• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.229-235
• /
• 2001

The thermal and photometric properties of mulching materials modify the radiation and energy balance on the mulched soil surface and thereby change the soil temperature. The soil surface energy balances and soil temperatures under the mulching treatments of non-mulched control, recycled paper (RPM), and black polyethylene film (BPFM) were compared before and after the establishment of potato canopy. On August 30 in 1998 when potato was not emerged yet and solar radiation was 17.9 MJ $m^{-2}$${day}^{-1}$ , the net radiation of the soil surface was estimated as 10.(1, 2. 4, and 1.3 MJ $m^{-2}$${day}^{-1}$ under the control, BPFM, and RPM, respectively. The sensible and latent heat loss from the soil surface was 9.65 MJ $m^{-2}$${day}^{-1}$ in the control, most of the net radiation being lost through evaporation and convection, whereas it amounted only to 1.39 MJ $m^{-2}$${day}^{-1}$ in BPFM and 1.36 MJ $m^{-2}$${day}^{-1}$ in RPM. Therefore, the soil heat fluxes were 0.36 1.02, and 0.06 MJ m$^{-2}$ day$^{-1}$ under the control, BPFM and RPM, respectively. On September 27 when potato canopy was fully developed, the soil surface net radiation in the control was sharply decreased as compared to that of Aug. 30, whereas the net radiation of the mulched soil surfaces showed little changes. The soil heat flux was -0.01, 0.95, and 0.12 MJ $m^{-2}$${day}^{-1}$ at the soil surface under the control, BPFM and RPM, respectively. As the mulching treatments brought about such alteration of energy partitioning into the soil, the highest soil temperature was recorded in BPFM and the lowest in RMP without regard to potato canopy development. However, the soil temperature differences among the treatments become smaller when potato canopy were fully developed.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.4
• /
• pp.279-285
• /
• 2007

Soil physical properties in organic farming apple orchard were evaluated in relation to conventional farming to better understand the effects of organic farming system on soil quality. Two adjacent apple orchards, matched by soil type, were chosen to ensure the same pedological conditions except management system. Soil samples were collected from middle of two adjacent trees along the tree line at two depths of 5-20 and 20-35 cm in September 2006. Contents of organic matter in organic farming soil were twice as much as those found in soil of conventional farming. The higher level of organic matter in organic farming soil was reflected through a consequent trend in improved soil physical properties. Organic farming produced greater aggregation in >2 mm size and increased aggregate stability. Bulk density was lower by 13% and hence porosity was higher in soils of organic farming as compared with conventional farming. Water holding capacity was significantly greater with organic farming by >17% over conventional farming. The capacity of organic farming to improve soil physical properties can be contributed to the regular application of relatively large amount of organic materials and the sustainable ground-cover managements, mulching with compost and cover crop cultivation.

• Korean Journal of Weed Science
• /
• v.30 no.3
• /
• pp.272-281
• /
• 2010

The objective of this research was to find out the weed management techniques in environment-friendly rice paddy fields through the study on herbicidal effects and problems of various organic materials. This experiment was conducted under different conditions of weed species and weed densities in environment-friendly rice paddy fields. There was no difference in weedy efficacy on golden apple snail (GAS), paper mulching (PM), and machine weeding (MW) between low and high weed densities. However, the effect of weed control in rice bran (RB) and effective microorganism (EM) + molasses was higher in high weed density than in low weed density. In general, the effect of weed control as affected by various organic materials was in the order of GAS (97-100%) > PM (93-98%) > RB (15-80%) > EM (7-31%). GAS provided excellent control of all weed species tested except for Persicaria hydropiper. PM gave acceptable control of the weed species except for Echinochloa crus-galli, Ludwigia prostrata, and Eleocharis kuroguwai. However, MW gave fair control (70% biomass reduction) of all weed species tested. BR followed by MW or EM followed by MW treatments had similar effect on weed control compared to each treatment alone. However, BR followed by GAS or EM followed by GAS provided 100% control of weed species tested. The level of rice foliar injury caused by various organic materials was in the order of GAS and MW (10-20%) > RB (10-15%) > PM and EM (5-7%). Typical symptoms of organic materials are wilting, inhibition of growth, missing hill, and reduction of tiller. Cost for weed control of GAS, RB, EM, and PM were 2.1, 3.1, 2.3, and 13.2 times higher than that of the herbicide. These data indicate that GAS was the best method for weed management in environmentfriendly rice paddy fields. Further study is required to elucidate the mechanisms underlying the rice injury as affected by GAS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.202-210
• /
• 1983

These experiments were conducted to study the relationship among agronomic traits, varietal variation of grain-filling periods and the effect of environmental conditions on the grain-filling in the ten selected barley cultivars. The varietal variation of grain-filling periods was of significance: Tokak had the similar increment in both greenhouse and field plot, Suweon two row was believed to be an cultivar with short grainfilling period. Cultivars with higher grain-filling rates tended to. have significantly lower ash content. Ash content of a cultivar tended to be lower when grown under favorable condition. At maturity, the time of development of yellow or dark pigment at the crease base could be a possible criterion for physiological maturity determination. However, this requires further study. Average grain-filling period in the different conditions was constant, but varietal differences were 9 days in the greenhouse and 5 days in the field. The grain moisture content was not constant in accordance to both cultivars and growing conditions. Average accelerated days for heading and ripening periods were very constant in comparision with field and vinyl mulching suggests that the selected materials will be useful for genetic study on grain-filling periods. The cultivars and grown conditions with higher accumulated temperature per $100^{\circ}C$ from early grain-filling had larger grain-filling rates and heavier 1000 grain weight. This study showed that if the variation among and within cultivars is to be minimized, the greenhouse and vinyl mulching plots could be useful for genetic study on grain-filling periods in $BC_1$ and $F_2$ segregation.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.2
• /
• pp.158-161
• /
• 1993

This experiments were carried out determine planting date for highest Yields and select an covering material for enhancement of environments in Cassia tora L.The highest Yields by regressions estimate produced 352 kg/10a at May 18. of coure, it is possible to plant at June and early-July in spite of slight decreas of Yields, therefore Cassia tora L. is benefit to establish cropping system with barley, wheat or other crops. The covering materials for highest yielding was Black-white nonporous PE(low density) and it out yielded about 53% than conventional cultivations. Cassia tora L. is possible to produce Without agricultural medicines because of little occurence of decrease except occuring of Damping off(Rhizoctonia solanikuhn) at early planting.

• Journal of Biosystems Engineering
• /
• v.36 no.1
• /
• pp.9-14
• /
• 2011

This study was carried out to develop a vine crusher for harvesting sweet potato. The experimental two-row vine crusher attachable to agricultural tractor composed of vine crushing part with frail type vine crushing blades and vine lifting blades, power transmission part with chain and gear transmission mechanism, crushing height control part with two control wheels and manual levers, and implement frames, was designed and fabricated. And this vine crushing performance was also analyzed. From vine crushing tests, backward travel direction (i.e., rotational direction of the vine crushing blades) showed better vine crushing performance than forward travel direction. Crushing ratio of remained vine was increased, and length of remained vine and length of crushed vine were decreased as working speed was decreased and rotational speed of vine crushing blades was increased. At a working speed of 0.27 m/s and rotational speed of vine crushing blades of 800 rpm, crushing ratio of remained vine was 98%, length of remained vine was 104 mm, and length of crushed vine was 327 mm. But, when crushing vine on irregular ridges, vines and mulching vinyl were wound in the vine crushing part. Therefore, change of location of power transmission chain mechanism, and an automatic control device for controlling crushing height were needed.

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.5-12
• /
• 2006

Degradation performance of environmentally friendly plastics that can be disintegrated by combination of sunlight, microbes in soil, and heat produced in landfills was evaluated for use in industries. Two multi-degradable master batches (MCC-101 and MCC-102 were manufactured, separately mixed with polyethylene using film molding machine to produce 0.025 mm thick films, and exposed to sunlight, microbes, and heat. Low- and high-density polyethylene (LDPE and HDPE) films containing MCC-101 and MCC-102 became unfunctional by increasing severe cleavage at the surface and showed high reduction in elongation after 40 days of exposure to ultraviolet light. LDPE and HDPE films showed significant physical degradation after 100 and 120 days, respectively, of incubation at $68{\pm}2^{\circ}C$. SEM images of films cultured in mixed mold spore suspension at $30^{\circ}C$ and 85% humidity for 30 days revealed accelerated biodegradation on film surfaces by the action of microbes. LDPE films containing MCC-l01 showed absorption of carbonyls, photo-sensitive sites, at $1710\;cm${-1}$ when exposed to light for 40 days, whereas those not exposed to ultraviolet light showed no absorption at the same frequency. MCC-101-based LDPE films showed much lower $M_w$ distribution after exposure to UV than its counterpart, due to agents accelerating photo-degradation contained in MCC-101.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.9-15
• /
• 1986

To establish an efficient light control method using three covering materials on tunnel shaped rice seed-bed at greening stage after seedling emergence, four rice cultivars, Nampungbyeo, Taebaegbyeo, Seonambyeo, and Seomjinbyeo were sown on 15 April and 10 May in 1983 and 1984 respectively. After seedling emergence by a simplified emerging methods the seedling boxes were moved onto tunnel shaped seed-bed which was covered with combined matrials of PE film, silverpoly sheet, and spunbonded polyester fabric. For machine transplanting of rice seedlings in cases of early season and optimum season seeding in central part of Korea, PE film tunnel with silverpoly mulched, and PE film tunnel methods with spunbonded polyester fabric mulched reduced injuries of non-parasitic seedling damping-off and a albinism as affected by it, protected rice seedlings from injuries by extremely low temperature in the night, and reduced less differences in diurnal temperature than those in the other covering methods. At late season seeding for double cropping system of paddy field in southern part of Korea, a single silver-poly or a single spunbonded polyester fabric-covered tunnel method showed good green seedlings, and prevent-ed extreme rising of diurnal temperature by light interception in the tunnel.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.63-72
• /
• 2024

Poly (butylene adipate-co-terephthalate) (PBAT) is one of the representative biodegradable polymers with high ductility and processability to replace petroleum-based polymers. Many investigations have been conducted to broaden the applications of PBAT in a variety of industries, including the food packaging, agricultural mulching film, and logistics and distribution fields. Foaming process is widely known technique to generate the cell structure within the polymer matrix, offering the insulation and light weight properties. However, there was no commercially feasible foam product based on biodegradable polymers, especially PBAT, and maintaining a proper melt viscosity of the polymer would be a key parameter for the foaming process. In this study, chemical foaming agent and cross-linking agent were introduced to PBAT, and a compression molding process was applied to prepare a foam sheet. The correlation between cell morphological structures and mechanical and physical properties was evaluated. It was found that PBAT with foam structures effectively reduced the density and thermal conductivity, allowing them to be suitable for applications such as insulation and lightweight packaging or cushion materials.

• Korean Journal of Organic Agriculture
• /
• v.15 no.1
• /
• pp.109-121
• /
• 2007

For developing standard method for diease, pest and weed control in environmental friendly 'Ssam' vegetable cultivation, this study was carried out to investigating agriculture material use in organic agriculture and no pesticide cultivation for lettuce, kale, leafy perilla and korean cabbage. The 28.6% of investigated farmer carried out seed sterilization by seed selection with salt solution and soaking in chitosan that not validated. For raising seedling periods, the 55.6% of farmer did not use environmental-friendly agriculture material for, diease control and the 50% of farmer used one time for. pest control. Therefore, the control of disease and pest could be achieved with one or two times use of environmental-friendly agriculture material. Seed sterilization was carried out by soil solar sterilization, one time per year in 71.4% of farmer. Weed was controled by black PE film for weed germination of furrow in many farmer, by man-power weeding for weed of ridge in 85% of farmer and by machine weeding and mulching in some farmer. During cultivation period, the major pest were Aphis gossypii in lettuce, Plutella xylostella in kale, Plutella xylostella and Phyllotreta striolata (Fabricius) in korean cabbage and Pyrausta panopealis (Walke) in feat perilla. The many farmers used environ-mental-friendly agriculture material for control of pest over 10 times for spring season, and more used sold materials in market than home-made materials. In result, it needs to develop standardized method and validate cultivation methods for control of disease and pest, and seed sterilization treatment environmental-friendly 'Ssam' vegetable.