• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.682-684
• /
• 2007

This paper deals the application of sensor network system to fabricate wireless nodes. This node includes a CPLD(XC2C256), FPGA(XC3S1000) a RF module(Bim-433-F), a Hall Sensor and I also develop the CPLD(EPGA) controlling with Verilog-HDL using ISE. The network was consisst of a PC, a Sink node as a gateway, and three Sensor nodes. This sensor network can reaches 40 m with RF interface using by multi-path network.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.249-254
• /
• 2008

Moored ocean buoys are technically feasible approach for making sustained time series observation in the oceans and will be an important component of any long-term ocean observing system. The 3M disc buoy carried Zeno 3200, MCCB, Orbcomm, Global Star and Bluetooth module. The deployments have relied on Orbcomm and Global Star as the primary satellite communications system. In addition to detailing our practical experience in the use of Orbcomm and Global Star as high latitudes, we will present some of scientific sensor results regarding real-time oceanographic and meteorological parameters such as wind speed, wave height and etc. In this paper we present the design and implementation of a small-scale buoy sensor network. One of the major challenges is that the network is hard to access after its deployment and hence both hardware and software must be robust and reliable.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.7
• /
• pp.279-285
• /
• 2002

This Paper deals with the economical equipment control which is used by internet network system at the industrial workplace. If the control devices can be accessed by internet, we can have the developed possibility of work conditions. in this paper, we presented the advanced digital timer which has a communication function to control and observe panel to realize control solution based on internet to be easily applicable at workplace with low cost, and we used RS-485 serial communication module to have parallel expansibility and safety. And, this system was experimented and designed for easy system management and status check from remote station through internet. As the result for experiment, the circuit configuration would be more simplified than the existing, and it is expected that multi connection control and monitoring can be simply implemented with low cost equipment at industrial workplace.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.11-12
• /
• 2014

This paper introduces a scaled hardware model for the 10kVA, 1kV, 11-level MMC (Modular Multilevel Converter), which was manufactured in the lab based on computer simulations with PSCAD/EMTDC. Various experiments were conducted to verify the major operation algorithms of MMC. The hardware scaled-model developed in the lab can be utilized for analyzing the operation analysis and performance evaluation of MMC according to the modulation pattern and redundancy operation scheme.

• Annual Conference of KIPS
• /
• 2003.05b
• /
• pp.1071-1074
• /
• 2003

Now internet is very popular. Many company services various contents in Web. One of the best way for internet community is network game service for internet member. There are some company to service high quality network game for gathering members. Those company make success for getting fee from their member. Global on-line game market is small but stability growing. Thus Microsoft invest on line game. On this paper, one of a java network turn game system called by "Hoola" is designed and implemented. This Application consist of Client/Server and Database module and multi-tier Architecture, because of easily translation to PDA or mobile phone.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.486-491
• /
• 2005

There come various types of robot with researches for mobile robot. This paper introduces the multi-joint snake robot having 16 degree of freedom and composing of eight-axis. The biological snake robot uses the forward movement friction and the proposed artificial snake robot uses the un-powered wheel instead of the body of snake. To determine the enable joint angle of each joint, the controller inputs are considered such as color and distance using PC Camera and ultra-sonic sensor module, respectively. The movement method of snake robot is sequential moving from head to tail through body. The target for movement direction is decided by a certain article be displayed in the PC Camera. In moving toward that target, if there is any obstacle then the snake robot can avoid by itself. In this paper, we show the method of snake robot for tracing the target with experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.88-95
• /
• 2013

We propose a novel driver circuit design using $0.18{\mu}m$ CMOS process technology that drives a 1550 nm high-speed VCSEL used in optical transceiver. We report a distinct improvement in bandwidth, voltage gain and eye diagram at 3.1Gb/s data rate in comparison with existing topology. In this paper, the design and layout of a 3.1Gb/s VCSEL driver for optical transceiver having arrayed multi-channel of integrating module is confirmed.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1597-1599
• /
• 2001

In this paper, two types of surge voltage generated in the only operation of capacitor bank composed of paralleled multi-modules are analyzed and also studied to suppress those. The surge voltage can give malfuction to the operation of capacitor bank and destroy the expensive components at the worst. The conditions and causes of surge voltage generation and the countermeasure for suppression are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.150.2-150
• /
• 2001

For pneumatic system control, we need a data transmission system with high speed and reliability for information interchange between main computer and I/O devices. This paper presents a set of design techniques for a data communication system that is mainly used for pneumatic system control. For this purpose, we first designed hardware modules for an interface between central control module and local node that handles the operation of solenoid valves. In addition, we developed a communication protocol for construction of RS-485 based multi-drop network, and this protocol is basically designed with a kind of polling technique. Finally we evaluated performance of the developed system. The field test results show that, even under high noise environment, the data transmission of 375Kbps rate is ...

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.3
• /
• pp.31-40
• /
• 1993

This paper deals with the modeling and scheduling for FMC(Flexible Manufacturing Cells). The FMC system composed of unit or multi cells is capable of improving productivity with flexibility for machine. However, the properties of multiple jobs and various alternatives results in tne dynamic states which make system management very complex. The extended Peti nets are used to represent for complex properties of FMC which performs short-term scheduling and dynamic operational scheduling. The hierarchical control structure and integlligent scheduling through expert module are adopted for efficiency of FMC operations. The computer simulation reveals that intelligent scheduling method is better than heuristics in various performance indices.