart plugs were applied into a Group 1 appliances (Multi-function device, computer, laptop, Air con) which completely hinder the standby power, and a Group 2 appliances (Refrigerator, cold and hot water dispenser) which does not completely hinder the standby powers due to the characteristics of the function. First, the total standby power saving of all electrical appliances (Group 1 and Group 2) using the Smart plug was measured as 4.59%. Second, the energy saving of the Group 1 products was analyzed as 26.43%. Third, the standby power saving of the air conditioners from mid October to early December was measured as 31.06%, during the seasons when air conditioning was not actively in use. The research indicates that all specified appliances did have better energy efficiency with the Smart plug regardless of the amount of energy usage.

• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.324-329
• /
• 2022

This paper proposes a shift-register-based multichannel ultrasonic focusing delay control method using a complex programmable logic device (CPLD) for a high resolution of ultrasonic focusing system. The proposed method can achieve the ultrasonic focusing through the delay control of driving signals of each ultrasonic transducer of an ultrasonic array. The delay of the driving signals of all ultrasonic channels can be controlled by setting the shift register in the CPLD. The experiment verified that the frequency of the clock used for the delay control increased, the error of the focusing point decreased, and the diameter of the focusing point decreased as the length of the shift register in the proposed method. The proposed method used only one CPLD for ultrasonic focusing and did not require to use complex hardware circuits. Therefore, the resources required for the design of an ultrasonic focusing system could be reduced. The proposed method can be applied to the fields of human computer interaction (HCI), virtual reality (VR) and augmented reality (AR).

• Journal of Sensor Science and Technology
• /
• v.32 no.6
• /
• pp.340-351
• /
• 2023

Wearable sensors designed for strain, pressure, and temperature measurements are essential for monitoring human movements, health status, physiological data, and responses to external stimuli. Notably, recent research has led to the development of high-performance wearable sensors using innovative materials and device structures that exhibit ultra-high sensitivity compared with their commercial counterparts. However, the quest for accurate sensing has identified a critical challenge. Specifically, the mechanical flexibility of the substrates in wearable sensors can introduce interference signals, particularly when subjected to varying external stimuli and environmental conditions, potentially resulting in signal crosstalk and compromised data fidelity. Consequently, the pursuit of non-interference sensing technology is pivotal for enabling independent measurements of concurrent input signals related to strain, pressure, and temperature, ensuring precise signal acquisition. In this comprehensive review, we present an overview of the recent advances in noninterference sensing strategies. We explore various fabrication methods for sensing strain, pressure, and temperature, emphasizing the use of hybrid composite materials with distinct mechanical properties. This review contributes to the understanding of critical developments in wearable sensor technology that are vital for their ongoing application and evolution in numerous fields.

• Informatization Policy
• /
• v.27 no.3
• /
• pp.56-81
• /
• 2020

The purpose of this research is to empirically examine the effects of motivation and skill for digital devices and the Internet on the use of online services in the severely disabled people. In addition to the general effect of digital divide, particularly for the case of severely disabled people, the effects of physical and mental inconvenience of individuals were taken into account and the moderating effect was confirmed by classifying the groups that need help with online activities and those that do not. The 2018 Digital Divide Survey data of the National Information Society Agency was used for the study. As a research method, path analysis and multi-group analysis using a sequence access model to Internet use were performed. As a result, it was confirmed that even in the case of the disabled, the motivational factor affects the skill for digital device operation and Internet use, and this access skill sequentially affects the use of online services. In particular, it was found that the effect of strategic and technical skill for internet use is the most important for the use of online services for the disabled rather than the motivation or a simple operational skill for digital devices. In addition, it was found that even in the disabled group, those requiring help in using the Internet was more passive in using the online service than the rest in the group. The results of this study suggest the need for stronger capacity for physical access as well as support in building strategic and technical skills that enhance responsibilities and protect from risks in using the Internet among the people with disabilities.