• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.704-710
• /
• 2017

Our research team is developing a 6-DOF manipulator that is adequate for the narrow workspace of press forming processes. This paper addresses the task sequence optimization methods for the manipulator to minimize the task-finishing time. First, a kinematic model of the manipulator is presented, and the anticipated times for moving among the task locations are computed. Then, a mathematical model of the task sequence optimization problem is presented, followed by a comparison of three meta-heuristic methods to solve the optimization problem: an ant colony system, simulated annealing, and a genetic algorithm. The simulation shows that the genetic algorithm is robust to the parameter settings and has the best performance in both minimizing the task-finishing time and the computing time compared to the other methods. Finally, the algorithms were implemented and validated through a simulation using Mathworks' Matlab and Coppelia Robotics' V-REP (virtual robot experimentation platform).

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.23-29
• /
• 2002

Five and more leg intersections have been still in operation in many urban areas. The number of conflicts in five leg intersection is more than four leg intersection. The signal timing design in the five leg intersection should be performed not only to reduce delay but also to increase safety. This paper suggests safety enhanced signal phase sequence design of a rotary with five leg intersection such as phase sequence minimizing the number of conflict points at the rotary with five leg intersections and the phase-length-design procedure by utilizing the Traffic Network Study Tool(TRANSYT). Field data was collected from Gonguptap five leg intersection in Ulsan and TRANSYT-7F was applied for signal timing design model. Optimal signal phase length and sequence of TRANSYT-7F is rearranged based on the Principal of "two moving traffic flows per phase". In conclusion, proposed signal phase design increased delay by 6.2% compared with the optimal signal phase of TRANSYT-7F. However, it could decrease the number of conflict in the five leg intersection by 61.5%.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.370-381
• /
• 2021

This paper presented an efficient transceiver structure of multiband Frequency Shift Keying (FSK) signals with direct sequence spread spectrum for maintaining covertness and performance. In aspect to covertness, direct sequence spread spectrum method, which multiplying by Pseudo Noise (PN) codes whose rate is much higher than that of data sequence, is employed. In aspect to performance, in order to overcome performance degradation caused by multipath and Doppler spreading, we applied multiband, turbo equalization, and weighting algorithm are applied. Based on the simulation results, by applying 4 number of multiband and number of chips are 8 and 32, experiments were conducted in a lake with a distance of moving from 300 m to 500 m between the transceivers. we confirmed that the performance was improved as the number of bands and chips are increased. Furthermore, the performance of multiband was improved when the proposed weighting algorithm was applied.

• Journal of KIISE:Databases
• /
• v.36 no.4
• /
• pp.327-340
• /
• 2009

To achieve the noise reduction effect in boundary image matching, we use the moving average transform of time-series matching. Our motivation is based on an intuition that using the moving average transform we may exploit the noise reduction effect in boundary image matching as in time-series matching. To confirm this simple intuition, we first propose $\kappa$-order image matching, which applies the moving average transform to boundary image matching. A boundary image can be represented as a sequence in the time-series domain, and our $\kappa$-order image matching identifies similar images in this time-series domain by comparing the $\kappa$-moving average transformed sequences. Next, we propose an index-based matching method that efficiently performs $\kappa$-order image matching on a large volume of image databases, and formally prove the correctness of the index-based method. Moreover, we formally analyze the relationship between an order $\kappa$ and its matching result, and present a systematic way of controlling the noise reduction effect by changing the order $\kappa$. Experimental results show that our $\kappa$-order image matching exploits the noise reduction effect, and our index-based matching method outperforms the sequential scan by one or two orders of magnitude.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.48-56
• /
• 1998

In this paper, a moving object detection and face region extraction algorithm which can be used in video monitoring systems is presented. The proposed algorithm is composed of two stages. In the first stage, each frame of an input video sequence is analyzed using three measures which are based on image pixel difference. If the current frame contains moving objects, their skin regions are extracted using color and frame difference information in the second stage. Since the proposed algorithm does not rely on computationally expensive features like optical flow, it is well suited for real-time applications. Experimental results tested on various sequences have shown the robustness of the proposed algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.6 no.4
• /
• pp.92-101
• /
• 1996

Due to I:he rapid increase of vehicles and poor availability of roads, traffic congestion problem is about to explode. To solve this problem, we need real time information about traffic flow to control traffic signals dynamically. Until now loop coil is the most prevalent sensor used for obtaining traffic flow information. However, it is not able to track individual vehicles which is essential in estimating the average vehicle speed. As a result, image sensors started to find their role in this problem domain. Several systems based on image sensors were proposed which assumes either gray level or color image sequence. In this paper, we propose moving vehicle tracking method based on fizzy clustering assuming a wlor image sequenc.

• Journal of Digital Contents Society
• /
• v.14 no.1
• /
• pp.117-124
• /
• 2013

This paper suggests the robust method of extraction for moving objects in illumination variation by using image sequence from an immovable camera. The most difficult part of the implication is the effect by illumination and noise. The object area is hardly estimated when the dusky area occurs in illumination variation by time change. This thesis describes the extraction of moving objects employed by Gaussian mixture model which is noise robust measure. Also, the report suggests the elimination method of illumination part in input image by the representative illumination image which is defined to minimize the illumination influence.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.31-38
• /
• 2011

This paper introduces a video based traffic monitoring system for detecting vehicles and obstacles on the road. To segment moving objects from image sequence, we adopt the background subtraction algorithm based on the local binary patterns (LBP). Recently, LBP based texture analysis techniques are becoming popular tools for various machine vision applications such as face recognition, object classification and so on. In this paper, we adopt an extension of LBP, called the Diagonal LBP (DLBP), to handle the background subtraction problem arise in vision-based autonomous parking systems. It reduces the code length of LBP by half and improves the computation complexity drastically. An edge based shadow removal and blob merging procedure are also applied to the foreground blobs, and a pose estimation technique is utilized for calculating the position and heading angle of the moving object precisely. Experimental results revealed that our system works well for real-time vehicle localization and tracking applications.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.81-87
• /
• 2020

A stable rotational-to-linear motion transformation structure using a driving mechanism with 2 degrees of freedom was developed for an orthogonal mechanism to prevent the interference of each axis in 2D motion. In this mechanism, a step motor was used for precise position control. This structure was developed to maneuver workparts in micro particle blast machining experiments. To determine the real-time performance of micro particle blast machining, the control, input, and output were operated simultaneously and precise position control was implemented, using a timer interrupt with multiple execution codes. The two step motors obtained precise position control by removing backlash with a ball-screw mechanism. The device has menu-type control codes for user-friendliness, and real-time sequence control was simultaneously adopted for user control input.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.45-53
• /
• 2011

This paper is technical review about Direct Sequence Spread Spectrum(DSSS) to apply in launch vehicle system. First, we introduce communication protocol(carrier frequency, code length, process gain, data rate, chip rate etc) about several application system using DSSS. And then, we survey and summarize the effect of doppler shift to the DSSS. The doppler shift is important error factor for PN code tracking in the fast moving system like launch vehicle. So, spread spectrum code acquisition technique for a direct sequence system in the presence of doppler effect must be investigated.