• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.113-116
• /
• 2003

In this paper, we propose a dynamic parallel channel allocation mechanism that dynamically controls total number of allocation channels of each subscriber to effectively service user bandwidth demands while high utilization and fairness are guaranteed in WDM based optical access networks. The logical performance gain of statistical multiplexing by dynamic channel allocation is validated with analytic method as well as simulations. We also introduce the adaptive padding scheme in order to efficiently distribute forwarded frames to aggregated multi-link channels which are formed by parallel channel allocation mechanism. The proposed scheme shows the performance enhancement by minimizing unnecessary padding size and the processing time.

• Transactions of Materials Processing
• /
• v.23 no.3
• /
• pp.151-158
• /
• 2014

Half channel angular extrusion(HCAE) is the integration of equal channel angular extrusion(ECAE), which is a well-known severe plastic deformation(SPD) method, with conventional forward extrusion in order to increase the strain per pass and effectiveness of the grain refinement. In the current study, the effects of processing routes during HCAE(Routes A, B, and C) on the strain distribution of the specimens have been investigated for an AZ61 Mg alloy by using three-dimensional finite element analysis. Comparisons with the results from a multi-pass of ECAE are made.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.353-361
• /
• 2000

The performance of a multi-carrier CDMA system is analyzed considering frequency selective multipath fading and Near/Far effects. The number of multicarrier, multiuser, and arms of RAKE receiver, and the decay ratio of frequency selective multipath fading are used as a parameter for the performance analysis. More over, the distribution and the strength of multiuser interference are also considered. To evaluated the Near/Far effects in a multi-carrier CDMA system, three distribution models are assumed. In the first model. interference to carrier Ratio, I/C, ranges form -4 dB to 4dB, and at each 2 dB interval 20 % of multiuser is assumed to be uniformly distributed. In the second one, I/C ranges from -2 dB to 2 dB, and 33.3% of multiuser is assumed to be equally dispersed at each 2dB interval. The third model is 0 dB of I/C, that is, with perfect power control, multiuser are assumed to be evenly located. In this paper, multi-carrier CDMA system adoption RAKE receiver is proposed to mitigate the frequency selective multipath fading. Form the results, the third model(i.e. perfect power control)shows the best performance, and the narrower range of I/C causes the less effects to the desired signal, which reads to the better performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.9
• /
• pp.688-698
• /
• 2009

Using the multi-dimensional, multi-phase, nonisothermal Polymer Electrolyte Fuel Cell (PEFC) model presented in Part I, the effects of land/channel flow-field on temperature and liquid saturation distributions inside PEFCs are investigated in Part II. The focus is placed on exploring the coupled water transport and heat transfer phenomena within the nonisothermal and two-phase zone existing in the diffusion media (DM) of PEFCs. Numerical simulations are performed varying the land and channel widths and simulation results reveal that the water profile and temperature rise inside PEFCs are considerably altered by changing the land and channel widths, which indicates that oxygen supply and heat removal from the channel to the land regions and liquid water removal from the land toward the gas channels are key factors in determining the water and temperature distributions inside PEFCs. In addition, the adverse liquid saturation gradient along the thru-plane direction is predicted near the land regions by the numerical model, which is due to the vapor-phase diffusion driven by the temperature gradient in the nonisothermal two-phase DM where water evaporates at the hotter catalyst layer, diffuses as a vapor form and then condenses on the cooler land region. Therefore, the vapor phase diffusion exacerbates DM flooding near the land region, while it alleviates DM flooding near the gas channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2433-2443
• /
• 1996

In this paper, a new technique is proposed for obtaining the error probabilities of the VSB(vestigial sideband modulation) signal in the presence of the cochannel interference and frequency-selective fading channel. For the receivers, a suboptimal matched filter receiver and the MLSE(maximum likelihood sequence estimation) receiver, which is known to be optimal on the fading channel, are considered. First, for the matched filter receiver, the distributions of the random variables, which determine the SER(symbol error rate) are obtained by decomposing the multi-path fading channel into Rayleigh distributed main path and Gaussian distributed remained path channels. the random variables mean the energy of the main path and subpath respecitively, and SER can be calculated from the distribution of them. Next, for the case of the MLSE receover, it is found that the random variables are expressed as a function of integrals. In order to obtain the distribution for the random variables, we expanded each element of integrals with the KL(Karhunen-Loeve) transformation. And it is derived that the distributions for the transformed random variables are given by a sum of chi-square distributions. Finally, we calculated the error rate derived formula on the two-ray fading channel, which is one of widely used models for the frequency-selective fading channel. From the numerical results, it is found that for the matched filer receiver, performance degradation is significant, while the performance degradation at the MLSE receiver is insignificant on the frequency-selective fading channel. However, in case of cochannel interference environment, the error rateis found to increase significantly both at the matched filter and at the MLSE receiver.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4891-4895
• /
• 2010

RF coil is an important component of the Magnetic Resonance Imaging (MRI) system and the performance of RF coil is one of major factors for high SNR images. Sensitivity and RF field uniformity are parameters for evaluating RF coil performance. Since the B1 field is induced by RF coil, MR signal is strongly affected by RF coil structure and arrangement. In receiving MR signal, the RF coil sensitivity to MR Signal is also determined by the induced B1 field of RF coil. Therefore, the spatial distribution of B1 field must be verified. In this work, we performed computer simulation of the basic RF coil structures using Matlab and verified their sensitivity and uniformity through their B1 field distribution. This work will be useful for the advanced multi-channel RF coil design.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.4
• /
• pp.41-47
• /
• 2011

The volumetric solar receiver is a key element of solar power plants using air. The solar flux distribution inside the receiver should be a priori known for its heat transfer analysis. Previous works have not considered characteristics of the solar flux although they change with radiative properties of receiver materials and receiver geometries. A numerical method, which is based on the Monte Carlo ray-tracing method, was developed in the current work. The solar flux distributions inside multi-channeled volumetric solar receivers were calculated when light is concentrated at the KIER solar furnace. It turned out that 99 percentage of the concentrated solar energy is absorbed within 15mm channel length for the channel radius smaller than 1.5mm. If the concentrated light is assumed to be diffuse, the absorbed solar energy at the channel entrance region is over predicted while the light penetrates more deeply into the channel. Once the presented results are imported into the heat transfer analysis, one could examine effects of material property and geometry of the receiver on air temperature profiles.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.47-54
• /
• 2011

This paper presents exploratory research on consumer awareness and attitudesabout organic food, for which consumer demand continues to increase the paper also assesses consumers' organic food distribution channel preferences. By conducting a literature review, a case study has been carried out in order to glean customer behavior, market condition and typesof distribution channels, and development of specialty stores for organic foods. The early research indicates that consumer awareness and customer attitudes toward organic food are mostly positive however, organic food's high price, as well as a lack of organic food stores, cause a negative effect on consumers' purchase intention. Secondly, the U.S. organic food retail channel consists of such mainstream supermarket/grocery stores and leading natural and organic food supermarket chains as Whole Foods, Trader Joe's, and Sunflower Farmers Market. For the current retail distribution of organic food in Korea, off-line stores are composed of direct management stores and franchise chains. Most of the organic food retail distribution operates through the Internet shopping mall, and are commonly located at retail distribution centers as multi-channel, shop-in-shop stores. Moreover, unlike in the U.S., association and consumers' cooperatives (Co-Ops), and such other member-direct retail stores as Hansallim, iCOOP, Nature Dream,and online shopping malls, are all active in Korea. Thirdly, as a result of an analysis of the present state of the organic food retail channel, as well as building a case for organic food specialty stores, the distinctive featuresand rapid growth of such unique organic food stores as Whole Foods Market, or Trader Joe's successful downsizing strategies, as well as Sunflower Farmers Market low-price approach, show steady industry growth. Moreover, as a result of a case studyof such domestic representative organic food specialty stores as "Olga" and "Chorokmaeul," a similar management style to the United States' "Whole Foods Market" and "Trader Joe's," respectively, can be seen. Similar to the U.S. market, Korean organic food markets should also implement active retail distribution opportunities, allowing consumers to select from various diverse and differentiated choices. In order to accomplish this goal, it is necessary to prepare such measures as sustaining reasonable prices, securing various suppliers for unique products,and improving consumer trust through advertisement strategies that are suitable for each company's branding processes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.309-315
• /
• 1998

This paper is analyzed the performance of coded MC-CDMA system using the multi-carrier with narrow band that is suggested to solve ISI and ICI of DS-CDMA system. In this paper, considered channel model is indoor mobile radio communication environment with Rician fading distribution and fading of multi-carrier have mutual independent characteristics. For the performance analysis of MC-CDMA system, first, bit error probability of uncoded system is simulated in the reverse and forward Rician channels. And then, it is simulated that bit error probability of coded MC-CDMA system for users, multicarriers and SNR, using (7,4) Hamming code, (15,7) BCH code and 1/2-convolutional code with 7 constraint length.

• Journal of Distribution Research
• /
• v.10 no.3
• /
• pp.87-101
• /
• 2005

Market segmentation has been an important issue in marketing for a long time. Many models and statistical methods have been developed by many scholars. The purpose of this research provides one insight for market segmentation based on clustering technique in channel benefit sought. We proposed a sequential approach in market segmentation. A sequential approach means that we do market segmentation by multi-stage method based on the benefits sought in marketing channel. To achieve this approach, we divided the main benefits sought into subcategories. That is to say, after dividing each benefit sought into more detailed concepts, we did market segmentation sequentially.