• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.127-131
• /
• 2008

In the disk braking of the railway trains, kinetic energy of the vehicles is converted into thermal energy by friction between a brake disk and the pad materials. This can be cause of the iterative thermal shock and generates thermal cracks on the brake disk surface. In this study, we show the comparative thermal fatigue test procedures and thermal crack analysis process to evaluate the thermal fatigue characteristics of candidate materials designed for development of heat-resistant brake disk material. We carried out tests on the conventional brake disk materials used for Saemaul and Mugunghwa trains, then we comparatively analyzed the thermal crack initiation and propagation on the surface of a specimen. A thermal fatigue test procedure and a crack analysis process were suggested to evaluate the heat resistance of the developed materials at later studies.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1816-1820
• /
• 2008

Indoor air quality in public transportation such as railway, subway and bus is hard to control because of spatial restrict and variation of passenger's number. On January 2007, The Ministry of Environment announced "the guideline of indoor air quality in public transportation" for the concentration managements of particulate matter and carbon dioxide. In this study, we measured the PM10 concentration inside the Mugunghwa-ho passenger cabin and outdoor air and counted passengers. By the statistical analysis using SigmaPlot 2001 and SPSS 13.0, we found that indoor PM10 concentration is significantly affected by outdoor air. It is suggested that the air quality of inflow to the passenger cabin for air exchange must be controlled to support the indoor environment comfortably.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.9-16
• /
• 2007

This study aims to suggest an evaluation method of thermal environment using CFD, not an experiment, which is usual in the field. Model train is the newly introduced Mugunghwa train. Since its compartment occupies a large space and chairs and other accessories make it a complicated structure, 3-D calculation might take too much time and effort to make evaluation itself possible. Therefore, we suggest a 2-D model to replace the original 3-D model for averaged temperature and temperature distribution in the cabin.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.592-596
• /
• 2005

This study analyzed changes of train operation between Seoul~Cheonan after the introduction of new electrified rail in 2005. As expected number of passengers were reduced at specific service section and several railroad stations which were served by the Mugunghwa. Also, the statistic shows that passenter demand concentrated in a specific time, so train service frequency and level of service need to be modified to meet with changed demand pattern. The purpose of this paper is to identify critical demand pattern, especially, in several section of the railroad system. This studies provide a railroad transportation system that is significantly more efficient, with far greater capacity, by providing solutions to the problems of congestion impact.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1747-1755
• /
• 2008

In domestic interurban railway which runs between miles away city has foot rest for each chair. One of the interurban train Muunghwa, the chair can rotate in each direction. When chair rotates the foot rest gets damaged related to the position. Up to now many various solution was made to clear this problem but effect was insufficient. So solve this problem, approach was made in human body engineering point of view. Also Advanced country case study was made. Through this research the field point of issue will be cleared and so as customer satisfaction. This paper describes the effective methode to improve the foot rest damage problem.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.172-177
• /
• 2009

Mugunghwa Satellite N0.1 is fired after operation was 13 years. The establishment of communication satellites, as well as Internet service backbone network the country, including satellite broadcasting services to provide multimedia services to general users and contribute to have a big role. High-speed Internet Access Network was expanded and satellite Internet subscribers Access Network rapidly decreasing, but it also a difficult situation, satellite communications network is still important as a component is located. Launched the first communication satellite to be launched and operated several commercial communications satellite, but satellite communications services and the pace of the system is in place. In this paper VSAT, satellite communications service to provide a service based on the status and problems of the status of operating system and will present alternative policies to solve.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.865-872
• /
• 2009

Korean railroad company is continuously improving the service for the disabled. They also install and reform many facilities for them. However, It is not considered the importance of egress when fire occurred in a cabin Now, Fire hazard analysis and risk assessment are introduced into domestic regulations for improving fire safety performance of train car and railroad facilities. Considering the fact that fire safety evaluation process doesn't fully include disabled person, fundamental egress data for them is very important for life safety aspect. In this paper, Egress experiments and analysis were conducted to measure the movement speed of the disabled with Mugunghwa and Saemaul.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.442-449
• /
• 2000

Before the complete construction of new high-speed line between Seoul and Pusan, KTX is going to operate on both new high-speed line between Seoul and Daegu and electrified conventional lines between Daegu and Pusan. Then, the wheels of KTX are going to operate on various rails such as KS50N and KS60 of conventional line as well as UIC60 of high-speed line. Also, conventional line will have a mixed traffic mode with various types of trains operating on it, such as Saemaul and Mugunghwa. Hence, this study reviews the wear phenomena of wheels and rails in geometrical point of view by comparing their profiles. The analyses of the results show that because UIC60 rail is designed for KTX, KS50N rail whose profile is similar to that of UIC60 will not have any impact on the shape of wheel wear. On the other hand, KS60 rail is expected to have partial wear on both the flange of KTX wheel and the gauge corner of the rail in the initial stages. However, the operation of the trains whose wheels have 1/20 conicity will cause partial sidewear on the inside of the rail and the movement of the contact point between KTX wheel and the rail toward the inside of the track. As a result, the flange wear of KTX wheel will be reduced and the formation of wear-equilibrium profile will be faster.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.529-538
• /
• 2009

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. Therefore, in this study, the dynamic rail force of the tilting (Hanvit 200), high-speed (KTX) and general (Mugunghwa) vehicle caused by driving in transition curve track was measured. And, it compared the tilting response with the other by using the measured wheel load data in transition curve track, and then evaluated probability the range of wheel load fluctuation for the variable dynamic vertical and lateral wheel load. As a result, a range of wheel load by occured a change of cant from the high-speed and general vehicle which had fixed bogie structure was distributed throughout small deviation (${\Delta}8{\sim}13kN$). Otherwise, in case of the tilting train which was consisted of the pendulum bogie structure was distributed wide range about large deviation (${\Delta}25{\sim}28kN$) by changed of cant.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.4
• /
• pp.299-305
• /
• 2015

A statistical annoyance model to railway noise at platform was proposed by jury evaluation test performed in hearing laboratory. ITX-Saemaeul and Mugunghwa were chosen as the noise sources of the test, and announcement sound was included to simulate real situation. Logistic regression analysis produced %HA_LAB curve. Hosmer-Lemeshow test and classification accuracy test were used to verify the model's statistical significance. It was shown that the model which was generated from relatively small number of samples is statistically significant.