• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.370-373
• /
• 2009

The runner-valve is an effective solution for the filling balance of the multi cavity molds. Automation of the runner-valve system is necessary for more efficient and accurate control of the filing balance. We designed an automatic runner-valve actuator for the automation and characterized the actuator by experiment. We obtained a linear relationship between motor-driving time and the height of the runner-valve. However, the motor-driving times for upward and downward directions were different due to the frictional characteristics of the actuators. Also we obtained the motor-driving times for backlashes of the 4 actuators. The results were used to formulate the relationship between the resin-arrival time and the flow rate change of the runner-valve with the theoretical equation that was derived in the previous research.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.191-197
• /
• 2004

This paper presents experimental results for human drivers' driving patterns and an Adaptive Cruise Control(ACC) strategy. Analyses have shown that female drivers' driving characteristic values such as time-gap and minimum clearance are larger than those of male drivers'. Human drivers tend to have more clearance margins at high speed than at low speed. At low speed, drivers are much more sensitive to the desired clearance than at high speed. A multi-vehicle detection method is presented to improve ride quality of an ACC. Simulation results have shown that the proposed ACC can provide superior performance compared to the ACC strategy which uses a single-vehicle detection method.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.65-73
• /
• 2001

In this paper, a mobile system using multi-wheel steering and driving mechanism is proposed to maximize maneuverability of the wheeled mobile system. Among various possible configurations, the two-wheel steering and driving systems, which is minimal in structural requirement, is proposed to reduce the complexity in actual design and difficulties in control. The system possesses three or four degrees of freedom depending on the orientations of two wheels, one or two for driving and two for steering, which implies that the system's mobility is always less than three DOF. The proposed system, nonetheless, can exactly emulate characteristics of the omnidirectional motion as long as the planned path is smooth i.e., the curvature changes continuously while velocity is not zero. Efficient kinematic and dynamic control algorithms are proposed for position and orientation control of the proposed wheeled mobile system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1282-1285
• /
• 2004

The high voltage driving system with multi-phase shifter including piezoelectric actuators comprised a driving power unit for outputting the driving power by converting input alternate current into direct current, a frequency shifting unit for supplying the direct current power and shifting or generating a frequency, a high-voltage amplification unit for amplifying the input signal outputted from the driving power unit and the frequency shifting unit into a high-voltage signal, and a phase shifting unit for shifting the phase difference of the amplified signal applied to the high-voltage amplification unit and driving plural piezoelectric actuators sequentially. The results that the operating voltage was stable, the voltage loss ratio was low and the response velocity was fast could be obtained. An experiment on performance of the high voltage driving system with multi-phase shifter designed and manufactured as above described was conducted by using a piezoelectric pump having 3 sheets of round unimorph piezoelectric actuators laminated respectively in a rectangular case. It sucks any fluid by causing the first piezoelectric actuator to shift from the inlet porter side, the phase delay of 60$^{\circ}$ causes the second piezoelectric actuator to begin to shift, and the phase delay of 120$^{\circ}$ causes the third piezoelectric actuator to begin to shift. As a result of measuring each change in the outlet flow rate of the piezoelectric pump, it was shown that the frequency-flow rate characteristic, the voltage-flow characteristic, and the load pressure-flow rate characteristic were improved.

• 전력전자학회논문지
• /
• 제11권4호
• /
• pp.371-377
• /
• 2006

CCFL(CCFL: Cold Cathode Fluorescent Lamps, 이하 CCFL로 표기)은 전극이 내부에 존재하는 형태로 그 특성이 일정하지 않아 병렬구동이 어려워 개별 구동을 하고 있다. 본 논문에서는 각 CCFL의 임피던스 차이에 의한 전류오 차를 감소시켜 병렬구동이 가능하도록 구동한다. 제안하는 시스템은 단지 하나의 주 변압기로 동작하며, 다수의 램프를 구동시키기 위해 밸런스 변압기를 적용하여 가격적인이나 용적이 줄어드는 효과를 가져온다. 본 방식의 타당성을 실험 및 시뮬레이션을 통하여 입증하였다.

• 전력전자학회논문지
• /
• 제12권3호
• /
• pp.199-204
• /
• 2007

본 논문에서는 멀티램프 구동이 유리하여 인버터 개수를 줄일 수 있는 장점을 가지고 있는 EEFL을 사용하였으며, 변압기의 자체 손실을 줄이고 소형화가 가능하며, 높은 승압비를 갖는 압전 변압기를 병렬로 연결하여 멀티램프 구동이 가능하도록 하였다. 최적의 EEFL 구동회로를 구성하기 위해서 Push-Pull 타입의 압전 인버터를 설계하였으며, 설계된 인버터 회로에 대한 시뮬레이션 분석을 통하여 타당성을 검증하였다. 향후 본 논문에서 제안하는 구동 방식을 대화면 LCD 백라이트에 적용할 수 있을 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제17권2호
• /
• pp.98-112
• /
• 2018

공격운전은 상대방 운전자에 대한 공격 의지를 가지고 위협을 가하는 매우 위험한 운전행태이다. 기존 연구의 경우 공격운전자에 대한 주행특성 및 유발요인 등 공격운전자를 초점으로 한 연구가 대부분인 것으로 나타났다. 그러나 공격운전을 안전성 관점에서 분석하기 위해서는 공격운전 가해자와 피해자간의 상호작용에 대한 분석이 필요하다. 따라서 본 연구에서는 Multi-Agent 주행시뮬레이션 환경을 구축하여 공격운전 가해자와 공격운전 피해자간의 차량간격 및 상대속도를 통해 상호작용을 분석하였다. 공격운전 가해자와 피해자의 가감속 패턴을 파악하고 차간거리를 통해 TTC(Time-to-Coillison)를 도출하였다. 또한 도출된 TTC를 EDF(Exponential Decay Function)를 통해 사고발생가능성으로 전환하여 일반운전과 공격운전의 사고발생가능성을 분석하였다. 분석결과, 공격운전 시 일반운전에 비해 사고발생가능성이 높은 것으로 나타났다. 본 연구결과를 통해 공격운전의 위험성을 경고하며, 공격운전 관리방안 수립을 위한 기초연구로 활용될 수 있을 것으로 기대된다.

• 한국인터넷방송통신학회논문지
• /
• 제22권6호
• /
• pp.43-49
• /
• 2022

FMCW레이다는 일반 차량의 충돌방지용도 뿐만 아니라 자율주행시스템에서 활발히 센서로서 사용이 되고 있다. 본 논문에서는 자율주행센서로서 개발한 2-chip 기반의 FMCW MIMO(Multi Input Multi Output) 레이다 설계 및 구현에 대해서 설명하였다. 사용 칩을 이용하여 48채널의 가상배열을 이용하여 방위각 해상도가 우수하게 설계하였으며, 특히 Frame 기반과 Chirp 기반의 파형발생 및 신호처리를 혼합하여 최대탐지 가능 속도와 속도 보상에 대해 강점을 보유할 수 있도록 제작하였으며, 구현된 시스템은 실험실 내 시험과 실제 주행시험을 통하여 성능 및 상용화 가능성에 대한 분석을 진행하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.696-701
• /
• 2004

A vehicle cruise control algorithm using an Interacting Multiple Model (IMM)-based Multi-Target Tracking (MTT) method has been presented in this paper. The vehicle cruise control algorithm consists of three parts; track estimator using IMM-Probabilistic Data Association Filter (PDAF), a primary target vehicle determination algorithm and a single-target adaptive cruise control algorithm. Three motion models; uniform motion, lane-change motion and acceleration motion, have been adopted to distinguish large lateral motions from longitudinal motions. The models have been validated using simulated and experimental data. The improvement in the state estimation performance when using three models is verified in target tracking simulations. The performance and safety benefits of a multi-model-based MTT-ACC system is investigated via simulations using real driving radar sensor data. These simulations show system response that is more realistic and reflective of actual human driving behavior.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1742-1752
• /
• 2005

This paper presents a Multiple Target Tracking (MTT) Adaptive Cruise Control (ACC) system which consists of three parts; a multi-model-based multi-target state estimator, a primary vehicular target determination algorithm, and a single-target adaptive cruise control algorithm. Three motion models, which are validated using simulated and experimental data, are adopted to distinguish large lateral motions from longitudinally excited motions. The improvement in the state estimation performance when using three models is verified in target tracking simulations. However, the performance and safety benefits of a multi-model-based MTT-ACC system is investigated via simulations using real driving radar sensor data. The MTT-ACC system is tested under lane changing situations to examine how much the system performance is improved when multiple models are incorporated. Simulation results show system response that is more realistic and reflective of actual human driving behavior.