• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4420-4438
• /
• 2021

Image dehazing is an ill-posed problem which is far from being solved. Traditional image dehazing methods often yield mediocre effects and possess substandard processing speed, while modern deep learning methods perform best only in certain datasets. The haze removal effect when processed by said methods is unsatisfactory, meaning the generalization performance fails to meet the requirements. Concurrently, due to the limited processing speed, most dehazing algorithms cannot be employed in the industry. To alleviate said problems, a lightweight fast dehazing network based on a multiple scale-patch framework (MSP) is proposed in the present paper. Firstly, the multi-scale structure is employed as the backbone network and the multi-patch structure as the supplementary network. Dehazing through a single network causes problems, such as loss of object details and color in some image areas, the multi-patch structure was employed for MSP as an information supplement. In the algorithm image processing module, the image is segmented up and down for processed separately. Secondly, MSP generates a clear dehazing effect and significant robustness when targeting real-world homogeneous and nonhomogeneous hazy maps and different datasets. Compared with existing dehazing methods, MSP demonstrated a fast inference speed and the feasibility of real-time processing. The overall size and model parameters of the entire dehazing model are 20.75M and 6.8M, and the processing time for the single image is 0.026s. Experiments on NTIRE 2018 and NTIRE 2020 demonstrate that MSP can achieve superior performance among the state-of-the-art methods, such as PSNR, SSIM, LPIPS, and individual subjective evaluation.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.11-17
• /
• 2016

In this paper, we proposed a multi-viewer system with multiple HD cameras based AVB(Audio Video Bridge) ethernet cable using IP networking, and FPGA(Xilinx Zynq 702) for bus safety systems. This AVB (IEEE802.1BA) system can be designed for the low latency based on FPGA, and transmit real-time with HD video and audio signals in a vehicle network. The proposed multi-viewer platform can multiplex H.264 video signals from 4 wide-angle HD cameras with existed ethernet 1Gbps. and 2-wire 100Mbps cables. The design of Zynq 702 based low latency to H.264 AVC CODEC was proposed for the minimization of time-delay in the HD video transmission of car area network, too. And the performance of PSNR(Peak Signal-to-noise-ratio) was analyzed with the reference model JM for encoding and decoding results in H.264 AVC CODEC. These PSNR values can be confirmed according the theoretical and HW result from the signal of H.264 AVC CODEC based on Zynq 702 the multi-viewer with multiple cameras. As a result, proposed AVB multi-viewer platform with multiple cameras can be used for the surveillance of audio and video around a bus for the safety due to the low latency of H.264 AVC CODEC design.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.1-12
• /
• 2011

Large-sized multi-touch screen is usually made using infrared rays. That is because it has technical constraints or cost problems to make the screen with the other ways using such as existing resistive overlays, capacitive overlay, or acoustic wave. Using infrared rays to make multi-touch screen is easy, but is likely to have technical limits to be implemented. To make up for these technical problems, two other methods were suggested through Surface project, which is a next generation user-interface concept of Microsoft. One is Frustrated Total Internal Reflection (FTIR) which uses infrared cameras, the other is Diffuse Illumination (DI). FTIR and DI are easy to be implemented in large screens and are not influenced by the number of touch points. Although FTIR method has an advantage in detecting touch-points, it also has lots of disadvantages such as screen size limit, quality of the materials, the module for infrared LED arrays, and high consuming power. On the other hand, DI method has difficulty in detecting touch-points because of it's structural problems but makes it possible to solve the problem of FTIR. In this thesis, we study the algorithms for effectively correcting the distort phenomenon of optical lens, and image processing algorithms in order to solve the touch detecting problem of the original DI method. Moreover, we suggest calibration algorithms for improving the accuracy of multi-touch, and a new tracking technique for accurate movement and gesture of the touch device. To verify our approaches, we implemented a table-based multi touch screen.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.97-104
• /
• 2017

In this paper, we designed and fabricated the multi band Transceiver Assembly(TCA) for the Multi Channel Synthetic Aperture Radar(MCSAR) containing C-band, X-band, Ku-band and we researched to verify electrical performance of TCA. The transceiver consists of transmitters, receivers, signal selection modules for each band, and stability oscillator, frequency synthesizer, controller, power distributor. The transceiver has a receive path selection and bandwidth selection functions in accordance with the operating mode. And the transceiver can transmit and receive all three bands simultaneously, each band has a bandwidth of up to 300 MHz. Final transmission output of transceiver for each band is over 20 dBm to be suitable for driving the T/R module. Receiver bandwidth is selected according to the required function and receiver gain has approximately C-band 52 dB, X-band 50 dB, Ku-band 60 dB, the maximum noise figure of Ku-band V polarization is 4.28 dB in the whole band H, V polarization. As a result of the electrical performance test, a multi-band TCA is satisfied the property requirements of the MCSAR.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.5
• /
• pp.572-579
• /
• 1988

In this paper, a system of automatic placement and routing for gate array layout design is proposed. In the placement stage, the circuit is partitioned and using the concept of min-cut slicing, and each partitioned module is placed, so that the routing density over the entire chip be uniformized and the total wiring length be minimized. In the global routing stage, the concept of the probabilistic routing density is introduced to unify the wiring congestions in each channel. In the detailed routing stage, the multi-terminal nets are partitioned into the two-terminal nets. The ordered channel graph is proposed which implies the vertical and the horizontal constranint graphs simultaneously. And using the ordered channel graph, the proposed routing algorithm assigns the signal nets to the tracks. Also the proposed placement and routing algorithms are implimented on IBM/PC-AT to construct PC-level gate array layout system.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.4 no.2
• /
• pp.34-44
• /
• 1986

A data base system for a minicomputer, designed on the basis of the concept of Relational model, is proposed in this thesis. It is a module of reentrant programs, which can serve multi-users concurrently and interactivelv. Relational calculus is chosen as a data sublanguage. The inverted-list file structure is used for the physical storage structuse with the technique of seperating data and their relationships, while data model records, which contain the information of the logical data organization and linkage to a physical structure, con struct the data model. The retrieval is performed mainly with these.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.10
• /
• pp.1347-1357
• /
• 1995

In this paper, we describe a modularized neuroclassifier for enhancing the recognition accuracy of mixed printed and handwritten numerals. This classifier combines four modularized subclassifiers using multi-layer perceptron module. The input of each subclassifier is comprised of a group of specialized feature sets. On applying this method to combining several subclassifiers for unconstrained handwritten numerals, the experimental result shows that the performance of individual subclassifier can be improved. In winner-take-all voting method, the result of subclassifier having the highest RF value is selected as the output. The generality of this classifier is tested with 1,080 printed and 3,000 handwritten numerals that was not shown in training the neural networks. Experimental results show 98.2% recognition rate. The typical recognition test with a threshold value(RF=1.5) has shown 97% recognition, 1% substitution and 2% rejection rates.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.411-414
• /
• 2004

This paper introduces a modulation method for digital wireless communication based on general DS-QPSK. The design and fabrication is for home networking application to a typical RF transmitter with DS-QPSK modulator. This modulator implemented using VHDL hardware programming language, the fabrication of IC chip $5{\times}5 mm^2$ was carried by 27th IDEC MPW(Multi Project Wafer) process in 0.35${\mu}m$ rule at Samsung Inc. This paper presented the important of this technology for the future application in wireless sensor. This module can be efficient usage for home network to transmit the RF wireless sensor system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.465-472
• /
• 2017

Security has become one of the most important requirements for various devices for multi-sensor based embedded systems. The AES (Advanced Encryption Standard) algorithm is widely used for security, however, it requires high computing power. In order to reduce the CPU power for the data encryption of images, we propose a new image encryption module using hardware memoization, which can reuse previously generated data. However, as image pixel data are slightly different each other, the reuse rate of the simple memoization system is low. Therefore, we further apply an approximate concept to the memoization system to have a higher reuse rate by sacrificing quality. With the novel technique, the throughput can be highly improved by 23.98% with 14.88% energy savings with image quality loss minimization.

• Journal of Sensor Science and Technology
• /
• v.25 no.4
• /
• pp.257-263
• /
• 2016

Among several technologies related to human brain, Brain Computer Interface (BCI) system is one of the most notable technologies recently. Conventional BCI for direct communication between human brain and machine are discomfort because normally electroencephalograghy(EEG) signal is measured by using multichannel EEG sensor. In this study, we propose 2-channel EEG sensor-based application control system which is more convenience and low complexity to wear to get EEG signal. EEG sensor module and system algorithm used in this study are developed and designed and one of the BCI methods, Motor Imagery (MI) is implemented in the system. Experiments are consisted of accuracy measurement of MI classification and driving control test. The results show that our simple wearable system has comparable performance with studies using multi-channel EEG sensor-based system, even better performance than other studies.