• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.488-498
• /
• 2005

The DAB(Digital Audio Broadcasting) service which is based on the Eureka-147 of Europe is developed to DMB(Digital Multimedia Broadcasting) service that is divided into Terrestrial DMB and Satellite DMB. The Satellite DMB is a new broadcasting service, which will service multi-channel multimedia broadcasting by the portable receiver or the vehicle receiver. In this paper, we consider that link level performance of satellite DMB system A which is based on the COFDM(Coded Orthogonal Division Multiplexing). It uses the OFDM method which is sensitive to nonlinearity, so we analyze the effect of the HPA(High Power Amplifier) nonlinearity. And then we define the appropriate back-off value by performing the link level simulation considering back-off effect. Also we consider the effect of frequency and time offset, and then confirm the overall link level performance by analyzing and verifying a suitable synchronization method for satellite DMB system A.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.9
• /
• pp.3172-3193
• /
• 2022

Cognitive radio-simultaneous wireless information and power transfer (CR-SWIPT) has attracted much interest since it can improve both the spectrum and energy efficiency of wireless networks. This paper focuses on the resource sharing between a point-to-point primary system (PRS) and a multiuser multi-antenna cellular cognitive radio system (CRS) containing a large number of cognitive users (CUs). The resource sharing optimization problem is formulated by jointly scheduling CUs and adjusting the transmit power at the cognitive base station (CBS). The effect of accessing CUs' spatial channel correlation on the possible transmit power of the CBS is investigated. Accordingly, we provide a low-complexity suboptimal approach termed the semi-correlated semi-orthogonal user selection (SC-SOUS) algorithm to enhance the spectrum efficiency. In the proposed algorithm, CUs that are highly correlated to the information decoding primary receiver (IPR) and mutually near orthogonal are selected for simultaneous transmission to reduce the interference to the IPR and increase the sum rate of the CRS. We further develop a spatial correlation-based resource sharing (SC-RS) strategy to improve energy sharing performance. CUs nearly orthogonal to the energy harvesting primary receiver (EPR) are chosen as candidates for user selection. Therefore, the EPR can harvest more energy from the CBS so that the energy utilization of the network can improve. Besides, zero-forcing precoding and power control are adopted to eliminate interference within the CRS and meet the transmit power constraints. Simulation results and analysis show that, compared with the existing CU selection methods, the proposed low-complex strategy can enhance both the achievable sum rate of the CRS and the energy sharing capability of the network.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.494-496
• /
• 2002

A bi-directional and multi-channel wireless telemetry capsule, 11mm in diameter, is presented that can transmit video images from inside the human body and receive a control signal from an external control unit. The proposed telemetry capsule includes transmitting and receiving antennas, a demodulator, decoder, four LEDs, and CMOS image sensor, along with their driving circuits. The receiver demodulates the received signal radiated from the external control unit. Next, the decoder receives the stream of control signals and interprets five of the binary digits as an address code. Thereafter, the remaining signal is interpreted as four bits of binary data. Consequently, the proposed telemetry module can demodulate external signals so as to control the behavior of the camera and four LEDs during the transmission of video images. The proposed telemetry capsule can simultaneously transmit a video signal and receive a control signal determining the behavior of the capsule itself. As a result, the total power consumption of the telemetry capsule can be reduced by turning off the camera power during dead time and separately controlling the LEDs for proper illumination of the intestine.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.11
• /
• pp.61-68
• /
• 2008

In this paper, we propose a RF front-end developments for vehicle UWB radar systems. UWB systems have a very narrow pulse width that is below 1ns. Therefore, UWB is designed to have broadband quality of low power several GHz and must coexist with the radio communication system. UWB's advantages include high channel capacity and data rate, because precise resolution for multi-path can easily position estimate and Rake receiver. Also, UWB has low interference because it displays broadband quality of low power. Positioning is made possible by short range accuracy, which can reduce the expense of system design. An RF front-end module is designed using the DCR(Direct ConveRsion) method and is composed in RF for vehicles at a low-cost.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.681-687
• /
• 2017

This paper presents about an implementation of Video Transmitting and Receiving System(VTRS) for acquiring test data. The VTRS consists of two parts. The first is Transmitter Unit(TU) that is installed on a missile to acquire various kinds of data and transmit the data to the ground through RF signals. The second is Receiver Unit(RU) that receives the transmitted RF signals and reconstruct those to the original data. To gather a high speed data reliably and securely on the ground, the TU is designed by considering data transfer scheme, data compression, modulation method, encryption technic, link budget, and antenna radiation pattern. Further, a placement method of multiple receiving stations is suggested. The VTRS has been tested on a field to check the link margins and maximum receiving distance in a real environment. Finally, the VTRS is applied to a missile flight test and gathered high speed data reliably.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.4
• /
• pp.41-47
• /
• 2001

The paper describes SR3 (Synchronous Round Robin with Reservations), a collision-free medium access control protocol for all-optical slotted packet networks based on WDM multi-channel ring topologies where nodes are equipped with one fixed-wavelength receiver and one wavelength-tunable transmitter SR3 is derived from the SRR and MMR protocols previously proposed by the same authors for the same class of all-optical networks. SRR and MMR already achieve an efficient exploitation of the available bandwidth, while guaranteeing a throughput-fair access to each node. SR3, In addition, allows nodes to reserve slots. thereby achieving a stronger control on access delays; it is thus well suited to meet tight delay requirements, as it is the case for multimedia applications. Simulation results show that SR3 provides very good performance to guaranteed qualify traffic, but also brings signigicant performance improvements for best-effort traffic. Energy effciency is an important issue for optical network since they must rely on their batteries. We present a novel MAC protocol that achieves a good energy efficiency of optical interface of the network and provides support for diverse traffic types and QoS. The scheduler of the base station is responsible to provide the required QoS to connections on the optical link and to minimise the amount of energy spend by the High speed Network. The main principles of the MaC protocol are to avoid unsuccessful actions, minimise the number of transitions , and synchronise the mobile and the base-station. We will show that considerable amounts of energy can be saved using these principles.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.65.2-65.2
• /
• 2010

We present a result of $^{13}CO$(1-0) survey toward the Outer Galactic Plane using the multi-beam receiver system recently installed on the 14 m telescope at Taeduk Radio Astronomy Observatory(TRAO). Our first target region is from $l=108^{\circ}$ to $113^{\circ}$ and $b=-1^{\circ}$ to $+1^{\circ}$, and some extended regions are included where emission is still arising. All data are on 50" grid. Velocity resolution is 0.63 km/sec, and the total velocity range is from -150 km/sec to 100 km/sec. A total of 40,000 spectra were obtained. The rms noise is about 0.2 K per channel for unsmoothed raw data. We will present a few initial results of the survey database.

• Journal of the Korea Society for Simulation
• /
• v.12 no.4
• /
• pp.73-81
• /
• 2003

An Ad Hoc network is a dynamic multi-hop wireless network that is established by a group of mobile hosts on a shared wireless channel by virtue of their proximity to each other. Since wireless transmissions are locally broadcast in the region of the transmitting host, hosts that are in close proximity can hear each other and are said to be neighbors. The transitive closure of the neighborhood of all the hosts in the set of mobile hosts under consideration forms an Ad Hoc network. Thus, each host is potentially a router and it is possible to dynamically establish routes by chaining together a sequence of neighboring hosts from a source to a destination in the Ad Hoc network. In a network, various real-time services require the network to guarantee the Quality of Services provided to the receiver. End-to-end QoS can be provided most efficiently when each layer of the protocol stack translates the requirements of the application into layer classified requirements and satisfies them. In this study, a mechanism to guarantee the QoS in Ad Hoc networks with buffer nodes is proposed. They effectively prevent traffic congestion and yield better transmission rate. In this way QoS is enhanced.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.2
• /
• pp.165-174
• /
• 2021

This study describes a method of measurement and verification of array manifold of uniform circular array antenna applicable to multistatic Passive Coherent Location(PCL) system using FM broadcasting. In an environment of outdoor test where FM broadcast signals are scattered, array manifold measurement methods using network analyzer and multi-channel digital receiver are introduced. Also, the descriptions and solutions for the test limits of each measurement method and the considerations affecting the measurement accuracy are presented. In addition, to verify the validity of the measured array manifold, the gain and phase difference were compared with the array manifold data obtained by EM simulation, and the effectiveness and accuracy of the measured array manifolds were compared and analyzed by estimating the direction of arrival of the FM broadcast signal received from the multistatic PCL system.