• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.47-55
• /
• 1994

This paper presents the CDMA system using the RAKE receiver over a multipath fading channel and in multi-user environments. The interference between the propagation paths in a multipath fading causes a serious degradation in the mobile communication environment. In order to derive the path inteference and reduce the fading effect, the RAKE receiver is used. In a computer simulation, the path number of a fading channel and the branch number of the RAKE receiver are modified. As a result, the CDMA system using the RAKE receiver gives a better performance than the conventional CDMA system over a multipath fading channel and in multi-user environments.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.359-360
• /
• 2011

In this work. a new receiver-driven channel rendezvous mechanism is proposed for multi-channel communication in Wireless sensor networks (WSNs). The work is a light-weight scheduled scheme. seems to be incurring less overhead in compare to traditional common control channel based rendezvous mechanisms.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.60-64
• /
• 2016

In this paper, we propose a scheme for MIMO beamforming for the backscatter communication using a multi-tag to improve the efficiency of energy harvesting and the BER of received signals. We obtain a normal channel information through a communication between the H-AP and multi-tag. The H-AP sets parameters for the transmission scenario of the spatial channel model (SCM) using the obtained channel information and generates a SCM channel information. Then, the H-AP transmits signals that have optimal transmission power to increase the signal-to-interference-plus-noise ratio (SINR) to each of tags. Tags perform a backscatter communication with signals. The receiver performs a time switching technique of energy harvesting using backscatter signals from the multi-tag. Simulation results demonstrate effectiveness of the proposed scheme, and the harvesting efficiency and BER at the receiver is greatly improved.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1671-1675
• /
• 2012

In this paper, we fabricate multi-channel receiver for radar system. This receiver at X-band can be received 8 signal of an identical characteristic, dynamic range has more than 80[dB]. To process direct received signals, this system has the built-in two digital de-modulators which offer the minimum loss on the receiving signal path and has high stability by adding Built-In Test. The gain, noise figure, difference of amplitude and phase on the signal path is respectively $14{\pm}2$[dB], 19[dB], ${\pm}2$[dB], $10^{\circ}$ and below.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.89-92
• /
• 2001

In this paper, adaptive multi-stage parallel interference cancellation (PIC) receiver is considered for a multi-rate DS-CDMA system. In each stage of the adaptive multi-stage PIC receiver, multiple access interference (MAI) estimates are obtained using the sub-bit estimates from the Previous stage and the adaptive weights for the sub-bit estimates. The adaptive weights are obtained by minimizing the mean squared error between the received signal and its estimate through a least mean square (LMS) algorithm. It is shown that the adaptive multi- stage PIC receiver achieves smaller BER than the matched filter receiver, multi-stage PIC receiver, and multi-stage partial PIC receiver for the multi-rate DS-CDMA system in a Rayleigh fading channel.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.203-207
• /
• 2010

In this paper, The design and implementation of Multi Channel Receiver is described in this paper. This Receiver system operates at X-band with processing received signal, more than 80[dB] dynamic range and wide-band signals at the same time. To process direct received signals, this system has the built-in Digital De-modulators which offer the minimum loss on the receiving signal pass and has high stability by adding Built-In Test (BIT). The performance of Multi Receiver is the following. The gain, noise figure, difference of amplitude and phase on the signal pass is respectively $14{\pm}2[dB]$, 19[dB], ${\pm}2[dB]$, and $10^{\circ}$ below.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.4
• /
• pp.186-193
• /
• 2005

The Terrestrial Digital Multimedia Broadcasting (T-DMB) system supplies high quality audio comparable with VCD in 7 inch display and high quality audio comparable CD at the mobile reception environment T-DMB will launch commercial service at the middle of 2005. However the bandwidth for audio data and the number of channels are restricted to 128 kbps and 2 respectively in the current T-DMB standard because of the limitation of available bandwidth for multimedia data. This Paper Proposes a novel media processor structure for providing multi-channel audio contents oyer T-DMB system allowing backward compatibility with the legacy T-DMB receiver. Furthermore. we also Propose an adaptive receiver structure to supply optimal audio contents on various speaker configuration in T-DMB receiver. To provide multi-channel audio contents allowing backward comaptilbity with the legacy T-DMB receiver, the additional data for multi-channel audio are defined as a dependent stream of main audio stream. The OD strucure for control an additional multi-channel audio elementary stream is proposed without changing the BIFS of the legacy T-DMB system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7A
• /
• pp.545-551
• /
• 2012

In this paper, K-band multi-channel receiver was designed and fabricated for low noise amplification and down conversion to L-band. The fabricated multi-channel receiver incorporates GaAs-HEMT LNA(Low noise amplifier) which provides less than a 2 dB noise figure, IR(Image Rejection) Filter for rejection of image frequency, IR(Image rejection) mixer to reject a image frequency and improve an IMD(Intermodulation Distortion) characteristic. Test results of the fabricated multi-channel receiver show less than a 3.8 dB noise figure, conversion gain of more than 27dB, and IP1dB(Input 1dB Gain Compression Point) of -9.5 dB and over.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.5
• /
• pp.527-536
• /
• 2021

In wireless environments, wideband receivers are used in a communication intelligent system to detect unknown signals and obtain azimuth information. To design a wideband receiver that performs multiple signal detection and direction finding simultaneously, it is necessary to consider a reception structure composed of multiple channels. In this paper, we propose a wideband multi-channel receiver for direction finding of unknown wideband communication signals including frequency hopping signals. A signal processing method for detecting received signals and estimating azimuth information is presented, and components of the manufactured wideband receiver are described. In addition, test results of the signal detection performance by mounting the proposed wideband multi-channel receiver on the flight system are included.

• Journal of information and communication convergence engineering
• /
• v.2 no.3
• /
• pp.139-144
• /
• 2004

In order to transmit various types of multimedia data (i.e. voice, video, and data) over a wireless channel, the coding and modulation scheme needs to be flexible and capable of providing a variable quality of service, data rates, and latency. In this paper, we study a mobile multimedia COMA network combined with the concatenated Reed-Solomon/Rate Compatible Punctured Convolution code (RS/RCPC). Also, this paper propose the combination of concatenated RS/RCPC coder and COMA RAKE receiver for multimedia COMA traffic which can be sent over wireless channels. From the results, using a frequency selective Rayleigh fading channel model, it is shown that concatenated RS/RCPC coder at the wireless physical layer can be effective in providing reliable wireless multimedia CDMA network. And the proposed scheme that combine concatenated RS/RCPC coder and CDMA RAKE receiver provides a significant gain in the BER performance over multi-user interference and multipath frequency selective fading channels.