• 한국음향학회지
• /
• 제15권4호
• /
• pp.43-49
• /
• 1996

본 논문은 keyword spotting 기술을 이용한 247개의 DDD 지역명을 인식 대상으로 하여 화자 독립의 한국어 연속 음성인식을 위한 시스템을 제안하였다. 적용된 인식 알고리즘은 음성에서 시간축의 변화와 스펙트럼의 왜곡을 흡수할 수 있는 모델로 DP와 MLP로 구성된 동적 프로그래밍 신경회로망(DPNN)을 사용하였다. 이와 같은 실험을 위해 단어 모델을 만들고 이에 대한 단어 모델을 keyword 모델과 non-keyword 모델로 구분하여 성능을 향상시킬 수 있도록 하였다. 또한 잘못된 결과를 출력시키지 않기 위해서 후처리 과정을 두고 실험을 하였다. 실험결과, 단독어에 대한 화자 종속 실험은 93.45%의 결과를 보였고, 단독어에 대한 화자 독립 실험은 84.05%의 실험결과를 보였으며, 가장 중요한 간단한 대화체 문장의 keyword spotting 실험은 화자 종속으로 77.34%의 결과를 보였으며, 화자 독립 실험은 70.63%의 결과를 얻었다.

• 한국전자통신학회논문지
• /
• 제8권11호
• /
• pp.1707-1712
• /
• 2013

본 논문에서는 기존의 DSP, MCU, FPGA 기반의 모션 제어기들의 구조적인 문제점을 개선하기 위하여 최신 All Programmable SoC 인 Zynq EPP를 이용한 FPGA + 임베디드 프로세서 기반의 모터 제어기에 대한 하드웨어를 구현하였다. 구현한 모터 제어기는 FPGA와 임베디드 프로세서의 장점을 융합한 제어기로서 고속의 모터 제어용 신호처리 부분은 FPGA 기반의 모터 제어기가 수행한다. 복잡한 소수연산 등의 알고리즘 처리가 요구되는 모션 프로파일 및 기구학 계산 등은 듀얼 코어 기반의 임베디드 프로세서에서 처리하여 하나의 칩에서 분산처리 효과를 실현할 수 있는 구조적인 장점을 가진다. 또한 FPGA 상에 구현된 모터 제어 IP 코어의 추가를 통하여 손쉬운 다축 모터 제어기로의 구성이 가능한 장점도 가진다.

• 센서학회지
• /
• 제14권5호
• /
• pp.322-330
• /
• 2005

A new type of transducer, piezoelectric floating mass transducer (PFMT) which has advantages of piezoelectric and electromagnetic transducer has been proposed and implemented for the implantable middle ear hearing devices. By the uneven bonding of piezoelectric material to the inner bottom of transducer case, the PFMT can vibrate back-and-forth along the longitudinal axis of the transducer even though the piezoelectric material within the cylindrical case produces only the bilateral expansion and contraction according to the applied electrical signal. To improve efficiency of the PFMT, the multi-layered piezoelectric material has been adapted. The small number of components in the PFMT enables the simple manufacturing and the easy implanting into the middle ear. In order to examine the characteristics of vibration, mechanical modeling and finite element analyses of the proposed transducer have been performed. From the result of theoretical analyses and the measured data from the experiment, it is verified that the implemented PFMT can be used in implantable middle ear hearing devices.

• 센서학회지
• /
• 제20권2호
• /
• pp.137-144
• /
• 2011

Wireless sensor network(WSN) has the potential to greatly effect many aspects of u-healthcare. By outfitting the potential with WSN, wearable sensor node can collects real-time data on physiological status and transmits through base station to server PC. However, there is a significant gap between WSN and healthcare. WSN has the limited resource about computing capability and data transmission according to bio-sensor sampling rates and channels to apply healthcare system. If a wearable node transmits ECG and accelerometer data of 4 channel sampled at 100 Hz, these data may occur high loss packets for transmitting human activity and ECG to server PC. Therefore current wearable sensor nodes have to solve above mentioned problems to be suited for u-healthcare system. Most WSN based activity and ECG monitoring system have been implemented some algorithms which are applied for signal vector magnitude(SVM) algorithm and ECG noise algorithm in server PC. In this paper, A wearable sensor node using integrated ECG and 3-axial accelerometer based on wireless sensor network is designed and developed. It can form multi-hop network with relay nodes to extend network range in WSN. Our wearable nodes can transmit 1-channel activity data processed activity classification data vector using SVM algorithm to 3-channel accelerometer data. ECG signals are contaminated with high frequency noise such as power line interference and muscle artifact. Our wearable sensor nodes can remove high frequency noise to clear original ECG signal for healthcare monitoring.

• 한국환경복원기술학회지
• /
• 제12권3호
• /
• pp.142-163
• /
• 2009

Taebaek city is located in the mountainous plateau area therefore the major industry was coal industry. According to dramatically declining of the major industry, Taebaek city is need to alternative industry which associated with considering the geographical characteristics of natural tourism resources for increasing the local economy. On the basis of these reasons, this study can be suggested ecological planning and mitigation of deterioration technique about the these study site. That is the reserved area for mountainous experience theme park. As the results of environmental ecology assessment are following as; The natural ecosystem areas, multi-layer structure forest such as forest of Pinus densiflora, forest of Quercus mongolica and deciduous forest have a high value of nature, diversity and potential. In addition, wild bird habitats were important area as a inhabitation, breeding, feeding and hiding. Therefore, on these areas should be preserved. Also, it needs to conserve on there such as more than three types of wild bird inhabitate areas, the fringe of high biological diversity, the wetland that have got good vegetation condition and the function of amphibia, reptiles crossing. In addition, inhabitation, the waterway of wetland form that have got wide waterside width needs to conserve. In conclusion, on the basis of analysis results such as conditions of plan, environment, ecological assessments, survey informations are able to suggest the connectivity of the axis of forest and management plan. Moreover, in the part of forest restoration plan, we suggest the plan of transplant for a compensation of damaged forest by land use.

• 한국정보기술학회논문지
• /
• 제16권12호
• /
• pp.49-56
• /
• 2018

4차 산업혁명 시대가 도래하면서 무인항공기의 활용에 대한 관심이 급증하고 있다. 드론을 활용한 다양한 기술개발이 이루어지고 있는 가운데 드론의 비행 제어는 가장 기본이 된다. 드론의 비행제어 중 특히 자율비행을 가능하게하기 위해서는 호버링 제어가 필수적이다. 본 논문에서는 드론의 호버링 제어를 위해 ATmega2560과 소나, Optical Flow, 가속도/자이로 6축 센서를 바탕으로 드론을 설계하고 PID 제어를 기반으로 한 수평제어, 고도제어, 위치 추적 및 고정 알고리즘을 개발하였다. 본 연구에서는 드론의 객관적인 결과를 측정하기 위하여 시간에 따라 드론이 이륙하는 직후부터 고도를 유지하고 위치를 고정하고 안정적인 호버링을 유지할 때까지의 이동 값을 측정하여 비교 분석 하였다. 실험결과 드론은 기준좌표의 50cm 상공에서 수평 4cm, 수직 2cm 이내에서 안정적으로 호버링 할 수 있는 것으로 나타났다.

• 한국전자파학회논문지
• /
• 제30권2호
• /
• pp.173-176
• /
• 2019

본 논문에서는 밀리미터파 탐색기에 적용 가능한 Ka-대역 도파관 로터리조인트를 설계 및 제작하였다. 제안된 로터리 조인트는 낮은 정재파 비와 저손실 특성을 유지하며, 방위각과 고각 회전이 가능하도록 하는 두 개의 회전축으로 설계되어 있다. 또한 구형 도파관과 원형 도파관 사이에 전파 모드를 정합하기 위한 리지 도파관 형태의 모드 변환기와 ${\lambda}/4$ 길이의 초크 구조로 로터리 조인트를 설계하였다. 제작된 로터리 조인트의 성능은 회로망 분석기와 고출력 송신기를 이용하여 확인하였으며, 진동/충격 시험을 통해 신뢰성 검사를 수행하였다. 그 결과, 중심 주파수$(F_C){\pm}500MHz$의 대역에서 최대 정재파비 1.19 : 1 이하, 삽입손실 0.80 dB 이하의 우수한 특성을 갖는 것을 확인하였다.

• 대한치과교정학회지
• /
• 제51권1호
• /
• pp.32-42
• /
• 2021

Objective: To investigate the three-dimensional forces created by clear aligners on mandibular teeth during differential activation with en-masse retraction and/or intrusion in vitro. Methods: Six sets of clear aligners were designed for differential en-masse retraction and/or intrusion procedures in a first premolar extraction model. Group A0 was a control group with no activation. Groups A1-5 underwent different degrees of retractions and/or intrusions. Each group consisted of 10 aligners. Aligner forces were measured on a multi-axis force/torque transducer measurement system in real-time. Results: In the en-masse retraction groups (A1 and A2), lingual and extrusive forces were observed on the incisors; the canines mainly received distal forces; intrusive forces were seen on the second premolars; and the molars received mesial forces. In the en-masse retraction and intrusion groups (A3, A4, and A5), incisors also received lingual and extrusive forces; canines received distal and intrusive forces; mesial and extrusive forces were seen on the second premolars; and the second molars received distal and intrusive forces. The vertical forces on the incisors did not differ significantly among groups A1, A3, and A5. However, the vertical forces on the second premolars reversed from intrusion in group A1 to extrusion in groups A3 and A5. Conclusions: With clear aligners, the "bowing effect" is seen during en-masse anterior teeth retraction and can be partially relieved by performing en-masse retraction accompanied by anterior teeth intrusion. Vertical control of incisors remained unsolved during en-masse retraction, even when intrusive activation was added to the anterior teeth.

• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.371-377
• /
• 2020

In In this study, we compared the results of a ball bearing life prediction model based on rolling element loads with the results of fatigue life prediction of ball bearings when a stress-based contact fatigue life prediction technique is applied to the ball bearing. We calculate the load acting on each rolling element by the external load of the bearing and apply the result to the Lundberg-Palmgren (LP) theory to calculate ball bearing life based on the rolling element. We also calculate stress-based ball bearing life through contact and fatigue analyses based on contact modeling of the ball and raceway while considering the fatigue test results of AISI 52100 steel. In stress-based life prediction, we use three high-cycle fatigue-determination equations that can predict the fatigue life when multi-axis proportional loads such as rolling-slide contact conditions are applied. These equations are derived from the stress invariant and critical plane methods and the mesoscopic approach. Life expectancy results are compared with those of the LP model. Results of the analysis indicated that the fatigue life was predicted to be lower in the order of the Crossland, Dang Van, and Matake models. Of the three, the Dang Van fatigue model was found to be the closest to the LP life.

• Journal of Forest and Environmental Science
• /
• 제38권4호
• /
• pp.239-248
• /
• 2022

Forestry crane work in a forest harvester or forwarder is regarded as one of most hard work requiring a very high level of operation skill. The operator must handle two or more multi-axes joysticks simultaneously to control the multiple manipulators for maneuvering the crane-tip to its intended location. This study has been carried out to develop a crane-tip controller which can intuitively maneuver the crane-tip, resulting in improving the productivity by decreasing the technical difficulty of control as well as reducing the workload. The crane-tip controller consists of a single 2-axis joystick and a control algorithm run on microcontroller. Lab-scale forestry crane was constructed using electric cylinders. The crane-tip control algorithm has the crane-tip follow the waypoints generated on the given path considering the dead band region using LBO (Lateral Boundary Offset). A speed control gain to change the speed of relevant cylinders relatively is applied as well. By the P (Proportional) control within the control interval of 20 msec, the average error of crane-tip control on the predefined straight path turned out to be 14.5 mm in all directions. When the joystick is used the waypoints are generated in real time by the direction signal from the joystick. In this case, the average error of path control was 12.4 mm for straight up, straight forward and straight down movements successively at a certain constant speed setting. In the slant movement of crane-tip by controlling two axes of joystick simultaneously, the movement of crane-tip was controlled in the average error of 15.9 mm when the crane-tip is moved up and down while moving toward forward direction. It concluded that the crane-tip control was possible using the control algorithm developed in this study.