• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권9호
• /
• pp.3172-3193
• /
• 2022

Cognitive radio-simultaneous wireless information and power transfer (CR-SWIPT) has attracted much interest since it can improve both the spectrum and energy efficiency of wireless networks. This paper focuses on the resource sharing between a point-to-point primary system (PRS) and a multiuser multi-antenna cellular cognitive radio system (CRS) containing a large number of cognitive users (CUs). The resource sharing optimization problem is formulated by jointly scheduling CUs and adjusting the transmit power at the cognitive base station (CBS). The effect of accessing CUs' spatial channel correlation on the possible transmit power of the CBS is investigated. Accordingly, we provide a low-complexity suboptimal approach termed the semi-correlated semi-orthogonal user selection (SC-SOUS) algorithm to enhance the spectrum efficiency. In the proposed algorithm, CUs that are highly correlated to the information decoding primary receiver (IPR) and mutually near orthogonal are selected for simultaneous transmission to reduce the interference to the IPR and increase the sum rate of the CRS. We further develop a spatial correlation-based resource sharing (SC-RS) strategy to improve energy sharing performance. CUs nearly orthogonal to the energy harvesting primary receiver (EPR) are chosen as candidates for user selection. Therefore, the EPR can harvest more energy from the CBS so that the energy utilization of the network can improve. Besides, zero-forcing precoding and power control are adopted to eliminate interference within the CRS and meet the transmit power constraints. Simulation results and analysis show that, compared with the existing CU selection methods, the proposed low-complex strategy can enhance both the achievable sum rate of the CRS and the energy sharing capability of the network.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.494-496
• /
• 2002

A bi-directional and multi-channel wireless telemetry capsule, 11mm in diameter, is presented that can transmit video images from inside the human body and receive a control signal from an external control unit. The proposed telemetry capsule includes transmitting and receiving antennas, a demodulator, decoder, four LEDs, and CMOS image sensor, along with their driving circuits. The receiver demodulates the received signal radiated from the external control unit. Next, the decoder receives the stream of control signals and interprets five of the binary digits as an address code. Thereafter, the remaining signal is interpreted as four bits of binary data. Consequently, the proposed telemetry module can demodulate external signals so as to control the behavior of the camera and four LEDs during the transmission of video images. The proposed telemetry capsule can simultaneously transmit a video signal and receive a control signal determining the behavior of the capsule itself. As a result, the total power consumption of the telemetry capsule can be reduced by turning off the camera power during dead time and separately controlling the LEDs for proper illumination of the intestine.

• 대한전자공학회논문지TC
• /
• 제45권11호
• /
• pp.61-68
• /
• 2008

본 논문은 차량용 UWB 레이더 시스템의 RF front-end 개발에 그 목적이 있다. UWB 시스템은 1ns 이하의 매우 좁은 펄스폭을 갖는 임펄스를 전송한다. 따라서 수 GHz에 이르는 매우 낮은 전력의 초광대역 특성을 갖게 되어 기존의 무선 통신 시스템과의 공존이 불가피하다. UWB의 장점은 높은 채널 용량과 데이터 전송률을 가지며, 다중 경로에 대한 세밀한 분해가 용이하여 위치 예측과 Rake 수신이 가능하다는 점이다. 또한 UWB는 저전력의 초광대역 특성을 나타내므로 낮은 간섭 특성을 가지며, 초단거리의 정밀함에 의해 위치 추적이 가능하며, 시스템 구현 비용을 절감할 수 있다. RF front-end 모듈은 DCR(Direct ConveRsion) 방식을 사용하여 설계하였으며, 저가의 차량용 RF단에 적합하게 구성을 하였다.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.681-687
• /
• 2017

This paper presents about an implementation of Video Transmitting and Receiving System(VTRS) for acquiring test data. The VTRS consists of two parts. The first is Transmitter Unit(TU) that is installed on a missile to acquire various kinds of data and transmit the data to the ground through RF signals. The second is Receiver Unit(RU) that receives the transmitted RF signals and reconstruct those to the original data. To gather a high speed data reliably and securely on the ground, the TU is designed by considering data transfer scheme, data compression, modulation method, encryption technic, link budget, and antenna radiation pattern. Further, a placement method of multiple receiving stations is suggested. The VTRS has been tested on a field to check the link margins and maximum receiving distance in a real environment. Finally, the VTRS is applied to a missile flight test and gathered high speed data reliably.

• 기술사
• /
• 제34권4호
• /
• pp.41-47
• /
• 2001

The paper describes SR3 (Synchronous Round Robin with Reservations), a collision-free medium access control protocol for all-optical slotted packet networks based on WDM multi-channel ring topologies where nodes are equipped with one fixed-wavelength receiver and one wavelength-tunable transmitter SR3 is derived from the SRR and MMR protocols previously proposed by the same authors for the same class of all-optical networks. SRR and MMR already achieve an efficient exploitation of the available bandwidth, while guaranteeing a throughput-fair access to each node. SR3, In addition, allows nodes to reserve slots. thereby achieving a stronger control on access delays; it is thus well suited to meet tight delay requirements, as it is the case for multimedia applications. Simulation results show that SR3 provides very good performance to guaranteed qualify traffic, but also brings signigicant performance improvements for best-effort traffic. Energy effciency is an important issue for optical network since they must rely on their batteries. We present a novel MAC protocol that achieves a good energy efficiency of optical interface of the network and provides support for diverse traffic types and QoS. The scheduler of the base station is responsible to provide the required QoS to connections on the optical link and to minimise the amount of energy spend by the High speed Network. The main principles of the MaC protocol are to avoid unsuccessful actions, minimise the number of transitions , and synchronise the mobile and the base-station. We will show that considerable amounts of energy can be saved using these principles.

• 천문학회보
• /
• 제35권1호
• /
• pp.65.2-65.2
• /
• 2010

We present a result of $^{13}CO$(1-0) survey toward the Outer Galactic Plane using the multi-beam receiver system recently installed on the 14 m telescope at Taeduk Radio Astronomy Observatory(TRAO). Our first target region is from $l=108^{\circ}$ to $113^{\circ}$ and $b=-1^{\circ}$ to $+1^{\circ}$, and some extended regions are included where emission is still arising. All data are on 50" grid. Velocity resolution is 0.63 km/sec, and the total velocity range is from -150 km/sec to 100 km/sec. A total of 40,000 spectra were obtained. The rms noise is about 0.2 K per channel for unsmoothed raw data. We will present a few initial results of the survey database.

• 한국시뮬레이션학회논문지
• /
• 제12권4호
• /
• pp.73-81
• /
• 2003

An Ad Hoc network is a dynamic multi-hop wireless network that is established by a group of mobile hosts on a shared wireless channel by virtue of their proximity to each other. Since wireless transmissions are locally broadcast in the region of the transmitting host, hosts that are in close proximity can hear each other and are said to be neighbors. The transitive closure of the neighborhood of all the hosts in the set of mobile hosts under consideration forms an Ad Hoc network. Thus, each host is potentially a router and it is possible to dynamically establish routes by chaining together a sequence of neighboring hosts from a source to a destination in the Ad Hoc network. In a network, various real-time services require the network to guarantee the Quality of Services provided to the receiver. End-to-end QoS can be provided most efficiently when each layer of the protocol stack translates the requirements of the application into layer classified requirements and satisfies them. In this study, a mechanism to guarantee the QoS in Ad Hoc networks with buffer nodes is proposed. They effectively prevent traffic congestion and yield better transmission rate. In this way QoS is enhanced.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권4호
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.

• 한국군사과학기술학회지
• /
• 제24권2호
• /
• pp.165-174
• /
• 2021

This study describes a method of measurement and verification of array manifold of uniform circular array antenna applicable to multistatic Passive Coherent Location(PCL) system using FM broadcasting. In an environment of outdoor test where FM broadcast signals are scattered, array manifold measurement methods using network analyzer and multi-channel digital receiver are introduced. Also, the descriptions and solutions for the test limits of each measurement method and the considerations affecting the measurement accuracy are presented. In addition, to verify the validity of the measured array manifold, the gain and phase difference were compared with the array manifold data obtained by EM simulation, and the effectiveness and accuracy of the measured array manifolds were compared and analyzed by estimating the direction of arrival of the FM broadcast signal received from the multistatic PCL system.

• 방송공학회논문지
• /
• 제15권1호
• /
• pp.63-75
• /
• 2010

본 논문에서는 8VSB 기반의 DTV 방송시스템에서 동일 채널 중계기에 적용 가능한 등화기 알고리즘에 대해 분석하고, 이를 통해 궤환신호에 의한 에러 전파를 감소 시키는 동시에, 수신 성능을 향상 시킬 수 있는 있는 등화기 구조를 제안한다. 궤환 신호의 효율적 제거 여부를 확인하기 위하여 LMS (Least Mean Square) 기반의 DFE (Decision Feedback Equalizer) 와 Correlation LMS 등의 알고리즘 분석을 통해, 이와 연동할 수 있는 다중레벨의 상관 LMS 기법을 제안하고, 이를 기존 방식들과 비교해 봄으로써 효율적으로 에러전파 현상을 크게 감소 시키는 것을 확인할 수 있었다. 컴퓨터 모의실험 수행시, DTV 방송 시스템 환경에 널리 사용되는 브라질 채널 모델을 적용하여 등화기 알고리즘을 서로 비교 분석하여 그 결과를 도출하였다. DTV 방송시스템에서 동작 수신 SNR 값인 15~25dB 까지 범위에서의 심볼 에러율 및 MSE (Mean Square Error) 등을 살펴보았다. 기존의 방식들과 비교해 본 결과 제안방식이 동일한 비트 에러 오류 정정 성능을 유지하는데 필요한 신호대 잡음비가 약 2~5 dB 정도 감소 했고, MSE 를 통한 수렴속도 측면에서도 필요시간이 감소하였음을 알 수 있었다.