• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1590-1594
• /
• 2007

This paper describes a case study on dynamic characteristics analysis of a 5-axis multi-tasking machine tool of ram-head typed. Natural frequency and corresponding vibration modes of the machine tool structure were obtained by using both FEM modal analysis and an experimental modal test(impulse hammer test). Both the theoretical and experiment analysis results showed good agreement with each other. Finally, some discussion and review, from the view point of resonance vibration and/or mode coupled chatter, were made based on the analysis results.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.39-44
• /
• 2002

A high speed data link capability is one of the critical factors in determining the performance of the spaceborne SAR system with high resolution because of the strict requirement far the real-time data transmission of the massive SAR data in a limited time of mission. In this paper, based on the data lint model characterized by the spaceborne small SAR system, the high rate multi-channel data link module is designed including link storage, link processor, transmitter, and wide-angle antenna. The design results are presented with the performance analysis on the data link budget as well as the multi-mode data rate in association with the SAR imaging mode of operation from high resolution to the wide swath.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.205-210
• /
• 2007

The integration method of binary and real encoding in genetic algorithm is proposed to deal with design variables of various types in gear drive design. The method is applied to optimum design of multi-stage gear drive. Integer and Discrete type design variables represent the number of teeth and module, and continuous type design variables represent face width, helix angle and addendum modification factor etc. The proposed genetic algorithm is applied for the gear ratio optimization and the volume optimization(minimization) of multi-stage geared motor which is used in field. In result, the proposed design optimization method shows an effectiveness in optimum design process and the new design has a better results compared with the existing design.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.5
• /
• pp.259-265
• /
• 2016

In this paper, we present an architecture for the fault isolation by applying virtualization-based multi-stack technologies. We propose the simultaneous sharing and switching mechanism using virtualied serial communications. Each guest OS has its own virtual serial device. The distribution module provides communications between the guest OS's through the virtual serial devices and simultaneously detect the liveness of the guest OS. The suggested mechanism has been implemented in VirtualBox and shows satisfactory performance in transmission speed and data sharing capability with virtual RS232.

• Transactions of Materials Processing
• /
• v.14 no.3 s.75
• /
• pp.224-232
• /
• 2005

The high-pressure die-casting is one of the most effective methods to produce a large amount of products in short cycle time. This process, however, has a problem that the gas porosity defect appears easily. The generation of gas porosity is known mainly due to the air entrapment during the injection stage. Most of numerical simulations for the molten metal flow pattern observations have done in the treating of one phase fluid flow but the gas-liquid interface is essentially multi- phase phenomenon. In this paper, the two-phase fluid flow numerical simulation methods have been adapted to predict the gas porosity generations in the molten metal. The accuracy and the usefulness of the new simulation module have been emphasized and verified through some comparison experiments.

• Laser Solutions
• /
• v.12 no.4
• /
• pp.1-5
• /
• 2009

Conventional patterning based on wet-process for multi-layered film is a relatively complex and costly process though it is a necessary step for fabrication of TFT-LCD module. Recently, a direct pattering by laser has been studied because it is low cost and simple process compared to the wet process. In this work, the selective removal process of multi-layered film (polyimide/indium tin oxide/glass) is studied by modeling the thermal and mechanical behavior for multi-layered structure. Especially, the effects of thickness of polyimide layer are examined.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.96-98
• /
• 2005

Proposed Multi-level PDP sustain Driver make use of element which has a low voltage rating instead of suggested method by the existing Webber and it passes through a second phase both rising and falling at sustaining voltage waveform In accordance with the change of timing phase(Tr1, Ti1, Tr2) performance comparison of a electric discharge characteristics in a PDP module has been carried out. At the conclusion of experimentation, the feature is extended by alteration of Ti1 and it has little to do with alteration of Tr1.

• Journal of Information Processing Systems
• /
• v.8 no.1
• /
• pp.21-54
• /
• 2012

As we know every software development process is pretty large and consists of different modules. This raises the idea of prioritizing different software modules so that important modules can be tested by preference. In the software testing process, it is not possible to test each and every module regressively, which is due to time and cost constraints. To deal with these constraints, this paper proposes an approach that is based on the fuzzy multi-criteria approach for prioritizing several software modules and calculates optimal time and cost for software testing by using fuzzy logic and the fault tolerance approach.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.6
• /
• pp.45-51
• /
• 2002

The existing methods to split overall gear ratio of the cylindrical multi-stage gear train have their own limitations to be used in practical design and are also problematic to be implemented in a formalized algerian. This paper proposes two types of new methods to find gear ratios best approximating the overall gear ratio. The proposed methods are quite general to be applied to the gear train having any number of stages, and offer a considerably good result in a very short time. The first method uses the random search method and the second one is based on the simulated annealing algorithm. The proposed algorithms are expected to be very useful not only as an independent program to split overall gear ratio, but also as a desist sub-module for the integrated desist system of multi-stage gear drives.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.351-352
• /
• 2012

본 논문에서는 최근 직류송전용 컨버터로 많은 관심이 집중되고 있는 MMC(Modular Multi-level Converter)에 대해서 소개하고 있다. 대용량 전압원 컨버터로 MMC가 적합한 이유에 대해서 설명하고, MMC의 동작원리, SM(Sub-Module) dc capacitor voltage balancing 기술, 전체 제어 시스템에 대해 자세하게 설명하고 있다. 제안하는 MMC는 Staircase Modulation 방식으로 사인파형에 가까운 출력전압을 형성하고, Sorting 알고리즘을 구현하여 개별 SM의 커패시터 전압이 균등하게 일정 값을 유지하도록 하였다. 제안하는 MMC의 성능평가를 위하여 PSCAD/EMTDC 프로그램을 이용하여 3상 11-level MMC를 모의하였다.