• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.101-107
• /
• 2019

This study conducted a simulation to observe the performance of a multi-turbocharged gasoline internal combustion engine for a high-altitude long-endurance unmanned aerial vehicle (HALE UAV). The WAVE 1-D engine simulation software from Ricardo was used for the engine system modeling and simulation. The specifications of a 2.4-L four cylinder gasoline engine from commercial vehicles and maps of commercial vehicle turbochargers were applied to the multi-stage turbocharged engine system model. Three turbochargers and intercoolers were installed in series for the appropriate intake of pressure for the gasoline engine at a high altitude of 60,000 ft. There was one wastegate for the turbochargers. The operability of the engine system was analyzed via this simulation model.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.56-64
• /
• 2017

A high altitude long endurance aircraft which carries out missions of environmental research communication relay or ground surveillance, should have the capacity to cruise in the stratosphere at a relatively low speed for a long dwell time without the necessity of refueling. When one considers the propulsion system for such an aircraft, a reciprocating engine with a serial turbo-charger system to boost rarefied ambient air up to sea level condition, would represent an good, informed and practical choice regardless of the cruising altitude of the aircraft. In this paper, high altitude long endurance aircraft developed by overseas research groups and research trends, regarding multi-stage turbocharger systems, are introduced.

• Journal of Aerospace System Engineering
• /
• v.10 no.2
• /
• pp.7-13
• /
• 2016

Multi disciplinary approach for aerodynamics, structure, propulsion, and flight control system is necessary to develop High Altitude Long Endurance Unmanned Aerial Vehicles (HALE UAV). Various HALE UAV development trends are surveyed to understand their operational requirements. Separating the UAV Take Off Weight by 150kg, Airworthiness implementation direction for HALE UAV is studied under the current Airworthiness regulations. NATO STANAG 4671 and STANAG 4703 Airworthiness certification criteria are analyzed, and their applicability was proposed for future HALE UAV development. In addition, minimization of the risk for UAV is studied by considering probability of cumulative catastrophic failure for HALE UAV. This Hazard Risk Index can support the future UAV Airworthiness Certification Criteria.

• Korean Journal of Environment and Ecology
• /
• v.22 no.5
• /
• pp.471-480
• /
• 2008

This study was conducted to investigate the characteristics of breeding bird community in relation to altitude and vegetation in Jirisan National Park. The survey was carried over 4 study sites by point counts method to figure out habitat environment and breeding bird community from March to August in 2006. The study results are summarized as follows: Total 32 species were recorded, and 27 species and density of 37.31 ea/ha in low altitude mixed forest, 23 species and 34.99 ea/ha in low altitude deciduous forest, 18 species and 23.95 ea/ha in high altitude mixed forest, 19 species and 20.21 ea/ha in high altitude deciduous forest, respectively. Eleven species were observed only in the low altitude sites, 4 species were observed only in the high altitude sites. Number of species and density were high in the low altitude sites, and they were high in the mixed forests. In nesting guild analysis, the low altitude sites are similarly found species number of three types but canopy nesting species in the high altitude sites are advent less. In foraging guild analysis, the species number of canopy foraging appeared most highly in all study sites. In the difference analysis of each species density. Four species which are showed the difference in the low altitude sites, owing to vegetation. Long-tailed Tit(Aegithalos caudatus) and Great tit(Parus major) are difference because of difference in volume of canopy layer, and Coal Tit(Parus ater) was difference because of coniferous forest preference quality. Four species(Hazel Grouse, Winter Wren, Pale Thrush, Yellow-throated Bunting) which are showed the difference of the density in the high altitude sites because of thick growth of the bush layer. Ten species which are showed the difference in study sites, owing to altitude. Oriental Cuckoo(Cuculus saturatus), Winter Wren(Troglodytes troglodytes), Siberian Blue Robin(Luscinia cyane), Arctic Warbler(Phylloscopus borealis), Coal Tit(Parus ater), and Yellow-throated Bunting(Emberiza elegans) appeared highly in the high altitude sites, Pale Thrush(Turdus pallidus), Long-taild Tit(Aegithalos caudatus), Varied Tit(Parus varius), and Eurasian Nuthatch(Sitta europaea) appeared highly in the low altitude sites. It seems that bush layer coverage volume and canopy layer total coverage volume do influences on the breeding bird community, because the bush layer was thick growth, and canopy layer coverage volume was difference. It would be needed the management and maintenance of bush layer coverage volume and canopy layer with multi-layer structure to increase foliage height diversity and total coverage volume for the protection and management of bird community in Jirisan National Park.

• The KSFM Journal of Fluid Machinery
• /
• v.20 no.1
• /
• pp.65-73
• /
• 2017

Intercoolers for multi-stage turbocharger of the hydrogen reciprocating engine for HALE UAV are installed for reducing the charged air inlet temperature of the engine. The intercooler is air to air, cross flow, plate-fin type and the fin configuration is offset-strip fin which is referenced from the heat exchanger of the ERAST. Most of HALE UAV's cruising altitude is 60,000 ft and the density of air for this altitude is very low compared to sea level. Therefore the required heat transfer area for the HALE UAV is about three-times bigger than the sea level. Consequently, it is essential to design to meet the required efficiency of intercooler in the range of not excessively growing the weight of the heat exchanger. The quasi-one dimensional heat transfer design/analysis for satisfying the requirement of the engine are written in this paper. The numerical analyses for estimating the coolant flow rate of the engine bay and pressure loss in the header and core are also summarized.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2049-2057
• /
• 2014

In this paper, a numerical method for analyzing coupling between high-altitude electromagnetic pulse (HEMP) as external field and a shielded twisted pair (STP) cable is proposed, which is based on an expanded chain matrix. Load responses of electromagnetic (EM) field excitation in uniform transmission line (TL) are solved by Baum-Liu-Tesche (BLT) equations in frequency domain, however, it is difficult to apply BLT equations to solve load responses of STP cable because the iteratively changing configuration of each twisted pairs are involved in cable. To avoid this problem and decrease memory and CPU time, we proposed the expanded chain matrix modeling method that is calculated using ABCD parameters, and applied multi-conductor transmission line (MTL) theory to consider the EMP coupling effectiveness of each twisted pairs. The results implemented by the proposed method are presented and compared with those obtained by the finite-difference time domain (FDTD) method as a kind of 3D full wave analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.797-807
• /
• 2015

The low-altitude PAC-2 Patriot missile system is the backbone of ROK air defense for intercepting enemy aircraft. Currently there is no missile interceptor which can defend against the relatively high velocity ballistic missile from North Korea which may carry nuclear, biological or chemical warheads. For ballistic missile defense, Korea's air defense systems are being evaluated. In attempting to intercept ballistic missiles at high altitude the most effective means is through a multi-layered missile defense system. The missile defense problem has been studied considering a single interception system or any additional capability. In this study, we seek to establish a mathematical model that's available for multi-layered missile defense and minimize total interception fail probability and proposes a solution based on genetic algorithms. We perform computational tests to evaluate the relative speed and solution of our GA algorithm in comparison with the commercial optimization tool GAMS.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.4
• /
• pp.379-386
• /
• 2015

This work presents fuel-optimal altitude maintenance of Low-Earth-Orbit (LEO) spacecrafts experiencing non-negligible air drag and J2 perturbation. A pseudospectral (direct) method is first applied to roughly estimate an optimal fuel consumption strategy, which is employed as an initial guess to precisely determine itself. Based on the physical specifications of KOrea Multi-Purpose SATellite-2 (KOMPSAT-2), a Korean artificial satellite, numerical simulations show that a satellite ascends with full thrust at the early stage of the maneuver period and then descends with null thrust. While the thrust profile is presumably bang-off, it is difficult to precisely determine the switching time by using a pseudospectral method only. This is expected, since the optimal switching epoch does not coincide with one of the collocation points prescribed by the pseudospectral method, in general. As an attempt to precisely determine the switching time and the associated optimal thrust history, a shooting (indirect) method is then employed with the initial guess being obtained through the pseudospectral method. This hybrid process allows the determination of the optimal fuel consumption for LEO spacecrafts and their thrust profiles efficiently and precisely.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.807-808
• /
• 2010

To insert payload to the orbit over the 200km-altitude using launch vehicle which has 300sec the Isp, multi staging technique for launch is necessary. The range between the sea-level to the transfer orbit about 200~250km is for operation of 1st and 2nd rocket engines and the higher altitude is for propulsion system of the acceleration block and satellite. The upper stage rocket engine should have the high technology for entering the payload into the orbit precisely more than the performance for high thrust level. With this investigation of the upper stage rocket engines which have been used, we want to understand their development trend and prospect which is going to be references for the development of ours.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2689-2708
• /
• 2016

Multi-camera systems which integrate two or more low-cost digital cameras are adopted to reach higher ground coverage and improve the base-height ratio in low altitude remote sensing. To guarantee accurate multi-camera integration, the geometric relationship among cameras must be determined through platform calibration techniques. This paper proposed a combined two-step platform calibration method. In the first step, the static platform calibration was conducted based on the stable relative orientation constraint and convergent conditions among cameras in static environments. In the second step, a dynamic platform self-calibration approach was proposed based on not only tie points but also straight lines in order to correct the small change of the relative relationship among cameras during dynamic flight. Experiments based on the proposed two-step platform calibration method were carried out with terrestrial and aerial images from a multi-camera system combined with four consumer-grade digital cameras onboard an unmanned aerial vehicle. The experimental results have shown that the proposed platform calibration approach is able to compensate the varied relative relationship during flight, acquiring the mosaicing accuracy of virtual images smaller than 0.5pixel. The proposed approach can be extended for calibrating other low-cost multi-camera system without rigorously mechanical structure.