• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.49.2-49.2
• /
• 2013

We present a result of $^{13}CO$(1-0) survey toward the Outer Galactic Plane using the multi-beam receiver system recently installed on the 14 m telescope at Taeduk Radio Astronomy Observatory(TRAO). Our target region is from l=$120^{\circ}$ to $133^{\circ}$ and b=$-1^{\circ}$ to $+1^{\circ}$, and some extended regions are included where emission is still arising. All data are on 50" grid. Velocity resolution is 0.63 km/sec, and the total velocity range is from -150 km/sec to 100 km/sec. A total of 140,000 spectra were obtained. The rms noise is about 0.18 K per channel for unsmoothed raw data. We will present a few initial results of the survey database.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.1-14
• /
• 2019

This paper considers a multiple-input multiple-output (MIMO) power line communication (PLC) network where interference alignment (IA) technique is used to mitigate the interference that arises in multi-user networks. IA as a precoding technique requires perfect channel state information (CSI) to achieve maximum multiplexing gain. Due to the common-mode reception at the receiver ports, we assume imperfect CSI for the IA precoding design. Here, the CSI is quantized and sent via feedback to the transmit ports. For different levels of CSI quantization, we evaluate the performance of various IA algorithms via Monte Carlo simulations. Simulation results reveal the superior performance of the proposed scheme due to common-mode reception in IA MIMO PLC networks. It is shown that for a quantization level of 5 bits, the CM reception improves the sum-rate by up to 70%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1238-1246
• /
• 2000

In a multi-channel network based on wavelength division multiplexing (WDM), an efficient protocol is needed for transmitter and receiver to be tuned to same wavelength during message transmission time. This paper proposes a message scheduling protocol that can efficiently support variable-sized messages, where tunable transceiver has nonzero tuning time. In this protocol, once a node reserves one data channel, it can persistently use the reserved channel till message transmission is finished. Therefore, overhead due to tuning time of the tunable transceiver can be reduced. Moreover, the protocol does not require any global information. Therefore, it can operate independently of the change of the number of nodes, and any new node can join the network at anytime without requiring network initialization. With this protocol, one can avoid data channel and destination conflicts. The protocol is analyzed with a finite population model and the throughput-delay characteristics are investigated as performance measures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.248-256
• /
• 2003

Space-time coding was designed for an efficient transmit diversity technique to improve performance of wireless communication. For the transmit diversity using space-time coding, the receiver requires to estimate channel parameters corresponding to each transmit antennas. In this paper, we propose an efficient channel estimation scheme based on trigonometric polynomial approximation in OFDM systems with transmit diversity using space-time coding. The proposed scheme is more efficient than the conventional scheme in terms of the computational complexity. For QAM modulation, when the size of FFH is 128, the conventional scheme with significant tap caching of 7 requires 9852 complex multiplications for TU, HT and BU channels. But the proposed scheme requires 2560, 7680 and 3584 complex multiplications for TU, HT and BU channels, respectively. Especially, for channels with smaller Doppler frequency and delay spreads, the proposed scheme has the improved BER performance and complexity. In addition, we evaluate the performance of maximum delay spread estimation in unknown channel. The performance of the proposed scheme is investigated by computer simulation in various multi-path fading environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.153-161
• /
• 2005

In a multi-channel network based of wavelength division multiplexing (WDM) technology, an efficient protocol is needed in order for the transmitter and receiver to be tuned to the same wavelength during message transmission time. This paper proposes a priority-based reservation protocol that can efficiently support variable-length messages that require different QoS requirements. In this proposed protocol, high-priority nodes can reserve the data channel before low-priority nodes. However, once a node reserves a data channel successfully, it can persistently use the reserved channel till message transmission is finished regardless of the priority of the node. Moreover, the protocol can operate independently of the number of nodes, and any new node can join the network anytime without requiring network re-initialization. The protocol is analyzed with a finite population model and the throughput-delay characteristics are investigated as performance measures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.7
• /
• pp.1044-1049
• /
• 1993

In this paper, it is shown that B-CDMA systems inherently reduce the effects of Multi Path fading phenomena which causes to degrade the performance of mobile communication systems. B-COMA systems use PN codes of high chip rates ( > 10 Mbps) and evaluate autocorrelation with the same code in the receiver. Therefore, it is possible that multipath signals, whose delay time is longer than one chip duration compared to the first signal, are removed. We model the wideband fading channel as a suitable linear filter, and perform computer simulation of signal transmission and reception. Graphic comparison of eye diagrams between the narrowband and wideband systems is shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.9-17
• /
• 2004

We present a performance improvement of Binary CDMA by flattening the correlation values. A Binary CDMA system, in which multi-leveled transmission signal of multi-code CDMA is clipped into a binary value, is cost-efficient since the strict linearity of the power amplifier is relieved. However, a loss of orthogonality among user channels due to the clipping causes the correlation values at the receiver to have a random distribution. If the correlation value for even a single channel goes too low, the average BER drops considerably. We developed a method of correlation flattening, where the binary chip pattern at the transmitter is adjusted so that the correlation values have averaged magnitude. Experimental results on several spreading codes show that the correlation flattening method increases the number of available channels at reduced BER.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.165-168
• /
• 2002

As the demand for higher data-rate chip-to-chip communication such as memory-to-controller, processor-to-processor increases, low cost high-speed serial links\ulcorner become more attractive. This paper describes a 0.25-fm CMOS 1.6Gbps/pin 4-level transceiver using Stub Series Terminated Logic for high Bandwidth. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by channel low pass effects, process-limited on-chip clock frequency, and serial link distance. The proposed transceiver uses multi-level signaling (4-level Pulse Amplitude Modulation) using push-pull type, double data rate and flash sampling. To reduce Process-Voltage-Temperature Variation and ISI including data dependency skew, the proposed high-speed calibration circuits with voltage swing controller, data linearity controller and slew rate controller maintains desirable output waveform and makes less sensitive output. In order to detect successfully the transmitted 1.6Gbps/pin 4-level data, the receiver is designed as simultaneous type with a kick - back noise-isolated reference voltage line structure and a 3-stage Gate-Isolated sense amplifier. The transceiver, which was fabricated using a 0.25 fm CMOS process, performs data rate of 1.6 ~ 2.0 Gbps/pin with a 400MHB internal clock, Stub Series Terminated Logic ever in 2.25 ~ 2.75V supply voltage. and occupied 500 * 6001m of area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.929-936
• /
• 2009

In this paper, we consider designing a multi-input multi-output (MIMO) overlay system for fixed MIMO wireless link, where a frequency flat narrowband channel is shared by multiple transmitter and receiver pairs. Assuming the perfect knowledge of the second-order statistics of the received legacy signals and the composite channels from the overlay transmitter to the legacy receivers, the jointly optimal linear precoder and decoder matrices of the MIMO overlay system is derived to minimize the total mean squared error (MSE) of the data symbol vector, subject to total average transmission power and zero interference induced to legacy MIMO systems already existing in the frequency band of interest. Furthermore, the necessary and sufficient condition for the existence of the optimal solution is also derived.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3447-3469
• /
• 2019

It is well-known that the cooperative communication and error control technology can improve the network performance, but most existing cooperative MAC protocols have not focused on how to cope with the contention process caused by cooperation and how to reduce the bad influence of channel packet error rate on the system performance. Inspired by this, this paper first modifies and improves the basic rules of the IEEE 802.11 Medium Access Control (MAC) protocol to optimize the contention among the multi-relay in a cooperative ARQ scheme. Secondly, a hybrid ARQ protocol with soft combining is adopted to make full use of the effective information in the error data packet and hence improve the ability of the receiver to decode the data packet correctly. The closed expressions of network performance including throughput and average packet transmission delay in a saturated network are then analyzed and derived by establishing a dedicated two-dimensional Markov model and solving its steady-state distribution. Finally, the performance evaluation and superiority of the proposed protocol are validated in different representative study cases through MATLAB simulations.