• 한국환경교육학회지:환경교육
• /
• 제7권1호
• /
• pp.1-17
• /
• 1994

This study was performed to determine appropriate teaching-learning and evaluation methods for Environmental Studies. To promote the relevance of our study to the needs of the schools and concerned educational communities of environmental education, we reviewed related literature, conducted questionnaire surveys, interviewed related teachers and administrator, held meetings with experts, and field-tested our findings. For selecting and developing teaching-learning methods of Environmental Studies, findings of educational research in general are considered. moreover, principles of environmental education, general aim of environmental education, orientations of environmental education, and developmental stages of middle school students in educational psychology were attended. In addition, relevance to the purpose of the Environmental Studies curriculum, appropriateness for value inquiry as well as knowledge inquiry, small group centered class organization, social interaction centered teaching-learning process, regional environmental situation, significance of personal environment, evaluation methods of Environmental Studies, multi- and inter-disciplinary contents of the Environmental Studies textbook, suitability to the evaluation methods of Environmental Studies, and emphasis on the social interaction in teaching-learning process were regarded. It was learned the Environmental Studies can be taught most effectively in via of holding discussion sessions, conducting actual investigation, doing experiment-practice, doing games and plate, role-playing and carrying out simulation activities, and doing inquiry. These teaching-learning methods were field-tested and proved appropriate methods for the subject. For selecting and developing evaluation method of Environmental Studies, such principles and characteristics of Environmental Studies as objective domains stated in the Environmental Studies curriculum, diversity of teaching-learning organization, were appreciated. We categorized nine evaluation methods: the teacher may conduct questionnaire surveys, testings, interviews, non-participatory observations; they may evaluate student's experiment-practice performances, reports preparation ability, ability to establish a research project, the teacher may ask the students to conduct a self-evaluation, or reciprocal evaluation. To maximize the effect of these methods, we further developed an application system. It considered three variables, that is, evaluates, evaluation objectives domains, and evaluation agent, and showed how to choose the most appropriate methods and, when necessary, how to combine uses of different methods depending on these variables. A sample evaluation instrument made on the basis of this application system was developed and tested in the classes. The system proved effective. Pilot applications of the teaching-learning methods and evaluation method were made simultaneously; and the results and their implications are as follows. Discussion program was applied in a lesson dealing with the problems of waste disposal, in which students showed active participation and creative thinking. The evaluation method used in this lesson was a multiple-choice written test for knowledge and skills. It was shown that this evaluation method and device are effective in helping students' revision of the lesson and in stimulating their creative interpretations and responces. Pupils showed great interests in the actual investigation program, and this programme was proved to be effective in enhancing students' participation. However, it was also turned out that there must be pre-arranged plans for the objects, contents and procedures of survey if this program is to effective. In this lesson, non-participatory observation methods were used with a focus on the attitudes of students. A scaled reported in general description rather than in grade. Experiment-practice programme was adopted in a lesson for purifying contaminated water and in this lesson, instruction objectives were properly established, the teaching-learning process was clearly specified and students were highly motivated. On the other hand, however, it was difficult to control the class when some groups of students require more times to complete their experiment, and sometimes different results. As regards to evaluation, performance observation test were used for assessing skills and attitudes. If teachers use well-prepared Likert scale, evaluation of all groups within a reasonablely short period of time will be possible. The most effective and successful programme in therms of students' participation and enjoyment, was the 'ah-nah-bah-dah-market' program, which is kind of game of the flea market. For better organized program of this kind, however, are essential, In this program, students appraise their own attitudes and behavior by responding to a written questionnaire. In addition, students were asked to record any anecdotes relating to self-appraisal of changes on one's own attitudes and behaviours. Even after the lesson, students keep recording those changes on letters to herself. Role-playing and simulation game programme was applied to a case of 'NIMBY', in which students should decide where to located a refuse dumping ground. For this kind of programme to e successful, concepts and words used in the script should be appropriate for students' intellectual levels, and students should by adequately introduced into the objective and the procedures of the lessons. Written questionnaire was used to assess individual students' attitudes after the lesson, but in order to acquire information on the changes of students' attitudes and skills, pre-test may have to be made. Doing inquiry programme, in which advantages in which students actually investigated the environmental influence of the areas where school os located, had advantages in developing students' ability to study the environmental problems and to present the results of their studies. For this programme to be more efficient, areas of investigation should be clearly divided and alloted to each group so that repetition or overlap in areas of study and presentation be avoided, and complementary wok between groups bee enhanced. In this programme, teacher assessed students' knowledge and attitudes on the basis of reports prepared by each group. However, there were found some difficults in assessing students' attitudes and behaviours solely on the grounds of written report. Perhaps, using a scaled checklist assessing students' attitudes while their presentation could help to relieve the difficulties.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권5호
• /
• pp.19-32
• /
• 2007

우리나라에서 대표적으로 사용되어 온 지하수 함양량 산정방법은 지하수 감수곡선에 의한 기저유출분리법, 유역내의 집중형 개념모형에 의한 물수지 분석, 그리고 지하수위 변동곡선법으로 대별된다. 지하수 함양량은 기후조건, 토지이용 그리고 수문지질학적 불균질성에 따르는 시공간적인 변동성을 나타내므로 전술한 방법들은 이같은 특성을 다루기에는 많은 제약을 가진다. 이 같은 단점을 극복하기 위해 본 연구에서는 통합 지표수-지하수 모형인 SWAT-MODFLOW로부터 얻어진 물수지 성분을 기초로 한 새로운 함양량 추정방법을 제시하고자 한다. 하천변에 위치한 지하수위는 하천흐름과 유사한 동적변화를 나타내는 반면 보다 상류부에 위치한 지하수위는 강수에 대하여 일정한 지체현상을 나타낸다. 이와 같은 지하수위 변동의 특징은 함양의 물리적 특성과 관련되므로 이 같은 현상을 설명하기 위해서는 토양층을 통과한 물이 대수층 함양에 도달하는데 걸리는 시간적 지체를 설명하는 것이 필요하다. SWAT 모형에서는 주어진 날에 대해 물이 토양층을 통과하여 대수층으로 함양되는 과정을 설명하기 위해 지수형태의 감쇠가중함수를 가진 단일 저수지 저류 모듈을 사용한다. 그런데 이 모듈은 지체시간이 긴 경우나 추정된 함양의 시계열이 지하수위 시계열과 잘 맞지 않는 제한 사항을 가지므로, 본 연구에서는 비포화대를 통과하는 시간 지체를 보다 현실적으로 반영할 수 있는 다단 저수지 저류 추적 모듈을 개발하여 SWAT모형에 탑재하였으며, 이 모듈내의 시간지체와 관련된 매개변수는 관측지하수위와 모의 함양량의 상관관계를 검토함으로써 최적화가 이루어지도록 하였다. 본 연구방법의 최종 단계는 모의 지하수위와 관측 지하수위, 그리고 관측 유역유출량과 모의 유출량을 검증함으로써 종결된다. 새롭게 제안된 방법을 우리나라 미호천 유역에 적용하여 지하수 함양량의 시공간적 분포를 추정하였는데 제시된 방법이 유역 모형의 효율성과 지하수위 변동법의 정확성이라는 장점을 모두 가진 방법이어서 추정된 일 함양량은 수리지질학적 불균질성, 기후조건, 토지이용과 토양층과 대수층의 거동까지 반영한 매우 개선된 값으로 판단된다.

• 생물환경조절학회지
• /
• 제26권3호
• /
• pp.194-200
• /
• 2017

본 실험은 벼 육묘장의 연중 활용을 위해 다단 재배상에서 벼 육묘판을 이용한 어린잎 채소의 적정 수확시기를 구명하고자 다단재배에서 단 위치 및 재배 일수가 생육과 품질에 미치는 영향을 알아보고자 실시되었다. 공시 작물은 배초향(Agastsche rugosa O.)과 큰다닥냉이(Lepidium sativum L.)를 사용하였고, 코코넛코이어로 충진한 벼 육묘판에 각각의 작물을 10일 육묘한 어린잎 채소를 6단 재배상($120{\times}45{\times}180cm$)의 1층 저단(지면으로부터 20cm)과 6층의 고단(지면으로부터 170cm)에 배치하였다. 공급액은 EC $1.5dS{\cdot}m^{-1}$의 배양액과 지하수를 하루간격으로 번갈아 각각 격일로 공급하였고, 하루 3회, 회당 200~400ml/tray씩 두상관수하였다. 7일 또는 14일간 재배하여 수확한 후 생육 및 항산화 함량을 분석하였다. 저단처리와 고단처리에서의 재배 기간 중 일평균 누적광량 및 온도는 $5.1{\sim}6.2MJ{\cdot}m^{-2}$, $26.5{\sim}26.6^{\circ}C$과 $9.3{\sim}9.6MJ{\cdot}m^{-2}$, $27.5^{\circ}C$로 계측되었다. 배초향의 생육(초장, 엽장, 엽폭, 엽수, 생체중)은 저단에서 14일 재배되었을 때 높았고, 고단에서 재배된 배초향의 초장은 짧고, 엽수가 감소하였다. 큰다닥냉이의 초장, 엽폭, 엽수, 생체중은 저단에서 14일 재배되었을 때 유의적으로 높았으며, 재배일수가 길어졌을 때 엽장, 엽폭, 엽수는 차이가 없었다. 배초향의 수량은 적산온도와 누적광량이 증가함에 따라 증가하였다. 큰다닥냉이의 수량은 적산 온도 증가시 증가한 반면, 누적광량에서는 감소하여 작물간 누적광량에 따른 수량에 차이를 보였다. 배초향의 폴리페놀 및 안토시아닌 함량은 고단에서 높았으며, 재배일수가 길어졌을 때 폴리페놀, 안토시아닌 및 플라보노이드 함량은 증가하였다. 큰다닥냉이의 폴리페놀 함량은 고단처리에서 높았고, 안토시아닌 및 플라보노이드 함량은 다단 위치와 재배일수에 따른 차이가 없었다. 한편 두 작물의 총엽록소 함량은 저단에서 7일 재배하였을 때 가장 높았다. 따라서 고온기 다단 재배 시 생육과 품질을 고려한 어린잎 채소 재배시 육묘 후 배초향은 고단에서 14일, 큰다닥냉이는 저단에서 7일 재배하여 수확하는 것이 좋으리라 판단한다.

• 한국농림기상학회지
• /
• 제3권3호
• /
• pp.135-142
• /
• 2001

이 연구는 강원도 지역의 시계열 기상자료와 산불발생현황자료를 이용하여 시ㆍ군별 산불발생유형을 구분하고자 지역간 기상요인과 발생원인 그리고 산불발생 일을 근거로 한 지역별 유형화 구분을 목적으로 시도되었다. 기상요인에 의한 산불발생 유형화에서는 최근 6년간의 강원도 소재 기상대의 기상자료를 적용하였으며, 지역과 산불발생원인과의 관련성 규명과 산불발생일의 불일치계수를 이용한 수량화된 다차원척도법 유형화에서는 최근 10년간의 산불발생현황자료를 적용하였다. 연구결과를 요약하면 다음과 같다. 첫째, 강원도 동해안산불과 같은 대형산불에 관련되는 기상요인으로는 평균온도, 최저온도, 최저초상온도, 평균풍속, 최대풍속 등으로 규명되었다. 둘째, 산불발생원인과 지역간의 관계를 도식화한 대응일치분석 결과에서는 지역과 산불발생원인과의 관계에서 가장 확연히 구분되는 지역으로는 '강릉'의 경우로 '방화'와 깊은 관련이 있는 것으로 나타났으며, '삼척'은 '입산자실화'와 '철원', '화천', '양구'지역은 군사훈련과 관계하는 것으로 보여지며, '속초'와 '춘천'의 경우에는 '쓰레기 소각'과 '담뱃불'이 타지역보다 밀접한 관련성이 있는 것으로 나타났다. 마지막으로 산화발생일을 근거로 각 시ㆍ군의 산불발생 유사성 정도 및 유형화 구분을 위한 다차원척도법 적용결과에서는 강원도 18개 시ㆍ군 지역이 5개의 유형으로 분류되었는데, 유형 I로 구분된 지역으로는 삼척, 강릉, 춘천, 원주, 홍천, 횡성으로 나타났으며, 유형 Ⅱ는 동해, 태백, 양양, 평창지역, 유형 Ⅲ은 정선, 철원, 화천지역, 유형 Ⅵ는 고성, 인제, 양구지역이, 그리고 마지막으로 유형 V는 속초와 영월지역으로 구분되었다. 지금까지의 도출된 연구결과들은 산불현황자료와 기상자료를 기초로 하여 도출된 결과를 근거로 제시하였고, 지역별 산불발생 특성을 보다 체계적으로 구분하기 위하여는 이외에도 지역별 임상요인과 지형 및 사회적 요인에 대한 검토들이 병행되어야 할 것으로 판단된다.의 경쟁이 생장에 영향을 미치는 것이 사실이다. 따라서 앞으로의 연구에서는 지형, 토양, 미기후 조건, 그리고 임목 간의 경쟁관계가 종합적으로 고려된 환경요인에 의한 생장특성을 파악하는 연구가 필요하다. 아울러 본 연구에서와 같이 지형기후학적 방법에 의하여 추정된 미기후를 통하여 보다 정확한 결과를 얻기 위해서는 무인자동기상관측 망의 설치를 통하여 이를 검증하는 작업이 필요하다.deling of self-similar traffic.ti colored dan have been produced after 1960's. Around the end of 1980's, automatic shuttle change loom have been generalized and 7 color dan(칠색단), 9 color gumsadan (구색금사단) have been current in multi colored dan. In terms of materials, synthetic and chemical textiles had been used widely and alter 1980's most fabrics, of which the ground weave is not being woven with satin-weave but being woven with plain or twill-weave, are named Dan in general.Standards for Livestock Products of Korea". The measured mean concentrations of Ca, Fe, Zn were generally higher than lower limit of labeled value(above 80% of labeled value). The mean concentration of sodium was lower than upper limit of labeled value(below 120％ of labeled value).

• 설비공학논문집
• /
• 제22권7호
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• Restorative Dentistry and Endodontics
• /
• 제24권4호
• /
• pp.647-656
• /
• 1999

The purpose of this study was to investigate the shear bond strength and marginal microleakage of composite to enamel and dentin according to different treatment methods when the applied bonding agent was contaminated by artificial saliva. For the shear bond strength test, the buccal and occlusal surfaces of one hundred twenty molar teeth were ground to expose enamel(n=60) and dentin surfaces(n=60). The specimens were randomly assigned into control and 5 experimental groups with 10 samples in each group. In control group, a bonding system(Scotchbond$^{TM}$ Multi-Purpose plus) and a composite resin(Z-100$^{TM}$) was bonded on the specimens according to manufacture's directions. Experimental groups were subdivided into 5 groups. After polymerization of an adhesive, they were contaminated with at artificial saliva on enamel and dentin surfaces: Experimental group 1 ; artificial saliva was dried with compressed air. Experimental group 2 ; artificial saliva was rinsed with air-water spray and dried. Experimental group 3 ; artificial saliva was rinsed, dried and applied an adhesive. Experimental group 4 ; artificial saliva was rinsed, dried, and then etched using phosphoric acid followed by an adhesive. Experimental group 5, artificial saliva was rinsed, dried, and then etched with phosphoric acid followed by consecutive application of both a primer and an adhesive. Composite resin(Z-100$^{TM}$) was bonded on saliva-treated enamel and dentin surfaces. The shear bond strengths were measured by universal testing machine(AGS-1000 4D, Shimaduzu Co. Japan) with a crosshead speed of 5mm/minute under 50kg load cell. Failure modes of fracture sites were examined under stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's test. For the marginal microleakage test, Class V cavities were prepared on the buccal surfaces of sixty molars. The specimens were divided into control and experimental groups. Cavities in experimental group were contaminated with artificial saliva and those surfaces in each experimental groups received the same treatments as for the shear test. Cavities were filled with Z-100. Specimens were immersed in 0.5% basic fuchsin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from the one specimen. Marginal microleakages of enamel and dentin were scored under streomicroscope and averaged from four sections. The data were analyzed by Kruskal-Wallis test and Fisher's LSD. The results of this study were as follows. 1. The shear bond strength to enamel showed lower value in experimental group 1(13.20${\pm}$2.94MPa) and experimental group 2(13.20${\pm}$2.94MPa) than in control(20.03${\pm}$4.47MPa), experimental group 4(20.96${\pm}$4.25MPa) and experimental group 5(21.25${\pm}$4.48MPa) (p<0.05). 2. The shear bond strength to dentin showed lower value in experimental group 1(9.35${\pm}$4.11MPa) and experimental group 2(9.83${\pm}$4.11MPa) than in control group(17.86${\pm}$4.03MPa), experimental group 4(15.04${\pm}$3.22MPa) and experimental group 5(14.33${\pm}$3.00MPa) (p<0.05). 3. Both on enamel and dentin surfaces, experimental group 1 and 2 showed many adhesive failures, but control and experimental group 3, 4 and 5 showed mixed and cohesive failures. 4. Enamel marginal microleakage was the highest in experimental group 1 and there was a significant difference in comparison with other groups (p<0.05). 5. Dentin marginal microleakages of experimental group 1 and 2 were higher than those of other groups (p<0.05). This result suggests that treatment methods, re-etching with 35% phosphoric acid followed by re-application of adhesive or repeating all adhesive procedures, will produce good effect on both shear bond strength and microleakage of composite to enamel and dentin if the polymerized bonding agent was contaminated by saliva.

• 설비공학논문집
• /
• 제26권12호
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• 한국토양비료학회지
• /
• 제46권1호
• /
• pp.23-31
• /
• 2013

L, C, X-밴드 마이크로파 산란계 자동측정시스템을 이용하여 밀 생육시기에 따른 밴드 및 편파별 후방산란계수와 생육인자 변화를 측정하였다. 모든 안테나 밴드에서 밀 생육 초기에는 VV-편파가 HH, HV-편파보다 후방산란계수가 높게 나타났다. HH-편파가 VV-편파보다 후방산란계수가 높게 나타나는 시기는 밴드에 따라 차이를 보였다. L-밴드의 경우 3월 28일 (DOY 88), C, X-밴드는 4월 2일 (DOY 93)부터 HH-편파가 다른 편파들 보다 후방산란계수가 높게 나타났다. 모든 안테나에서 편파별 후방산란계수가 5월 16일 (DOY 137)에 최대값을 보였고 그 이후 수확기 (DOY 174, 6월 22일)까지 감소하였는데 초장, 생체중, 건물중, 엽면적지수 등 밀 생육인자들에서도 동일한 경향이 나타났다. 밴드별 후방산란계수와 밀 생육인자들과의 상관관계를 분석한 결과 L-밴드 HH-편파에서 생체중 (r=0.98), 건물중 (r=0.96), 식생 수분함량 (r=0.98) 초장 (r=0.96) 등 모든 밀 생육인자들과 상관계수가 가장 높게 나타났다. L-밴드 HH-편파 후방산란계수를 이용하여 밀 생육인자를 추정한 결과 생체중 ($R^2$=0.98), 건물중 ($R^2$=0.95), 식생 수분함량($R^2$=0.98) 초장 ($R^2$=0.95)의 결정계수가 각각 높게 나타났다. L-밴드 HH-편파 후방산란계수를 이용하는 것이 밀 생육을 가장 높게 예측할 수 있었음을 확인하였다.

• 한국조경학회지
• /
• 제44권3호
• /
• pp.13-24
• /
• 2016

열악한 도시환경에서 주민이 일상적으로 가꾸어온 정원은 과연 어떤 기능과 역할을 하고 있을까? 본 연구는 일상적 도시정원을 살핌으로써, 지속가능한 도시재생의 대안을 찾고자 하였다. 이를 위해 최근 도시재생사업이 활발히 진행되고 있는 수진2동을 대상으로, 정원 조성 유형, 특성과 기능을 살펴보았다. 연구는 현장조사를 중심으로 진행하였고, 일부 조성 이유와 목적을 파악하기 위하여 인터뷰를 진행하였다. 연구 결과, 수진2동의 도시정원은 협소한 공간문제를 극복하기 위하여, 평지형보다는 입체형 정원이 주로 나타났다. 정원 조성 위치에 따라 6가지(건물 앞, 옥상, 현관지붕, 계단, 벽면, 마당)로 구분되었으며, 이중 공간 확보가 용이한 옥상 정원이 가장 많았고, 주로 생산을 목적으로 조성되었다. 지역 내 건축적 특징으로 인해 계단 정원이 상대적으로 많이 나타났는데, 주로 심미적 목적을 위해 조성되었다. 건물 앞 정원은 입구성, 시선차폐, 불법주차방지 등 다기능으로 사용하였다. 그 외, 단독주택에서는 적극적으로 조성한 수준 높은 정원이 확인되었고, 반면 다가구 주택에서는 공간이 상대적으로 협소해지며, 계단정원이 감소하고 벽면녹화가 증가하였다. 본 연구는 수진2동 도시정원의 현황과 특성을 파악함으로써, 현재 진행하고 있는 성남시 도시재생사업에서 철거와 신축만이 아니라 그 속에 살아가고 있는 주민의 삶 속에 담겨진 지혜를 발견하여 이용하는 것 또한 중요함을 말하고자 하였다. 특히 도시 공간 내에서 정원을 가꾼다는 것은 단지 개인의 취미를 넘어 도시의 공공성과 사회적 가치를 창출하고 있음을 드러내고자 하였다. 본 연구는 향후 도시재생 사업과 일상적 도시정원에 대한 이해를 위한 기초 연구로서 도움이 될 수 있을 것이라 예상한다.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.46-55
• /
• 2000

During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.