• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.196-205
• /
• 2008

Variability in vertical ozone and meteorological profiles was measured by 2Z electrochemical concentration cells (ECC) ozonesonde at Bangyi in Seoul ($37.52^{\circ}N$, $127.13^{\circ}E$) during June $6{\sim}9$, 2003 in odor to identify the vertical distribution of ozone and its relationship with the lower-atmospheric structure resulted in the high ozone concentrations near the surface. The eight profiles obtained in the early morning and the late afternoon during the study period clearly showed that the substantial change of ozone concentrations in lower atmosphere(${\sim}5\;km$), indicating that it is tightly coupled to the variation of the planetary boundary layer (PBL) structure as well as the background synoptic flow. All profiles observed early in the morning showed very low ozone concentrations near the surface with strong vertical gradients in the nocturnal stable boundary layer due to the photochemical ozone loss caused by surface NO titration under very weak vertical mixing. On the other hand, relatively uniform ozone profiles in the developed mixing layer and the ozone peaks in the upper PBL, were observed in the late afternoon. It was noted that a significant increase in ozone concentrations in the lower atmosphere occurred with the corresponding decrease of the mixing height in the late afternoon on June 8. Ozone in upper layer did not vertically vary much compared to that in PBL but changed significantly on June 6 that was closely associated with the variation of synoptic flows. Interestingly, heavily polluted ozone layers aloft (a maximum value of 115 ppb around 2 km) were formed early in the morning on 6 through 7 June under dominant westerly synoptic flows. This indicates the effects of the transport of pollutants on regional scale and consequently can give a rise to increase the surface ozone concentration by downward mixing processes enhanced in the afternoon.

• Cartoon and Animation Studies
• /
• s.30
• /
• pp.139-168
• /
• 2013

This article aims to explain the significance and value of cartoons in the 1910s which were largely passed unnoticed in the preceding cartoon studies by scrutinizing cartoons published in Maeilsinbo in the 1910s. Until now, Korean cartoons in the 1910s has been neglected just because it were published in Maeilsinbo. However, this writing analyzed cartoons in this period on the base of the fact that the cartoons in the 1910s printed in Maeilsinbo diversified the horizon of the Korean cartoon. Cartoons in Maeilsinbo functioned as a bridge connecting cartoons published in Daehanminbo in 1909 reputed as a root of Korean cartoon and 1920s, the time when satirical cartoons and comics started being printed in newspapers. The characteristics of Maeilsinbo as a bulletin of government general and periodical characteristics that the agent of popular culture begun to move reside as multi layers in the cartoons in the 1910s. In this article, the process and the development of how cartoons published in Maeilsinbo. As pleasure became important in everyday life in Korea, cartoons were able to earn a portion in the newspaper. In the beginning, modern cartoon style seemed vague, but as time goes by, its own style gradually settled. Cartoons in this period were not fixed in specific section but various kinds of cartoons were developed during the time since works of Korean as well as Japanese cartoonists and illustrators were published. Among them, representative cartoons in Maeilsinbo were analyzed in this article under three categories: first, cartoons represented 'Choseon-ness' through scenes of daily life and customs concurrently contained a view of anti-civilization/enlightenment; second, cartoons represented the accumulation of wealth as valid from the view point of public interest; last, cartoons divided Koreans who suffered from hardships of life in Kyungsung and Japanese in Jingogae in order to divide space. In conclusion, Maeilsinbo disciplined the colonized, Koreans, and exposed the discourse of the colonial power via cartoon.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.213-226
• /
• 2011

In global supply chain, the scheduling problems of large products such as ships, airplanes, space shuttles, assembled constructions, and/or automobiles are complicated by nature. New scheduling systems are often developed in order to reduce inherent computational complexity. As a result, a problem can be decomposed into small sub-problems, problems that contain independently small scheduling systems integrating into the initial problem. As one of the authors experienced, DAS (Daewoo Shipbuilding Scheduling System) has adopted a two-layered hierarchical architecture. In the hierarchical architecture, individual scheduling systems composed of a high-level dock scheduler, DAS-ERECT and low-level assembly plant schedulers, DAS-PBS, DAS-3DS, DAS-NPS, and DAS-A7 try to search the best schedules under their own constraints. Moreover, the steep growth of communication technology and logistics enables it to introduce distributed multi-nation production plants by which different parts are produced by designated plants. Therefore vertical and lateral coordination among decomposed scheduling systems is necessary. No standard coordination mechanism of multiple scheduling systems exists, even though there are various scheduling systems existing in the area of scheduling research. Previous research regarding the coordination mechanism has mainly focused on external conversation without capacity model. Prior research has heavily focuses on agent-based coordination in the area of agent research. Yet, no scheduling domain has been developed. Previous research regarding the agent-based scheduling has paid its ample attention to internal coordination of scheduling process, a process that has not been efficient. In this study, we suggest a general framework for agent-based coordination of multiple scheduling systems in global supply chain. The purpose of this study was to design a standard coordination mechanism. To do so, we first define an individual scheduling agent responsible for their own plants and a meta-level coordination agent involved with each individual scheduling agent. We then suggest variables and values describing the individual scheduling agent and meta-level coordination agent. These variables and values are represented by Backus-Naur Form. Second, we suggest scheduling agent communication protocols for each scheduling agent topology classified into the system architectures, existence or nonexistence of coordinator, and directions of coordination. If there was a coordinating agent, an individual scheduling agent could communicate with another individual agent indirectly through the coordinator. On the other hand, if there was not any coordinating agent existing, an individual scheduling agent should communicate with another individual agent directly. To apply agent communication language specifically to the scheduling coordination domain, we had to additionally define an inner language, a language that suitably expresses scheduling coordination. A scheduling agent communication language is devised for the communication among agents independent of domain. We adopt three message layers which are ACL layer, scheduling coordination layer, and industry-specific layer. The ACL layer is a domain independent outer language layer. The scheduling coordination layer has terms necessary for scheduling coordination. The industry-specific layer expresses the industry specification. Third, in order to improve the efficiency of communication among scheduling agents and avoid possible infinite loops, we suggest a look-ahead load balancing model which supports to monitor participating agents and to analyze the status of the agents. To build the look-ahead load balancing model, the status of participating agents should be monitored. Most of all, the amount of sharing information should be considered. If complete information is collected, updating and maintenance cost of sharing information will be increasing although the frequency of communication will be decreasing. Therefore the level of detail and updating period of sharing information should be decided contingently. By means of this standard coordination mechanism, we can easily model coordination processes of multiple scheduling systems into supply chain. Finally, we apply this mechanism to shipbuilding domain and develop a prototype system which consists of a dock-scheduling agent, four assembly- plant-scheduling agents, and a meta-level coordination agent. A series of experiments using the real world data are used to empirically examine this mechanism. The results of this study show that the effect of agent-based platform on coordinated scheduling is evident in terms of the number of tardy jobs, tardiness, and makespan.

• Journal of Environmental Policy
• /
• v.13 no.1
• /
• pp.69-93
• /
• 2014

The aim of this research was to develop a climate change vulnerability index at the district level (Si, Gun, Gu) with respect to the health care sector in Korea. The climate change vulnerability index was esimated based on the four major causes of climate-related illnesses : vector, flood, heat waves, and air pollution/allergies. The vulnerability assessment framework consists of six layers, all of which are based on the IPCC vulnerability concepts (exposure, sensitivity, and adaptive capacity) and the pathway of direct and indirect impacts of climate change modulators on health. We collected proxy variables based on the conceptual framework of climate change vulnerability. Data were standardized using the min-max normalization method. We applied the analytic hierarchy process (AHP) weight and aggregated the variables using the non-compensatory multi-criteria approach. To verify the index, sensitivity analysis was conducted by using another aggregation method (geometric transformation method, which was applied to the index of multiple deprivation in the UK) and weight, calculated by the Budget Allocation method. The results showed that it would be possible to identify the vulnerable areas by applying the developed climate change vulnerability assessment index. The climate change vulnerability index could then be used as a valuable tool in setting climate change adaptation policies in the health care sector.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.23-32
• /
• 2020

Geological CO₂ sequestration is a global warming response technology to limit atmospheric emissions by injecting CO₂ captured on a large scale into deep geological formations. The presented results concern mineralogical and hydrogeological investigations (FE-SEM, XRD, XRF, and MICP) of mudstone samples from drilling cores of the Pohang basin, which is the research area for the first demonstration-scale CO₂ storage project in Korea. They aim to identify the mineral properties of the mudstone constituting the caprock and to quantitatively evaluate the hydrogeologic sealing capacity that directly affects the stability and reliability of geological CO₂ storage. Mineralogical analysis showed that the mudstone samples are mainly composed of quartz, K-feldspar, plagioclase and a small amount of pyrite, calcite, clay minerals, etc. Mercury intrusion capillary pressure analysis also showed that the samples generally had uniform particle configurations and pore distribution and there was no distinct correlation between the estimated porosity and air permeability. The allowable CO₂ column heights based on the estimated pore-entry pressures and breakthrough pressures were found to be significantly higher than the thickness of the targeting CO₂ injection layer. These results showed that the mudstone layers in the Yeongil group, Pohang basin, Korea have sufficient sealing capacity to suppress the leakage of CO₂ injected during the demonstration-scale CO₂ storage project. It should be noticed, however, that the applicability of results and analyses in this study is limited by the lack of available samples. For rigorous assessment of the sealing efficiency for geological CO₂ storage operations, significant efforts on collection and multi-aspect evaluation for core samples over entire caprock formations should be accompanied.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.19-32
• /
• 2007

In Korea, there have been various methods of estimating groundwater recharge which generally can be subdivided into three types: baseflow separation method by means of groundwater recession curve, water budget analysis based on lumped conceptual model in watershed, and water table fluctuation method (WTF) by using the data from groundwater monitoring wells. However, groundwater recharge rate shows the spatial-temporal variability due to climatic condition, land use and hydrogeological heterogeneity, so these methods have various limits to deal with these characteristics. To overcome these limitations, we present a new method of estimating recharge based on water balance components from the SWAT-MODFLOW which is an integrated surface-ground water model. Groundwater levels in the interest area close to the stream have dynamics similar to stream flow, whereas levels further upslope respond to precipitation with a delay. As these behaviours are related to the physical process of recharge, it is needed to account for the time delay in aquifer recharge once the water exits the soil profile to represent these features. In SWAT, a single linear reservoir storage module with an exponential decay weighting function is used to compute the recharge from soil to aquifer on a given day. However, this module has some limitations expressing recharge variation when the delay time is too long and transient recharge trend does not match to the groundwater table time series, the multi-reservoir storage routing module which represents more realistic time delay through vadose zone is newly suggested in this study. In this module, the parameter related to the delay time should be optimized by checking the correlation between simulated recharge and observed groundwater levels. The final step of this procedure is to compare simulated groundwater table with observed one as well as to compare simulated watershed runoff with observed one. This method is applied to Mihocheon watershed in Korea for the purpose of testing the procedure of proper estimation of spatio-temporal groundwater recharge distribution. As the newly suggested method of estimating recharge has the advantages of effectiveness of watershed model as well as the accuracy of WTF method, the estimated daily recharge rate would be an advanced quantity reflecting the heterogeneity of hydrogeology, climatic condition, land use as well as physical behaviour of water in soil layers and aquifers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.3
• /
• pp.470-486
• /
• 1995

Mammary epithelial cells contain a subpopulation of cells with a large proliferativ potential which are responsible for the maintenance of glandular cellularity and are the progenitor cells of mammary cancer. These clonogens give rise to multicellular clonal alveolar or ductal units(AU or DU) on transplantation and hormonal stimulation. To isolate putative mammary clonogens, enzymatically monodispersed rat mammary epithelial cells from organoid cultures and from intact glands are sorted by flow cytometry according to their affinity for FITC labeled peanut lectin(PNA) and PE labeled anti-Thy-1.1 antibody(Thy-1.1) into four subpopulations : cells negative to both PNA and Thy-1.1(B-), PNA+cells, Thy-1.1+cells, and cells positive to both reagents(B+). The in vivo transplantation assays indicate that the clonogenic fractions of PNA+cells from out-growths of organoids in primary cultures for three days in complete hormone medium(CHM) are significantly higher than those of cells from other subpopulations derived from cultrues or from intact glands. Extracellular matrix(ECM) is a complex of several proteins that regulated cell function ; its role in cell growth and differentiation and tissue-specific gene expression. It can act as a positive as well as a negative regulator of cellular differentiation depending on the cell type and the genes studied. Regulation by ECM is closely interrelated with the action of other regulators of cellular function, such as growth factors and hormones. Matrigel supports the growth and development of several different multicellular colonies from mammary organoids and from monodispersed epithelial cells in culture. Several types of colonies are observed including stellate colonies, duct-like structures, two- and three-dimensional web structures, squamous organoids, and lobulo-duct colonies. Organoids have the greatest proliferative potential and formation of multi-cellular structures. Phase contrast micrographs demonstrate extensive intracellular lipid accumulation within the web structures and some of duct-like colonies. At the immunocytochemical and electron micrograph level, casein proteins are predominantly localized near the apical surface of the cells or in the lumen of duct-like or lobulo-duct colonies. Squamous colonies are comprised of several layers of squamous epithelium surrounding keratin pearls as is typical fo squamous metaplasia(SM). All-trans retinoic acid(RA) inhibits the growth of SM. The frequency of lobulo-ductal colony formation increased with the augmentation of RA concentration in these culture conditions. The current study models could provide powerful tools not only for understanding cell growth and differentiation of epithelial cells, but also for the isolation and characterization of mammary clonogenic stem cells.

• Journal of The Korean Association For Science Education
• /
• v.22 no.2
• /
• pp.299-313
• /
• 2002

A web-based instruction program for the enriched course under the 7th Revised National Curriculum of Biology in Korea was developed and the application effects to learners were analyzed. For the development of the web-based instruction program, five topics of biology from the enriched courses through 7th to 10th grades in the middle and high school science textbooks were selected and modulated with interrogative sentences. Each topic of programs was divided into four activity sections according to the learners' activity procedures supplemented with explanations and evaluations. Each activity was hyper-linked to multi-layers and animations. Further, a virtual experiment was also developed and an evaluation section designed by Java Script was attached. Among five topics, one topic of 'Reproduction and development' at 9th grade level was selected to examine the effects on students' learning. Among 247 9th grade students in the research subject school, only 67 students were able to accessible to ultra-thin Internet cables with their computers at home and they became an experimental group. A control group was assigned to those who are similar level of school science achievement to the experiment group and did not use the web-based program. It was found that most of 9th grade students are able to use Internet at home, however, they do not prefer to use Internet for homework or task project. Rather, most of students used Internet for e-mail or information navigation. Students used internet to solve problems of science and perceived the benefits of Internet for science learning. However, there are not many students to utilize Internet for science homework or task project. Students expressed that they do not prefer to use a web-based learning program for science learning due to lack of interests in science. The effects on students who studied with this program appeared to be significantly high compared to those who did not study with this program. Students who studied with this program positively evaluated this program, in particular, they enjoyed animation effect and virtual experiments. It was concluded that a web-based program for science learning should be developed and distributed through Internet in an attractive and interesting format for students. It was also concluded that various web-based programs for science learning with animation effect and virtual experiments should be developed to increase students' interests in science as well as to improve students' science achievements.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.113-121
• /
• 2010

Shumi-sen(須彌山), built by Nohjagong(路子工) in the southern garden of the Palace Garden during the Asuka Period, is understood as being Sumeru based on an Indian perspective of the theory of the origin of universe. It is also viewed as Mt. Myogoh from a Chinese Buddhist worldview. It is thought to be a type of assembled stone structure with Poong-ryoon (風輪)-Su-ryoon(水輪)-Geum-ryoon(金輪)-Ji-ryoon(地輪) carved into each of the 4 stone pieces. These building shapes are thought to have been utilized as stone for exterior construction as opposed to those structures built during the Shilla Period of China and Korea. Aside from Nohjagong's record of Shumi-sen, most of the records from Japan's period of the time suggest that Shumi-sen was an important element that played a role in the scenery of the seasonal outdoor gardens. It is also thought, from the sentences and expressions surrounding the records, that a combination of the seasonal sceneries was utilized centered on Shumi-sen, and that they were all used during festival events. From a perspective of analysis and interpretation dependent on the limited literature and on observation, it cannot be verified whether the Mt. Sumeru Stone(須彌山石) excavated from the Stone God Ruins is the same Shumi-sen that Nohjagong built along with Okyo(吳橋), but it is thought that the 'Shumi-sen type stone structure' that was later built repeatedly as part of the palace garden facilities is identical to the Shumi-sen built at the Imperial Palace's southern garden, or at least a re-built structure based on the Shumi-sen that Nohjagong built with stones and ponds used to create the foundation. Thus, Shumi-sen that Nohjagong supposedly built along with Okyo is suspected to be a figurative rock arrangement and, at the same time, a miniaturized scenic rock arrangement(縮景樹石) that maximized the shape of Buddhism's Shumi-sen. On the other hand, the surface pattern on Mt. Sumeru Stone is very similar to the multi -layers of mountainous pattern icons expressed in the patterns of the Great Golden Incense Burner(百濟金銅大香爐) or Mountain-Water Scenery Sculptural Brick(山水山景紋?) that were built during the Baekjae pcriod aod the rear side of Hwalsuk-jebul Basal Byungipsang(滑石諸佛菩薩竝立像); it is suspected that similar patterns would have been used if patterns were made on Shumi-sen that Nohjagong built. Also in consideration of the physical theory of MI. Sumeru Stone, the Siphon theory of using a pressure difference in water level was applied to the fountain facilities of Mt. Sumeru Stone that seemed to have been built from the practical rock arrangement perspective for the purpose of feasts, etc.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.95-105
• /
• 2005

This study was carried out to file up using effect and requirement of energy for environmental design data of Pleurotus eryngii growing houses. Heating and cooling Degree-Hour (D-H) were calculated and compared for. some Pleurotus eryngii growing houses of sandwich-panel (permanent) o. arch-roofed(simple) type structures modified and suggested through field survey and analysis. Also thermal resistance (R-value) was calculated for the heat insulating and covering materials of the permanent and simple-type, which were made of polyurethane or polystyrene panel and $7\~8$ layers heat conservation cover wall. The variations of heating and cooling D-H simulated for Jinju area was nearly linearly proportional to the setting inside temperatures. The variations of cooling D-H was much more sensitive than those of heating D-H. Therefore, it was expected that the variations of required energy in accordance with setting temperature or actual temperature maintained inside of the cultivation house could be estimated and also the estimated results of heating and cooling D-H could be effectively used far the verification of environmental simulation as well as for the calculation of required energy amounts. When the cultivation floor areas are all equal, panel type houses to be constructed by various combinations of materials were found to by far more effective than simple type pipe house in the aspect of energy conservation maintenance except some additional cost invested initially. And also the energy effectiveness of multi-span house compared to single span together with the prediction of energy requirement depending on the level insulated for the wall and roof area could be estimated. Additionally, structural as well as environmental optimizations are expected to be possible by calculating periodical and/or seasonal energy requirements for those various combinations of insulation level and different climate conditions, etc.