• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.763-772
• /
• 2021

Drilling Mud Treatment Systems are widely used for Oil Gas drilling mud circulation, horizontal directional drilling mud recycling, geothermal drilling, mining, coal exploration drilling, water well drilling. Degasser is a device used in drilling to remove gasses from drilling fluid which could otherwise form bubbles. For small amounts of entrained gas in a drilling fluid, the degasser can play a major role of removing small bubbles that a liquid film has enveloped and entrapped. As with the desander, its purpose is to remove unwanted solids from the mud system. The smaller cones allow the desilter to efficiently remove smaller diameter drill solids. In this study, a simulation study is conducted on the degasser of the facility in the Mud Treatment System to conduct a performance review on the gas separation in the mud.

• 대한환경공학회지
• /
• 제37권4호
• /
• pp.210-217
• /
• 2015

Red mud의 염산처리와 열처리에 의한 불소의 제거 특성을 살펴보고자 동역학적 흡착, 평형흡착, pH, 흡착제의 주입량에 따른 흡착특성, 그리고 칼럼을 이용한 연속식 조건에서의 불소흡착 특성을 살펴보았다. Red mud의 산처리는 HCl 0.8 M 농도에서 효과적이었고, 열처리 온도가 높음에 따라 흡착량이 감소하였다. 0.8 M로 산처리한 Red mud (0.8 M-ATRM)의 동역학적실험 결과 초기농도 50 mg-F/L는 30분대에 평형농도에 도달하였고, 초기농도 500 mg-F/L에서는 1시간대 흡착평형을 나타내었다. 0.8 M-ATRM은 단층흡착을 가정한 Langmuir 모델에 잘 부합하였고, 최대흡착량($Q_m$)은 23.162 mg/g으로 나타났다. 또한 낮은 pH에서 높은 불소 흡착경향을 나타내었다. 이는 높은 pH에서 불소와 $OH^-$가 경쟁관계를 형성하기 때문으로 판단된다. 0.8 M-ATRM의 주입량이 증가 할수록 제거율은 높아졌지만, 단위질량당 흡착량은 감소하였다. 본 연구에서 사용된 0.8 M-ATRM은 가격이 저렴할 뿐만 아니라 불소에 높은 흡착능을 나타내어 수중 불소 제거에 효과적인 흡착소재로 판단된다.

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.1033-1042
• /
• 2020

Shale shaker which is one of the mud circulation systems is composed of a basket, a vibrator and a screen. Its purpose of a shale shaker is to induce drilling fluid to flow through a screen, transport solids across a screen surface, and discharge solids off the end of the screen. The new shale shaker for the on-shore drilling system is designed to be smaller than the original shale shaker which has the same capacity with the new on to enable to transport and to operate on the trailer. In this study, structural and vibrational analysis of shale shaker was carried out to evaluate the appropriateness of the design in terms of the structural stability.

• 한국농공학회논문집
• /
• 제55권5호
• /
• pp.17-23
• /
• 2013

Six-valent chromium ($Cr^{6+}$) is a highly toxic pollutant, supplied in a variety of industrial activities such as leather tanning, cooling tower blowdown, and plating. Herein, we investigated the removal of $Cr^{6+}$ from aqueous phase using low-cost adsorbents. Steel slag, montmorillonite, illite, kaolinite, red mud, and acid treated red mud with 0.5, 1.0, and 2.0 M HCl were used as adsorbent for the removal of $Cr^{6+}$ and the results showed that acid treated red mud with 2.0 M HCl (ATRM-2.0 M) had higher adsorption capacity of $Cr^{6+}$ than other adsorbents used. Accordingly, $Cr^{6+}$ removal by ATRM-2.0 M were studied in a batch system with respect to changes in initial concentration of $Cr^{6+}$, initial solution pH, adsorbent dose, adsorbent mixture, and seawater. Equilibrium sorption data were described well by Freundlich isotherm model. The influence of initial solution pH on $Cr^{6+}$ adsorption was insignificant. The use of the ATRM-2.0 M alone was more effective than mixing it with other adsorbents including red mud, zeolite, oyster shell, lime stone, and montmorillonite for the removal of $Cr^{6+}$. The $Cr^{6+}$ removal of the ATRM-2.0 M was slightly less in seawater than deionized water, resulting from the presence of anions in seawater competing for the favorable adsorption site on the surface of ATRM-2.0 M. It was concluded that the ATRM-2.0 M can be used as a potential adsorbent for the removal of $Cr^{6+}$ from the aqueous solutions.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1063-1069
• /
• 2022

In modern industry, vacuum has grown into an indispensable industrial field. The performance of the vacuum pump in the degasser system among mud treatment system facilities was verified by a numerical analysis method. The degasser system is an equipment for removing the gas contained in the mud, and it is a work process that requires a vacuum. This study analyzed the vacuum pump performance of the degasser used in drilling for resource development of onshore and offshore plants. The vacuum pump used in the degasser system was designed with a discharge rate of 0.099kg/s. The DM(Design Modeler) program of ansys workbench 17.2 was used to modify the model of the vacuum pump used in the degasser system. And for performance analysis, CFX, which is known to be suitable for rotating system analysis, was used. Finally the performance analysis results of the vacuum pump and the prototype performance test results were compared and analyzed.

• 셀메드
• /
• 제4권1호
• /
• pp.3.1-3.8
• /
• 2014

Spa represents a treatment widely used in many rheumatic diseases (RD). The mechanisms by which immersion in mineral or thermal water ameliorates RD are not fully understood. The net benefit is probably the result of a combination of factors, among which the mechanical, thermal and chemical effects are most prominent. Buoyancy, immersion, resistance and temperature play important roles. According to the gate theory, pain relief may be due to the pressure and temperature of the water on skin; heat may reduce muscle spasm and increase the pain threshold. Mud-bath therapy increases plasma ${\beta}$-endorphin levels and secretion of corticotrophin, cortisol, growth hormone and prolactin. It has recently been demonstrated that thermal mud-bath therapy induces a reduction in circulating levels of prostaglandin E2, leukotriene B4, interleukin-$1{\beta}$ and tumour necrosis factor-${\alpha}$, important mediators of inflammation and pain. Furthermore, balneotherapy has been found to cause an increase in insulin-like growth factor-1, which stimulates cartilage metabolism, and transforming growth factor-${\beta}$. Beneficial anti-inflammatory and anti-degenerative effects of mineral water were confirmed in chondrocytes cultures, too. Various studies in vitro and in humans have highlighted the positive action of mud-packs and thermal baths, especially sulphurous ones, on the oxidant/antioxidant system. Overall, thermal stress has an immunosuppressive effect. Many other non-specific factors may also contribute to the beneficial effects observed after spa therapy in some RD, including effects on cardiovascular risk factors (e.g. adipokines) and changes in the environment, pleasant surroundings and the absence of work duties.

• 보존과학연구
• /
• 통권7호
• /
• pp.278-291
• /
• 1986

In this report the practical case of Viking ship's conservation in Denmarke specially among the Eurpoean nations is introduced. The contents of it are summarized as follows :From 1957 to 1962 the Danish National Museum Salvaged five Viking ships from the bottom of Roskilde Fjord, Which were composed of the pieces of timber whose surface was soft because they had lain on the sea bed for about a thousand years. Excavation had been carried out in the same way as in the field by driving down a sheet piling around the wrecks and pumping the water out. These pieces of the wreck ships were packed in airtight plastic bags one by one to be transported for Brede and then immidiately had to go through the treatment for conservation. The conservation treatment process for the pieces includes three steps ; the preliminary process prior to the hardening treatment, the hardening and the assemble of the ships. In the first step ; the preliminary process, all remains of mud and shells from the fjord bed are washed off, and measuring followed ; every single piece of wreckage was drawn so that the form and size of the piece, nail holes, and breaks were registered before conservation. In the second ; the hardening treatment step, the pieces of the woreckage were filled with P.E.G. This Polyethylene Glycol method was the best to handle in the subsequent mounting of the ships in the museum. In the final, the Glycol-treated pieces were pieced together to spips with support of a system of reinforcements. They were to fit in place after corrections of the form were made several times.

• 미생물학회지
• /
• 제38권4호
• /
• pp.281-286
• /
• 2002

2000년 1 월부터 2000년 10월까지 가두리 양식장에서 Vibrio vulnificus를 검출하였고 이들의 억제 방법을 연구하였다. 이 세균의 검출은 선택적 분리법과 vvhA 유전자를 확인하는 방법을 이용하였다. V. vulnificus는 수온이 $17^{\circ}C$이상인 5월부터 검출되었고 $19^{\circ}C$ 이상인 6월부터 9월까지는 대부분의 시료에서 검출되었다. V. vulnificus를 제어하기 위한 방법 중 냉동 및 냉장 처리는 살균효과를 나타내지 못했다. Citric acid도 균의 생장을 억제하지 못했으나, 500 mg/1이상의 EDTA가 첨가될 경우 균이 완전히 사멸되었다. 분말 광촉매인 산화티타니움은 자외선을 조사할 경우 15분～1 시간 이내에 이 세균을 완전히 사멸시키는 효과를 나타내었다. 산화티타니움을 유리 구슬에 코팅한 광촉매 장치를 이용하여 0.2/min의 turnover rate로 사멸효과를 얻었다.

• 해양환경안전학회지
• /
• 제13권4호
• /
• pp.119-125
• /
• 2007

현재 중소형선박의 동력전달용 스테인리스 추진축계가 많이 사용되고 있으나 선미를 통과하는 선미관 패킹부, 베어링이 작용하는 접촉부 등에서 마모, 축의 재질불량이나 설계 불량으로 인하여 축이 절손되는 경우가 많다. 프로펠러축이 과다마모 또는 절손으로 파단시 새로운 축으로 전환하고 있으나 축을 새것으로 구입하려면 주문, 제작 등에 따라 상당한 비용이 소요된다. 또한 축을 육성 용접하는 경우는 해양수산관청의 승인을 득하도록 되어 있으나 지금까지 승인이 된 경우가 없었다. 따라서 이 연구에서는 직접 스테인리스 재료를 육성 용접하면서 모재와 비교하여 용접에 따른 금속조직의 변화, 결함의 계측 등을 규명하여 해양수산관청의 승인에 필요한 용접 절차, 검사에 필요한 사항 등을 검토하였다.